• Journal of Food Hygiene and Safety
• /
• v.10 no.4
• /
• pp.231-237
• /
• 1995

Bacillus subtilis SH-1 have been isolated and identified from coastal sea, in Pusan, The optimal cultural characterization of Bacillus subtilis SH-1 for 속 production of bacteriolytic enzyme was determained. Bacillus subtilis SH-1 produced the bacteriolytic enzyme well in the medium consist of 1.0% glucose, 1.0% yeast extract, 1.0% NaCI, 0.02% $K_2HPO_4,\;0.002%\;MgSo_4{\cdot}7H_2O,\;0.001%\;MnSO_4{\cdot}5H_2O,\;0.0001%\;FeSO_4{\cdot}7H_2O$. The optimal medium pH, incubation temperature, and shaking tome for the highest production of the enzyme were 8.0, $30^{\circ}C$ and 28 hours respectively.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.1
• /
• pp.19-25
• /
• 1996

Chitosanase from Bacillus sp. HW-002 was purified with CM-cellulose column chromatography, and HPLC with DEAE- TSK gel and YMC-pack Diol 120. The purified enzyme appeared as a single band on SDS-polyacrylamide gel. The molecular weight of the enzyme was estimated to be about 46 kDa on SDS-polyacrylamide gel, and was estimated to be about 23 kDa by GFC. The optimal pH of chitosanolytic activity was about pH 5.5-6.0, and the purified enzyme was most stable at pH 5.0. The optimal temperature of chitosanolytic activity was $65^{\circ}C$ and the enzyme was stable at $45^{\circ}C$ for 1 h. Chitosan was the most favorable substrate among various $\beta$-glucan. UVmax of the purified enzyme was 195 nmand was not noted around 280 nm. The main product of enzyme reaction with chitosan was chitobiose.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.120-121
• /
• 2007

In this paper, ZnO thin films were deposited by pulsed laser deposition (PLD) on $Al_2O_3$ (alumina) at room temperature in various $O_2$ ambient. Rapid thermal annealing (RTA) has been performed at temperatures from $400^{\circ}C$ to $700^{\circ}C$. The effects of temperature and ambient on the structural property of ZnO films were examined by x-ray diffractometer (XRD) and atomic force microscopy (AFM), respectively. The results show that the (002)-oriented ZnO thin films on non-single crystal alumina were obtained in over 30mTorr ambient at all RTA temperatures including room temperature. The foil-width half maximum (FWHM) of (002) peak decreases as the RTA temperature increases, which indicates that ZnO thin films with RTA have improved crystalline quality.

• Preventive Nutrition and Food Science
• /
• v.2 no.4
• /
• pp.281-284
• /
• 1997

Heat-induced gelation is an important functional property of whey proteins. Preheating of calcium reduced whey was reported to increase gel strength. 5% whey-protein solutions were preheated at pH7 and at various temperatures(60~8$0^{\circ}C$) for 15 minutes. The amount of soluble aggregates and denaturation enthalpy of preheated whey proteins were measured. Preheating temperature was negatively correlated with denaturation enthalpy($R^2$=0.857, P=0.08) and positive with the amount of soluble aggregates($R^2$=0.921, P=0.002). Denaturation enthalpy was negatively correlated with gel strength($R^2$=0.93, P=0.002). Soluble aggregates and gel strength were positively correlated($R^2$=0.972, P=0.0003). The formation of three dimensional gel network requires controlled protein denaturation and aggregation. Since preheating leads to the partial denaturation of proteins and the formation of soluble aggregates, preheated whey proteins have a higher gel strength than non-preheated one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.1036-1038
• /
• 2001

The sapphire orientation dependence of the crystallization of ZnO thin films has been studied using real-time synchrotron x-ray scattering. The amorphous ZnO thin films with a 2400-${\AA}$-thick were grown on sapphire(110) and sapphire(001) substrates by radio frequency magnetron sputtering at room temperature. The amorphous ZnO films were crystallization into epitaxial ZnO(002) grains both on the sapphire(110) and on the sapphire(001) substrates. The epitaxial quality, such as mosaic distribution and crystal domain size, of the ZnO grains on the sapphire(110) is high, similar to that of the ZnO grains on the sapphire(001). With increasing the annealing temperature to 600$^{\circ}C$, the mosaic distribution and the crystal domain size of ZnO(002) grains in the film normal direction was improved and decreased, respectively.

• Journal of the Korean Ceramic Society
• /
• v.30 no.2
• /
• pp.164-168
• /
• 1993

Grinding of 3mol% Y-TZP enhanced the texturing of t-ZrO2, which is represented by the increased I(002)t/I(200)t peak intensity ratio, and an asymetric broadening of (111)t peak. The degree of texturing and asymetric broadening depended on a seversity of grinding. The asymetric (111)t peak broadening was resulted by the formation of r-ZrO2. When aged at 25$0^{\circ}C$ for 120h, r-ZrO2 transformed to t-ZrO2 due to the relief of stressed surface area and the amount of tlongrightarrowm transformation inversely varied with the I(002)t/I(200)t. The inverse dependence was interpreted by that the degree of texturing determines the magnitude of residual surface stress and the lattice relaxation of t-ZrO2, which causes the low temperature degradation, is retarded as the residual stress becomes greater.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.2
• /
• pp.58-61
• /
• 2016

Bulk GaN crystals were grown by the basic ammonothermal method. The c-plane GaN templates grown by hydride vapor phase epitaxy were used as seed crystals and sodium metal, amide, and azide were added as a mineralizer. The growth conditions are at temperatures from $500{\sim}600^{\circ}C$ and pressures from 2~3 kbar. The growth rate for the c-axis was increased with increasing the operating pressure. Average dislocation density was measured $1{\times}10^5/cm^2$ by the cathodoluminescence measurement. The full-width at half-maximum of the X-ray diffraction rocking curve for (002) reflection was approximately 270 arcsec for Ga face and 80 arcsec for N face.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.287-293
• /
• 1983

Free radical-initiated copolymerizations of diethyl ${\alpha}$-phenylvinyl phospbate (DEPVP) with acrylonitrile (AN) and maleic anhydride (MAnh) were studied. The monomer reactivity ratios for AN/DEPVP pair, determined at $70^{\circ}C$ in bulk using benzoyl peroxide as an initiator, were;$ r_1(AN) = 0.77, r_2(DEPVP) = 0.002$. The values of the Alfrey-Price constants, Q and e, for DEPVP were calculated to be 0.012 and -1.35, respectively. Free radical-initiated copolymerization of MAnh/DEPVP pair in chloroform at $70^{\circ}C$ produced 1 : 1 alternating copolymers regardless monomer feed composition with the highest copolymerization rate at the molar ratio of MAnh : DEPVP = 7 : 3. The equilibrium constant of a charge-transfer complex between DEPVP and MAnh in deutrated chloroform, determinated at room temperature by transformed Benesi-Hildebrand NMR method, was 0.085 l/mol. The reduced viscosity of copolymers of AN/DEPVP pair decreased as the content of DEPVP units increased, while that of MAnh/DEPVP pair remained more or less constant.

• Journal of the Mineralogical Society of Korea
• /
• v.3 no.2
• /
• pp.89-97
• /
• 1990

To examine how London energy controls the c-dimensions of phyllosilicates, London energy, as well as Coulomb and Pauli repulstion energy was calculated as a function of d(001) for 1M and d(002) for 2M 1 phyllosilicates. London and Pauli repulstion energy calcualtion use a direct interaction calculation method and Coulomb energy calculation adopts Fourier synthesis method. The energy calculations show that Coulmb and Pauli repulsion energy dominantly control the c-dimensions of phyllosilicates having the interlayer cationss, i.e., the layer charges. On the other hand, if phyllosilicates have no interlayer cations, London energy is solely responsible for holding the layers and maintain the c-dimensions. The significance of London energy in determining the c-dimensions of phyllosislicates de-creases as the layer charge increases. When the layer charge is lower than one equivalent on the basis of Oη(OH)2 formula, London energy plays an important role in determing the c-dimensions. however, if the layer charge is higher than one equivalent, London energy becomes insignifi-cant in determining the c-dimension.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.107-113
• /
• 2013

Purpose: To verify accuracy of respiratory gated proton therapy by measuring and analyzing proton beam delivered when respiratory gated proton therapy is being performed in our institute. Materials and Methods: The plan data of 3 patients who took respiratory gated proton therapy were used to deliver proton beam from proton therapy system. The manufactured moving phantom was used to apply respiratory gating system to reproduce proton beam which was partially irradiated. The key characteristics of proton beam, range, spreat-out Bragg peak (SOBP) and output factor were measured 5 times and the same categories were measured in the continuous proton beam which was not performed with respiratory gating system. Multi-layer ionization chamber was used to measure range and SOBP, and Scanditronix Wellhofer and farmer chamber was used to measure output factor. Results: The average ranges of 3 patients (A, B, C), who had taken respiratory gated proton therapy or not, were (A) 7.226, 7.230, (B) 12.216, 12.220 and (C) 19.918, 19.920 $g/cm^2$ and average SOBP were (A) 4.950, 4.940, (B) 6.496, 6.512 and (C) 8.486, 8.490 $g/cm^2$. And average output factor were (A) 0.985, 0.984 (B) 1.026, 1.027 and (C) 1.138, 1.136 cGy/MU. The differences of average range were -0.004, -0.004, -0.002 $g/cm^2$, that of SOBP were 0.010, -0.016, -0.004 $g/cm^2$ and that of output factor were 0.001, -0.001, 0.002 cGy/MU. Conclusion: It is observed that the range, SOBP and output factor of proton beam delivered when respiratory gated proton therapy is being performed have the same beam quality with no significant difference compared to the proton beam which was continuously irradiated. Therefore, this study verified the quality of proton beam delivered when respiratory gated proton therapy and confirmed the accuracy of proton therapy using this.