• 한국의류학회지
• /
• 제32권12호
• /
• pp.1963-1970
• /
• 2008

전통적인 니남쪽염료 제조법을 기준으로 굴껍질가루 대신 칼슘하이드록사이드를 사용하여 천연인디고분말염료를 만들었다. 제조한 인디고분말염료에 대한 텐셀의 염색성을 몇 가지 실험조건에서 조사하였으며 염색견뢰도를 측정하였다. 제조한 인디고분말염료는 약 15.5%의 인디고 성분과 0.757%의 인디루빈 성분을 함유하는 것으로 분석되었다. 환원과 염색을 자동염색기로 one-step으로 하였으며 환원제로 소디움하이드로설파이트를 사용하였다. 최대염착량은 $60^{\circ}C$에서 얻었으며 초기 20분 동안에 염착이 거의 이루어졌다. 본 연구의 실험조건 범위에서는 염료농도 4g/L까지는 2g/L의 환원제 농도에서, 염료농도 8g/L에서는 3g/L의 환원제 농도에서 최대염착량을 보였다. 텐셀은 염욕에 가성 소다를 넣지 않고 pH 5.75에서 염색할 때 훨씬 높은 염착량을 나타냈다. 염색견뢰도는 4/5-5등급으로 대체로 우수하였으며, 염착량이 낮을수록 더 높은 광퇴색을 보였다.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.663-668
• /
• 2017

염색 산업에서 발생하는 염색폐수는 적절한 처리가 필요한 유해 폐수로 분류된다. 파이롯트 규모의 선택적 무촉매 환원반응 (SNCR) 실험 장치에서 염색폐수를 연소 배가스에 포함된 질소산화물을 효과적으로 저감할 수 있는 첨가제로 사용하는 연구를 수행하였다. 염색 산업에서 배출되는 염색폐수는 환원제의 첨가제로 사용되기 위해서는 표준화된 제제 형태이어야 하며 이를 위해 여러 단계의 정제과정을 거쳤다. 엄격하게 처리되어야 할 염색폐수는 적어도 유용성 면에서 약 87%의 NO 저감 효율을 보일 정도로 만족할 만한 효율을 보이나, CO 제거에서는 거의 효과가 없는 것으로 나타났다. 첨가제 첨가효과는 $750-1150^{\circ}C$ 구간에서 처음에는 온도가 증가함에 NO 제거 효율이 증가하다가 그 다음에는 감소하는 형태를 보인다. 최적의 온도조건에서 최대의 NO 제거 효율은 87% 이었다. 염색폐수에 포함된 약 1000ppm의 Na 화합물의 영향으로 NO 저감 효율 면에서 약 10%의 효율 향상이 있었으며, 이와 더불어 첨가제를 첨가하지 않은 경우에 비해 $N_2O$ 저감 효율과 SNCR 반응의 반응온도 확장 면에서 뚜렷한 효율 증진을 얻을 수 있었다.

• 한국의류학회지
• /
• 제32권6호
• /
• pp.928-934
• /
• 2008

본 연구는 염색공정의 표준화와 재현성을 확립하기 위해 흥화 황색소의 견섬유에 대한 염색성을 조사하는데 목적 이 있다. 홍화 황색소는 물로 추출한 후 농축, 동결건조하여 분말상태로 만들어 사용하였다. 염색온도 및 시간, 염료농도, 염액의 pH 등에 따른 염착성과 색상 변화에 대해 조사하였으며, 세탁 및 광견뢰도를 평가하였다. 염색온도가 증가함에 따라 염착량은 증가하였으며 $30^{\circ}C$에서 염색할 때 가장 선명한 노랑색을 얻을 수 있었다. 염료농도가 증가함에 따라 염착량이 계속 증가하여 점점 진하고 어두운 노랑색이 되었다. pH 3.5에서 최대염착량을 보였으며, 최적조건에서 색차는 1.11-2.01로서 재현성은 양호하였다. 색소와 견섬유간의 결합은 pH 5.5 부근에서는 주로 수소결합에 의해, 등전점(pH 3.8-4.0) 이하에서는 수소결합과 함께 이온결합이 관여하는 것으로 판단되었다. 세탁(드라이크리닝)견뢰도는 4/5둥급으로 좋은 편이었으나 일광견뢰도는 2/3등급이었다.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.35-41
• /
• 2008

This study investigated the dyeing properties of silk fabrics with Annatto. The dye stuff was extracted by distilled water at $60^{\circ}C$, 10minutes, 1:100 of bath ratio. Dyeability(K/S) and color fastness of silk fabrics were tested under conditions of various concentrations, time, temperature, repeat-numbers of dyeing, pH, mordants variables and methods of mordanting. The highest absorbance was found in methanol extract of Annatto. The optimum dyeing concentration, time and temperature of silk fabrics with Annatto were 25%(o.w.f.), 60min and $60^{\circ}C$ respectively. The K/S value showed higher in post-mordanting than in pre-mordanting, and especially post-Fe mordant showed highest K/S value. In the case of colorfastness, Cu-mordanted fabrics were good washing fastness. Dry cleaning fastness appeared 4-5 grades and light fastness showed lowest grade.

• 한국염색가공학회지
• /
• 제29권1호
• /
• pp.1-10
• /
• 2017

Blended knit with two or more fiber has various dyeing characteristics depending on dyeing method because of different material properties of them. In this paper, newly developed blended knit was used. It was composed by Acrylate fiber and Dyeable polypropylene(DPP) fiber. As result of build-up dyeing test, acid dyes and disperse dyes respectively had good dyeabilities on 1% o.w.f. with Acrylate fiber and DPP fiber. Compatibility of trichromatic of disperse dyes was generally good for most dyes investigated and their critical absorption range were between $120^{\circ}C$ and $130^{\circ}C$. As depending on dyeing methods, there were many differences in dyeability. It was confirmed that 1-bath-1-step dyeing was most suitable when considering dye exhaustion yield and levelling property. Wash, rubbing and light fastness of knits were generally good in most dyes.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2004년도 춘계학술발표회 논문집
• /
• pp.296-301
• /
• 2004

We focused our research interests on the characteristic of silk fabrics dyed with green tea extracts and, moreover, revealed the catechin content of silk fabrics after dyeing with Korean tea extract by measuring the residues. Three kinds of green tea samples were taken between April and May, 2003, from Bosung(southern province in South Korea), in different terms as the first corp, the second corp, and the third corp. Before and after dyeing the silk fabrics with these extracts, catechins in the residue were analyzed by HPLC. Four kinds of Catechins, such as (-)-epicatechin(EC), (-)-epicatechin gallate(ECG), (-)-epigallocatechin (EgC), (-)-epigallocatechin gallate(EgCG) were isolated from Korean green tea extracts. Catechine contents in Korean green tea leaves depend on the making process such as heating and steaming, and the younger the richer. The absorbed catechins in sillk fabrics after dyeing followed in a decreasing order of EgCG>EgC>ECG>EC. We have found a 68% uptake of EgCG, and 116.8mg/g of EgCG in the silk fabrics after dyeing with 1% Korean green tea extracts.

• 한국염색가공학회지
• /
• 제16권6호
• /
• pp.16-22
• /
• 2004

This study was carried out to investigate K/S values, surface color, the fastness to washing, bacteria reduction rate of the silk and cotton fabrics dyed with Rhus verniciflua extract under the various dyeing conditions. The optimum dyeing temperature, dyeing time, dyeing pH and repetition of the silk fabrics dyed with Rhus verniciflua extract were $l00^{\circ}C, 30min., pH 5, five times repetition respectively, but in the cotton fabrics, it were $60^{\circ}C . 30min., pH 7, one times repetition. It were colored orangish Yellow in the silk fabrics and colored bright yellow in the cotton fabrics dyed with Rhus verniciflua extract. Surface color(munsell value) was not changed by the mordanting agents but those of the silk showed high tone when mordanting with stannous chloride, and it was decolored and darked when mordanting with ferric sulfate. The fastness to washing in the silk fabrics dyed with mordanting agents improved in 4～5 grade, but the cotton fabrics were 3～4 grade, so washing fastness of the silk and cotton fabrics were significantly improved when washing with the neutral detergent. The bacteria reduction rate of the silk fabrics increased drastically by dyeing of Rhus verniciflua extract.

• 한국의류학회지
• /
• 제26권9호
• /
• pp.1301-1307
• /
• 2002

This paper surveys the mordanting and dyeing properties of Rubia akane Nakai appropriate extraction, dyeing and mordanting conditions of Rubia akane Nakai were determined, and the effect of mordanting method on dye uptake and color fastness of the dyed fabric was investigated. The optimum temperature to extract Rubia akane Nakai was during 1 hour in 8$0^{\circ}C$. The effective dyeing temperature and time of silk were 8$0^{\circ}C$, 1hour. The silk fabrics dyed with purpurin appeared red color, with alizarine appeared yellow-brown and with Rubia akane Nakai appeared yellow orange. K/S value of the dyeing fabrics was increased by pre-mordanting treatment. Mordant as Sn and Fe was better than anything else in K/S value. Mordanting treatment method affected color change of the dyed silk. In the case of Rubia akane Ntkai light fastness was increased by Fe and Al mordant treatment, Perspiration fastness of Rubia akane Nakai appeared more than 3 grades geneally. Fastness of abrasion and dry-cleaning appeared mon than 4～5 grades and these fastness improvement were generally effective for post-mordanting treatment.

• 한국염색가공학회지
• /
• 제15권2호
• /
• pp.59-67
• /
• 2003

PTT[poly(trimethylene terephthalate)] fiber was annealed by passing on the plate heater to illuminate the effects of annealing on the mechanical properties and dyeability with varying the treatment temperature for 0.5 second. The apparent crystal sizes and crystallinity were increased with increases in temperature. With the increases of the temperature, the dynamic viscoelastic behaviors were analyzed to be reduction in $T_{max} (tan{\delta})$. The initial modulus were observed to be a small enhanced. The shrinkage in hot water were reduced. The dyeability for disperse dye enhanced dramatically, for example, a satisfactory degree of exhaustion was obtained by dyeing at $95^\circ{C}$ for 30 min with the PTT fibers heat treated at $180^\circ{C}$.

• 한국염색가공학회지
• /
• 제7권1호
• /
• pp.10-22
• /
• 1995

Cellulosic fabrics, i.e. rayon, polynosic, and linen were treated with liquid ammonia at -33.4$^{\circ}C$. The fine structures, bending properties, tensile strength, wrinkle recoveries, and dyeing properties of the treated fabrics were studied. Dyeing was carried out with two direct dyes, C. I. Direct Red 2 and Blue 1. The liquid ammonia treatment for three fabrics brought about the transition of crystal lattices and the decrease of crystallinity; transforming cellulose I structure of original linen to cellulose I and III structure, and cellulose II structure of original rayon and polynosic to cellulose II and III structure. Moisture regain of liquid ammonia- treated polynosic and linen was higher than that for untreated, and water absorbency of liquid ammonia-traeated fabrics was all lower than that of untreated. Also, bending properties of treated fabrics were not improved compared with those of untreated ones. The rayon treated with liquid ammonia was increased not only the apparent diffusion coefficient and the rate of dyeing but also equilibrium dye adsortion, whereas polynosic and linen were increased only equilibrium dye adsortion. It is suggested that the pore sizes of liquid ammonia-treated rayon, polynosic, and linen are much smaller than that of liquid ammonia-treated cotton.