• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.3
• /
• pp.265-276
• /
• 2014

In this study, we suggested 4 plans to reduce non-point pollutant sources in Dongcheon and analyzed their controlling effects by water quality modeling, XP-SWMM. To do this we identified the influx of non-point pollutant sources to the initial rainwater through the water quality survey in the river and analyzed the causes of them at major locations, and suggested 4 kinds of plans reducing non-point pollutant sources. Plans reducing the non-point pollutant sources through cleaning the industrial road around the river(plan A), through a separate treatment facilities like the gutter(plan B), through installing treatement facilities(plan C), or through combing plan B and C(plan D) were analyzed using XP-SWMM model. The analysis showed that plan A, B, C and D reduced non-point pollutant sources average 21.7 %, 24.7 %, 49.3 %, 56.7 % respectively. Therefore, the water quality pollution in Dongcheon due to the influx of non-point pollutant sources is considered to be reduced effectively though cleaning the road, installed at the exits of paddy or factory basins, invasion type facilities or equipment-type facilities.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.59.1-59.1
• /
• 2011

I present an analysis of the long-term evolution of the fluxes of six active galactic nuclei (AGN) - 0923+392, 3C 111, 3C 273, 3C 345, 3C 454.3, and 3C 84 - in the frequency range 80 - 267 GHz using archival calibration data of the IRAM Plateau de Bure Interferometer. Our dataset spans a long timeline of ~14 years with 974 - 3027 flux measurements per source. We find strong (factors ~2-8) flux variability on timescales of years for all sources. The flux density distributions of five out of six sources show clear signatures of bi- or even multimodality. Our sources show mostly steep (alpha~0.5-1), variable spectral indices that indicate outflow dominated emission; the variability is most probably due to optical depth variations. The power spectra globally correspond to red-noise spectra with five sources being located between the cases of white and flicker noise and one source (3C 111) being closer to the case of random walk noise. For three sources the low-frequency ends of their power spectra appear to be upscaled in spectral power by factors ~2-3 with respect to the overall powerlaws. We conclude that the source emission cannot be described by uniform stochastic emission processes; instead, a distinction of "quiescent" and (maybe multiple) "flare" states of the source emission appears to be necessary.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.6
• /
• pp.792-796
• /
• 1993

The synthesis alcohol-oxidase[EC 1.1.3.13] was investigated in the yeasts, Candida boidinii CBS 8106 and C. boidinii CBS 2428, during growth on different carbon sources. Alcohol-oxidase was undetectable in all strains submitted to the test in the mineral salts medium containing 1.0% glucose, but its production was rapidly increased when the carbon source was changed glucose to 1.0% methanol after 24hrs of incubation. When cells were grown on the various carbon sources (glucose, xylose, lactose, glycerol, galactose, saccharose, sorbose, lactic acid or acetic acid), the alcohol-oxidase activity was undetected. These carbon sources together with methanol yielded far better synthesis of alcohol-oxidase than in the case of carbon sources alone. Alcohol-oxidase was active towards alcohol of shorter alkyl-chain length than C5 and unsaturated alcohols. Its affinity for these alcohols decreased with the increasing length of the alkyl-chain. The apparent Km values for the methanol of Candida boidinii CBS 8106 and C. boidinii CBS 2428 were 1.96 and 1.21, respestively.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.102-106
• /
• 1992

Effects of nitrogen souses and C/N ratio were investigated on the production of extracellular microbial surfaclant, sophorolipid, from C. bombiocola. Organic nitrogen sources, such as urea, peptone and yeast extract was found to be more effective for sophorolipid production, than inorganic nitrogen sources. Depending on the nitrogen sources, sophorolipid production pattern varied by increasing C/N ratio. Increased production of sophrolipid could be obtained up to 90g/L by feeding carbon source again 2 days after cultivation.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.7
• /
• pp.332-338
• /
• 2005

PD(Partial Discharge) signal emitted from PD sources has their intrinsic features in the region of time and frequency STFT(Short Time Fourier Transform) shows time-frequency distribution at the same time. 2-Dimensional matrices(33$\times$77) from STFT for PD pulse signals are a good feature vectors and can be decreased in dimension by wavelet 2D data compression technique. Decreased feature vectors(13$\times$24) were used as inputs of Back-propagation ANN(Artificial Neural Network) for discrimination of Multi-PD sources(air discharge sources(3), surface discharge(1)). They are a good feature vectors for discriminating Multi-PD sources in the air.

• Journal of Korean Home Economics Education Association
• /
• v.13 no.2
• /
• pp.1-14
• /
• 2001

The purpose of this study was to find out and advocate the intake of vitamin A and C rich foods in Korean people. Forty kinds of vitamin A and C rich foods were selected by the vitamin quantity in 100g edible portion. in single serving size. and by the 1997 national food supply data. The results were summarized as follows. 1. The vitamin A rich foods 1) The food sources of vitamin A presented in the middle and high school home economics textbooks were liver. egg/egg yolk. milk/dairy products. and green and yellow vegetables. etc. 2) The vitamin A rich foods by 100g edible portion ere in order of red pepper(dried). laver(dried). carrot. meat edible viscera. eel. etc. And the vitamin A rich foods by the vitamin A content in single serving size were in order of carrot. eel. meat edible viscera. water shield. red pepper(dried). etc. 3) The vitamin A suppling foods according to the 1997 national food supply data were in order of red pepper(dried). meat edible viscera. laver. carrot. etc. The green and yellow vegetables. fish and shellfish. and seaweeds were the most important sources of vitamin A in Korean. 2. The vitamin C rich foods 1) The food sources of vitamin C presented in the textbooks of middle and high school were strawberry. citrus fruits. and vegetables such as spinach. chinese cabbage. radish. crown daisy. etc. 2) The vitamin C rich foods on the basis of the vitamin C content in 100g edible portion were in order of sweet pepper. goose berry. citron. strawberry. water shield. etc. And the vitamin C rich foods by the quantity in single serving size were in order of strawberry. goose berry. citron. sweet pepper. lemon. etc. 3) The vitamin C suppling foods according to the 1997 national food supply data were in order of chinese cabbage. radish. citrus fruits. strawberry. etc. Not only vegetables and fruits but also seaweeds like dried laver and sea mustard were the most important source of vitamin C in korean.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.6
• /
• pp.391-396
• /
• 1997

Two series of carbon sources, linear primary $C_1$~$C_9$ alcohols and linear $C_2$~$C_{10}$ monocarboxylic acids were tested for PHA synthesis in Paracoccus denitrificans. The results showed that the growth-associated synthesis of PHA could be referred only to the carbon sources with odd number of carbon except methanol. For all carbon sources with even number of carbon, nitrogen limitation was required to induce PHA synthesis in P. denitrificans. Poly(3-hydroxyvalerate)[P(3HV)] homopolymer was synthesized from $C_5$, $C_7$, and $C_9$ while growing in the presence of nitrogen, but the nitrogen depletion in the later growth period incorporated 3-hydroxybutyrate(3HB) unit into the polymer chain. The optimum C/N ratio for P(3HV) homopolymer production was found to be 10 when the strain was grown on 10 ml/l of valeric acid for 96 h. P. denitrificans synthesized P(3HB-co-3HV) copolymers from n-hexanoic and n-octanoic acid. The microstructural characterics of the P(3HB-co-3HV) copolymer from n-propanol was investigated using $^13C$-nuclear magnetic resonance spectroscopy, showing a structural heterogeneity.

• Journal of the Korean institute of surface engineering
• /
• v.25 no.6
• /
• pp.293-298
• /
• 1992

Various vanadium-oxide thin films were deposited by e-beam and thermal evaporation of V2O5, V2O3, and VO2 powders. Films with thickness of $2000\AA$ were subjected to annealing at $300^{\circ}C$~$450^{\circ}C$ in N2 atmosphere for the crystallization and desification purposes. For the films deposited from V2O5 and VO2 sources, sources, Magneli (VnO2n-1$ 4\leq$ $n\leq$ 8) and VO2 phase appeared at $300^{\circ}C$, respectively, but VO2 phase also transformed into Magneli phase at $450^{\circ}C$ by severe reduction. On the contrary, VO2/VO mixed phases resulted from congruent evaporation of V2O3 unchanged after the same annealing treatment due to the balanced reduction and oxidation of VO2 and VO whcih have different equilibrium O2 pressures. It is suggested that the annealing in the controlled oxidation atmosphere or the deposition using mixed oxide sources are necessary to get the film containing VO2 phase.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1608-1615
• /
• 2016

This study was conducted to determine the solubility of copper (Cu) in two sources of copper(II) sulfate ($CuSO_4$) including monohydrate and pentahydrate and three sources of dicopper chloride trihydroxide (dCCTH) including ${\alpha}$-form (dCCTH-${\alpha}$), ${\beta}$-form (dCCTH-${\beta}$), and a mixture of ${\alpha}$- and ${\beta}$-form (dCCTH-${\alpha}{\beta}$) at different pH and a 3-step in vitro digestion assay for pigs. In Exp. 1, Cu sources were incubated in water-based buffers at pH 2.0, 3.0, 4.8, and 6.8 for 4 h using a shaking incubator at $39^{\circ}C$. The $CuSO_4$ sources were completely dissolved within 15 min except at pH 6.8. The solubility of Cu in dCCTH-${\alpha}$ was greater (p<0.05) than dCCTH-${\beta}$ but was not different from dCCTH-${\alpha}{\beta}$ during 3-h incubation at pH 2.0 and during 2-h incubation at pH 3.0. At pH 4.8, there were no significant differences in solubility of Cu in dCCTH sources. Copper in dCCTH sources were non-soluble at pH 6.8. In Exp. 2, the solubility of Cu was determined during the 3-step in vitro digestion assay for pigs. All sources of Cu were completely dissolved in step 1 which simulated digestion in the stomach. In Exp. 3, the solubility of Cu in experimental diets including a control diet and diets containing 250 mg/kg of additional Cu from five Cu sources was determined during the in vitro digestion assay. The solubility of Cu in diets containing additional Cu sources were greater (p<0.05) than the control diet in step 1. In conclusion, the solubility of Cu was influenced by pH of digesta but was not different among sources based on the in vitro digestion assay.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2545-2552
• /
• 2018

$SF_6$ has been widely used in high voltage power equipment, such as gas insulated switchgear (GIS) and gas insulated transmission line (GIL), because of its excellent insulation and arc extinguishing performance. However, $SF_6$ faces two environmental problems: greenhouse effect and high liquefaction temperature. Therefore, to find the $SF_6$ substitute gases has become a research hotspot in recent years. In this paper, the liquefaction characteristics of $SF_6$ substitute gases were studied. Peng-Robinson equation of state with the van der Waals mixing rule (PR-vdW model) was used to calculate the dew point temperature of the binary gas mixtures, with $SF_6$, $C_3F_8$, $c-C_4F_8$, $CF_3I$ or $C_4F_7N$ as the insulating gas and $N_2$ or $CO_2$ as the buffer gas. The sequence of the dew point temperatures of the binary gas mixtures under the same pressure and composition ratio was obtained. $SF_6/N_2$ < $SF_6/CO_2$ < $C_3F_8/N_2$ < $C_3F_8/CO_2$ < $CF_3I/N_2$ < $CF_3I/CO_2$ < $c-C_4F_8/N_2$ < $C_4F_7N/N_2$ < $c-C_4F_8/CO_2$ < $C_4F_7N/CO_2$. $SF_6/N_2$ gas mixture showed the best temperature adaptability and $C_4F_7N/CO_2$ gas mixture showed the worst temperature adaptability. Furthermore, the dew point temperatures of the $SF_6$ substitute gases at different pressures and the upper limits of the insulating gas mole fraction at $-30^{\circ}C$, $-20^{\circ}C$ and $-10^{\circ}C$ were obtained. The results would supply sufficient data support for GIS/GIL operators and researchers.