• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.53-56
• /
• 2008

In this investigation, results of laboratory tests on six reinforce concrete flat plate interior connections with elongated rectangular column support which has been used widely in tall residential buildings are presented. The purpose of this study is to evaluate an effect of column aspect ratio(${\beta}$c=$c_1/c_2$) on the hysteretic behavior under earthquake type loading. The aspect ratio of column section was taken as 0.33${\sim}$3($c_1/c_2$=1/3, 1/1, 3/1). Other design parameters such as flexural reinforcement ratio of slab and concrete strength was kept constant as ${\rho}$=1.0%, 1.5% and $f){ck}$=40MPa, respectively. Gravity shear load($V_g$) was applied by 30 percents of nominal vertical shear strength(0.3$V_o$) of the specimen. Experimental observations on punching failure pattern, peak lateral-load and story drift ratio at punching failure, and stiffness degradation were achieved and discussed in accordance with different column aspect ratio.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.278-281
• /
• 2001

A fixed bed biofilm reactor filled with ceramic media were used to remove nitrogen by selective nitrification (ammonium to nitrite). The effects of experimental conditions (nitrogen load, dissolved oxygen, nitrite ratio, C/N ratio) on denitrification were investigated. The reactor showed more than 80% average T-N removal efficiencies at T-N loading in the range of $1.1{\sim}3.3$ kg $T-N/m^3{\cdot}d$ C/N at the C/N ratio of 1. T-N removal efficiencies increased as nitrite ratio.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2019

Purpose: The purpose is to clarify the effect of additional scattering ratio on the edge of the block according to the increasing block thickness with low melting point lead alloy and pure lead in electron beam therapy. Methods and materials: $10{\times}10cm^2$ Shielding blocks made of low melting point lead alloy and pure lead were fabricated to shield mold frame half of applicator. Block thickness was 3, 5, 10, 15, 20 (mm) for each material. The common irradiation conditions were set at 6 MeV energy, 300 MU / Min dose rate, gantry angle of $0^{\circ}$, and dose of 100 MU. The relative scattering ratio with increasing block thickness was measured with a parallel plate type ion chamber(Exradin P11) and phantom(RW3) by varying the position of the shielding block(cone and on the phantom), the position of the measuring point(surface ans depth of $D_{max}$), and the block material(lead alloy and pure lead). Results : When (depth of measurement / block position / block material) was (surface / applicator / pure lead), the relative value(scattering ratio) was 15.33 nC(+0.33 %), 15.28 nC(0 %), 15.08 nC(-1.31 %), 15.05 nC(-1.51 %), 15.07 nC(-1.37 %) as the block thickness increased in order of 3, 5, 10, 15, 20 (mm) respectively. When it was (surface / applicator / alloy lead), the relative value(scattering ratio) was 15.19 nC(-0.59 %), 15.25 nC(-0.20 %), 15.15 nC(-0.85 %), 14.96 nC(-2.09 %), 15.15 nC(-0.85 %) respectively. When it was (surface / phantom / pure lead), the relative value(scattering ratio) was 15.62 nC(+2.23 %), 15.59 nC(+2.03 %), 15.53 nC(+1.67 %), 15.48 nC(+1.31 %), 15.34 nC(+0.39 %) respectively. When it was (surface / phantom / alloy lead), the relative value(scattering ratio) was 15.56 nC(+1.83 %), 15.55 nC(+1.77 %), 15.51 nC(+1.51 %), 15.42 nC(+0.92 %), 15.39 nC(+0.72 %) respectively. When it was (depth of $D_{max}$ / applicator / pure lead), the relative value(scattering ratio) was 16.70 nC(-10.87 %), 16.84 nC(-10.12 %), 16.72 nC(-10.78 %), 16.88 nC(-9.93 %), 16.90 nC(-9.82 %) respectively. When it was (depth of $D_{max}$ / applicator / alloy lead), the relative value(scattering ratio) was 16.83 nC(-10.19 %), 17.12 nC(-8.64 %), 16.89 nC(-9.87 %), 16.77 nC(-10.51 %), 16.52 nC(-11.85 %) respectively. When it was (depth of $D_{max}$ / phantom / pure lead), the relative value(scattering ratio) was 17.41 nC(-7.10 %), 17.45 nC(-6.88 %), 17.34 nC(-7.47 %), 17.42 nC(-7.04 %), 17.25 nC(-7.95 %) respectively. When it was (depth of $D_{max}$ / phantom / alloy lead), the relative value(scattering ratio) was 17.45 nC(-6.88 %), 17.44 nC(-6.94 %), 17.47 nC(-6.78 %), 17.43 nC(-6.99 %), 17.35 nC(-7.42 %) respectively. Conclusions: When performing electron therapy using a shielding block, the block position should be inserted applicator rather than the patient's body surface. The block thickness should be made to the minimum appropriate shielding thickness of each corresponding using energy. Also it is useful that the treatment should be performed considering the influence of scattering dose varying with distance from the edge of block.

• 한국해양학회지
• /
• v.29 no.2
• /
• pp.107-118
• /
• 1994

An investigation of the annual change and C:N:P ratio in particulate organic matter (POM) in Chinhae Bay, a semi-enclosed bay of the southern coast of Korean Peninsula, was carried out for a period of 12 months between January and December, 1993. The concentrations of POM have a broad range: 198∼4,416 ugC/l, 24∼792 ugN/l and 4.5∼69.0 ugP/l, Marked seasonal changes of POM, particularly particulate organic carbon (POC) and nitrogen (PON), were observed in the surface water. Generally, the concentration of POM peaks in summer. The C:N:P composition ratio of particulate organic matter, which is high in summer, also shows a seasonal change. The C:N assimilation ratio is constant at 6.53, which is consistent with the Redfield ratio. The significant linear relationship between POM and chlorophyll-a in the surface water during the survey period (except for January and February) and the C:N ratio suggest that the concentration of POM is controlled by phytoplankton biomass. POM peaks in summer, a period characterized by high freshwater input and the strong stratification, as a result of the intense proliferation of phytoplankton by a large amount of nutrient loading from the tributaries. On the other hand, the high C:P and N:P ratios in summer indicate that P is limited for phytoplankton growth owing to N-enrichment from a high input of freshwater with a high dissolved inorganic N:P ratio.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.808-815
• /
• 2010

This study is to give informations about management Situations and investment returns to someone who will newly cultivate schizandra or expand area of culture. This study used IRR, B/C Ratio and NPV for beneficial analysis. We surveyed fifty one among schizandra cultivation farmhouses in chief producing districts Gangwon Inje, Gyeongbuk Munkyung, Kyungnam Sancheong and Jeonnam Whasoon in Korea from May till September in 2009. So this study surveyed about inputted labors and materials, land price and etc. by working process to calculate producing and operating cost. Fruits of schizandra are sold from 5,000 won to 6,000 won per kg at locals. And IRR(Internal Rate of Returns), B/C Ratio and incomes ratio is calculated by three senarios 5,000 won, 5,500 won and 6,000 won per kg at locals. Discount rate is 3.00%. As the result of this study IRRs are -16.00%, -6.91%, 0.40% one after another and B/C Ratios are 0.81, 0.89, 0.97 one after another. And schizandra cultivation isn't profitable. When price of schizandra fruits is 6,200 won per kg, IRR is 3.00% and B/C Ratio is 1.00. Therefore, if price of schizandra fruits is over 6,200 won per kg, we judge that it is profitable. And income ratio is 23.9% on 6,200 won per kg.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.257-269
• /
• 1995

The TiC-Co/Al reaction-sintered products were prepared by the infiltration of various Co/Al metal mixture into the preform, and their microstructure, phases, and mechanical properties were investigated. With increasing the atomic ratio of Co/Al, tiC grain shape was changed from spherical to platelet particles, and the grain size increased. The crystalline phases found in the liquid matrix formed by the infiltration of Co/Al metal mixture were determined to be Al5Co2 and AlCo by EDS and XRD, and the two crystalline phases were located dominantly between TiC grains, when the Co/Al atomic ratio was lower than an unity. There was a tendency that the density, bending strength and fracture toughness increase with Co/Al atomic ratio until the infiltrated metal was 100% Co. The maximum value was achieved by the composition containing 100% Co infiltrated metal. The Vickers hardness decreased as Co/Al atomic ratio increased.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.415-423
• /
• 1988

Mixtures of carbon and silica (about 0.46${\mu}{\textrm}{m}$) which was synthesized by the hydrolysis of ethyl silicate, the molar ratio of silica/carbon was fixed as 1/10(weight ratio : 1/2), were nitrided in the temperature range 135$0^{\circ}C$~150$0^{\circ}C$. The phse of the product Si3N4 was $\alpha$ phase and the morphology was hexagnoal prism and the nitridation reaction was completed in 5 hrs at 150$0^{\circ}C$ or 7hrs at 145$0^{\circ}C$. The reaction rate above 150$0^{\circ}C$ was diffusion-controlled, following Jander equation. Activation energy Q was derived from the Arrhenius plot and the value was about 101kcal/mol. Axis ratio of Lattice constants(c/a) was 0.726 and unit volume was $\AA$3, the larger the molar ratio of carbon/Alkoxide was, the smaller the particle size of $\alpha$Si3N4 was.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.2
• /
• pp.203-210
• /
• 2010

The signification of calorie/water (C/W) ratio was investigated in the treatment of highly concentrated organic wastes by thermophilic oxic process (TOP). Swine waste was used in this study. When C/W ratio was 1.6, most of swine waste was decomposed and all water was evaporated in the 24-h injection cycle. To improve treatment efficiency of TOP treating swine waste, the effect of shortening the swine waste injection cycle was examined. The shortening of injection cycle was conducted to stimulate the activity of thermophilic bacteria. A high temperature in the reactor was maintained by shortening of the injection cycle. When the swine waste injection cycle was shortened, the C/W ratio was fixed at 1.6. As a result, by shortening the swine waste injection cycle from 24-h to 12 and 6-h, the maximum loading rate of swine waste per day could be improved 1.9 and 3.5 times, respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.136-141
• /
• 1995

The early evaluation on strength of concrete is useful to achieve on quality control and improvement of properties of concrete. Especially, we could say that the confidence of construction is increased by the increase durability and safety building, due to early evaluation. In this study, was proposed to ultra-sonic pulse method as a early evaluation method for strength of concrete with main parameter, sush as W/C ratio and S/A ratio. The experiment results are summarized to follow as : $\circled1$ The ultra-sonic pulse was decreased as the increase of W/C ratio. $\circled2$ The maximum value for the ultra-sonic pulse velocity and compressive strength was presented in the case of 40% S/A ratio and these value was decreased as the change of S/A ratio over 40% $\circled1$ The relationship of the ultra-sonic pulse velocity and compressive strength on 28days according to the change of W/C and S/A ratio is to be: $F_{28} = -209193R^2 + 384417R - 1763441$(W/C Ratio) $F_{28} = 1726R^2 - 774R - 502 (S/A Ratio)

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.194.2-194.2
• /
• 2011

Heating and cooling performance has been analyzed for the water-source heat pump system using raw water from Daechung reservoir. During heating operation from March to May, water temperature is not good condition for a heat source due to the higher atmospheric temperature. Avearged heating load ratio is only 14.3%, and the averaged unit COP and system COP are estimated to be 2.46 and 2.15 respectively. The COP is affected considerably by the water temperature, and the unit COP is increased from 2.16 at $5^{\circ}C$ to 2.95 at $11^{\circ}C$. Cooling performance is analyzed with the measured data from June to August. During cooling operation, raw water has lower temperature by 4. $5^{\circ}C{\sim}4.7^{\circ}C$ than the atmosphere. The load ratio is 39.2%, and the averaged unit COP and system COP are estimated to be 7.25 and 6.13 respectively. The heating COP is affected by the load ratio rather than water temperature. The COP is increased for 20%~40% load ratio, while is decreased for 40%~60% load ratio. It is estimated that the compressor operation combination for 3 (two constant speed and one inverter) compressors is changed for the load ratio.