• 제목/요약/키워드: C ratio)

검색결과 14,662건 처리시간 0.042초

간헐폭기 활성슬러지공정에서 C/N비와 질소제거의 관계 (Relationship Between C/N Ratio and Nitrogen Removal in Intermittently Aerated Activated Sludge System)

  • 서인석;김병군;이상일
    • 환경위생공학
    • /
    • 제13권2호
    • /
    • pp.57-65
    • /
    • 1998
  • In this research, Effect of C/N ratio on nutrient removal in intermittently aerated activated sludge system(IAASS) was investigated with dormitary, building and swine wastewater. Three types (2-stage, 4-stage, modified) of IAASS were operated. Time interval of aeration/nonaeration in IAASS was 1hr/1hr. In treatment of Dormitary wastewater(BOD/T-N ratio : 4.4), Building wastewater (BOD/T-N ratio : 3.14) and swine wastewater(BOD/T-N ratio : 3.84), Nitrogen removal efficiency of 80, 70 and 90.4% was achieved, respectively. Nitrogen removal in IAASS was a great influenced on influent C/N ratio, efficient nitrogen removal was achieved at BOD/T-N ratio over 4. In IAASS operation, $\Delta $BOD mg/L/$\Delta $ nitrogen mg/L ratio was about 4-6. Simultaneous removal of organic, nitrogen and phosphorus in IAASS can achieved. And influent organic was efficiently utilized in denitrification. IAASS could be one of the best alternative process for the retrofit of conventional activated sludge system for the removal of nutrients.

  • PDF

칡넝쿨 및 톱밥을 이용한 C/N비 조절에 따른 음식물찌꺼기의 발효특성에 관한 연구 (A Study on the Fermentation Characteristics of Garbages by the C/N Ratio Control using Kudzu Creeper and Sawdust)

  • 박진식;안철우;문추연
    • 환경위생공학
    • /
    • 제15권3호
    • /
    • pp.23-23
    • /
    • 2000
  • In this study, to determine the optimum fermentation process for the feed production of food wastes and estimate the practical value of fermented feed using kudzu creeper and sawdust as bulking agent. This study considered initial C/N ratio control as the fermentation process variables. The results are summarized as follows. Minimum water contents of byproducts in the fermentation feed production showed 3994(kudzu), 37%( sawdust) at the C/N ratio 25 and 45%(kudzu, sawdust) at the C/N ratio 35. Temperature variations in the fermentation feed production at the C/n ratio 25 indicated 68'C(kudzu), 70'C (sawdust).Optimum condition of consists of fermentation process of water content, C/N ratio and permeability (porous structure of the mixture). For optimum fermentation of gravitationally, dewatered garbage, the proper mixing ratios of kudzu(moisture contents : 17.3%) and sawdust(moisture contents : 13.2%) were 41% and 39%, respectively Major biological reaction in the aerobic fermentation feed production occurred during 12~14hrs

Influence of crown-to-implant ratio on periimplant marginal bone loss in the posterior region: a five-year retrospective study

  • Lee, Kyung-Jin;Kim, Yong-Gun;Park, Jin-Woo;Lee, Jae-Mok;Suh, Jo-Young
    • Journal of Periodontal and Implant Science
    • /
    • 제42권6호
    • /
    • pp.231-236
    • /
    • 2012
  • Purpose: The aim of this study was to evaluate the influence of the crown-to-implant (C/I) ratio on the change in marginal bone level around the implant and to determine the site-related factors influencing the relationship between the C/I ratio and periimplant marginal bone loss. Methods: A total of 259 implants from 175 patients were evaluated at a mean follow-up of five years. Implants were divided into two groups according to their C/I ratios: ${\leq}$ 1, and >1. Site-related factors having an influence on the relationship between C/I ratio and periimplant marginal bone loss were analyzed according to the implant location, implant diameter, implant manufacturer, prosthesis type, and guided bone regeneration (GBR) procedure. Results: It was found that 1) implants with a C/I ratio below 1 exhibited greater periimplant marginal bone loss than implants with a C/I ratio more than 1, 2) site-related factors had an effect on periimplant marginal bone loss, except for the implant system used, 3) the C/I ratio was the factor having more dominant influence on periimplant marginal bone loss, compared with implant diameter, prosthesis type, implant location, and GBR procedure, 4) implants with a C/I ratio below 1 showed greater periimplant marginal bone loss than implants with a C/I ratio greater than 1 in the maxilla, but not in the mandible, 5) and periimplant marginal bone loss was more affected by the implant system than the C/I ratio. Conclusions: Within the limitations of this study, implants with a higher C/I ratio exhibited less marginal bone loss than implants with a lower C/I ratio in the posterior regions. The C/I ratio was a more dominant factor affecting periimplant marginal bone loss in the maxilla than the mandible. Meanwhile, the implant system was a more dominant factor influencing periimplant marginal bone loss than the C/I ratio.

MLE 공정을 이용한 양돈폐수의 질소 제거 특성 (Nitrogen Removal Characteristics of Swine Wastewater when treating by MLE Process)

  • 박성균;박현수;이기공;정윤진
    • 상하수도학회지
    • /
    • 제14권2호
    • /
    • pp.147-156
    • /
    • 2000
  • In this study, the optimal operation parameters of MLE(Modified Ludzack-Ettinger) process treating the liquid supernatant separated from the slurry excreta of swine feedlot was studied as a promising biological treatment process. The nitrogen removal characteristics with different volume ratio between nitrification and denitrification reactor and the operational effect with different nitrogen loading rate, and different C/N($COD_{Cr}/TKN$) ratio were investigated. Based on the laboratory results, pilot MLE plant was operated to examine the effect of ambient temperature for five months including winter. The denitrification reactor which is 20% of total volume was proposed as the most optimal volume fraction for nitrification and denitrification. The optimum ratios of F/M and $F_N/M$ were increased with increase of the C/N ratio. However, optimum F/M ratio was changed more rapidly than $F_N/M$ ratio with increase of the C/N ratio. Therefore, MLE process is desirable to be controlled by F/M ratio in the range of high C/N ratio and by $F_N/M$ ratio in the range of low C/N ratio. Pilot MLE plant showed the higher removal efficiencies of COD and TKN in winter than in summer and was operated most stably at the temperature of $20{\sim}25^{\circ}C$ for mixed liqour.

  • PDF

대한민국 성인에서 알부민뇨와 요산 대 고밀도 지단백 콜레스테롤 비율의 관련성 (Relationship between Albuminuria and Uric Acid to High-Density Lipoprotein Cholesterol Ratio in Korean Adults)

  • 윤현
    • 대한임상검사과학회지
    • /
    • 제55권3호
    • /
    • pp.167-173
    • /
    • 2023
  • 본 연구는 한국 성인에서 요산 대 고밀도 지단백 콜레스테롤(uric acid to high density lipoprotein cholesterol, UA/HDL-C) 비율과 요 중 마이크로알부민 대 크레아티닌 비율(uACR)의 연관성을 평가하기 위해 수행되었다. 2019년 국민건강영양조사 자료를 이용하여 20세 이상 성인 5,845명을 대상으로 연구를 수행하였다. 본 연구에서 몇 가지 중요한 발견이 있었다. 첫째, 관련 변수(연령, 성별, 고혈압, 비만, 제2형 당뇨병 및 만성 신장 질환)를 조정한 후, UA/HDL-C ratio의 사분위수가 증가함에 따라 uACR수준이 증가하였다(P=0.002). 둘째, 관련 변수를 조정한 후, UA/HDL-C ratio의 사분위수 1 (Q1)과 비교하여 알부민뇨(uACR≥30.0 mg/g)의 odd ratio (OR)은 Q2(OR, 1.015; 95% confidence interval [CI], 0.757~1.361)와 Q3 (OR, 1.090; 95% CI, 0.811~1.465)에서는 유의하지 않았다. 그러나 Q4 (OR, 1.416; 95% CI, 1.044~1.921)에서 알부민뇨의 발생률은 Q1에 비하여 유의하게 높았다. 한국 성인에서 UA/HDL-C ratio는 알부민뇨와 양의 상관관계가 있었고, UA/HDL-C ratio는 대한민국 성인에서 알부민뇨를 평가하는 유용한 지표로 사용될 수 있을 것으로 사료된다.

D.C Magnetron Reactive Sputtering 법으로 증착한 $PbTiO_3$ 박막의 열처리에 따른 c-축 배향성의 변화 (Effect of Annealing on c-axis Orientation of $PbTiO_3$ Thin Films by D.C magnetron Reactive Sputtering)

  • 이승현;권순용;최한메;최시경
    • 한국세라믹학회지
    • /
    • 제33권7호
    • /
    • pp.802-808
    • /
    • 1996
  • PbTiO3 thin films were fabricated onto MgO(100) single crystal substrate by reactive D. C magnetron sput-tering of Pb and Ti metal in an oxygen and argon gas mixture. The annealing of the thin films resulted in the decrease of both the c-axis orientation ratio and the lattice parameter. It is well known that the c-axis lattice parameter of thin film is dependent on the Pb/(Pb+Ti)ratio and the residual stress in the film The PbTiO3 thin films with a Pb/(Pb+T) ratio ranging from 0.45 to 0.57 were fabricated and annealed. The structure of the film the c-axis orientation ratio and the lattice parameter were not dependent on the Pb/(Pb+Ti) ratio before and after annealing. These experimental results proved that the decrease of the c-axis lattice parameter under the annealing conditions was due to the relaxation of the intrinsic stress in the film. This relaxation of the intrinsic stress caused the decrease of the c-axis orientation ratio and this phenomenon can be explained by c-axis growth lattice model.

  • PDF

전기 저항법을 이용한 콘크리트 조기 강도 판정에 관한 연구 (The Study on Earlier Evaluation of Concrete Strength Using Electric Resistance Method)

  • 김화중;이도현;윤상천;박정민;최신호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1995년도 봄 학술발표회 논문집
    • /
    • pp.130-135
    • /
    • 1995
  • We can consider that the study on early evaluation of strength of concrete is useful to raise safety of building and utility of quality control of concrete is useful to raise safety of building and utility of quality control of concrete. In this paper, was proposed to method early to predict strength of concrete with key parameters, such as Water/Cement(W/C) ratio and Sand / Aggregate(S/A) ratio. Through a series of experiment, the obtained results are summarized as follow. $\circled1$ The ratio of resistance was decteased as the increase of W/C ratio. $\circled2$ The maximum value for the ratio of resistance and compressive strength was presented in the case of 40% S/A ratio. $\circled3$ The relationship. of the ratio of resistance and compressive strength on 28days according to the change of W/C and S/A ratio is to be: $F_{28}=-0.00104R^2 + 2.263R - 935.5$ (W/C Ratio) $F_{28} = 0.007R^2 - 10.693R - 4269.1$ (S/A Ratio)

  • PDF

퇴비화를 이용한 하수슬러지 처리에 있어서 적정 수분함량과 C/N비에 관한 연구 (A Study on Optimum Moisture Content and C/N ratio of Sewage Sludge Treatment Using Composting)

  • 손현석;양원호;정문식
    • 한국환경보건학회지
    • /
    • 제23권2호
    • /
    • pp.44-56
    • /
    • 1997
  • When sewage sludge is treated by cornposting, higher moisture content and lower C/N ratio on sewage sludge is problems. This paper project to alesolve two problems. The almost trends in run 3 of MC 70% are similar to these in run 1 and 4 of MC 65%. A retention time of the highest temperature (>50$\circ$C) and increase rate of temperature in run 3 are an affinity to these in run 4. Particularly, decrease rate of temperature in run 3 is slower than others and this data shows the more activity of thermal microbial in run 3 than that in others. C/N ratio trends in run 3 shows slow reaction in initial stage but, after 9 days, is similar to that in run 1 and 4. Carbon trends in each run are a similarity to C/N ratio trends. Temperature, MC, carbon and C/N ratio trends in run 5, whose C/N ratio is 15, show less microbial activity than that in run 6, whose C/N ratio is 20. But temperature increase of the beginning stage and pH of the final stage in run 5 are greater than that in run 6. Final MC and carbon content in run 5 and 6 have a similar values. That is, final MC in run 5 and 6 is 49.39% and 48.97% and final carbon content in each run is 25.15% and 22.20%. Expecially, a temperature increase and C/N ratio decrease rate of the beginning stage in run 5 are greater than these in run 6. This shows the shorter lag time in run 5 than lag time in run 6.

  • PDF

심혈관질환 예측을 위한 저밀도 대 고밀도 지단백 콜레스테롤 비(LDL : HDL-cholesterol ratio)의 적정기준에 관한 연구 (Assessment of the Optimum LDL : HDL-cholesterol(LDL : HDL-C) Ratio for Predicting CHD)

  • 염순교
    • 성인간호학회지
    • /
    • 제20권6호
    • /
    • pp.917-931
    • /
    • 2008
  • Purpose: This study was aimed to determine the optimum low-density lipoprotein : high-density lipoprotein-cholesterol (LDL : HDL-C) ratio for predicting coronary heart disease(CHD) in Korean people. Methods: It was analyzed this data of 5,431 adults who had undergone health examinations in a hospital in Gyeonggi-do between January 2006 and December 2007. The covariation of the coronary risk factors such as age, HbA1C, systolic blood pressure(SBP), and waist-to-stature ratio(WSR) were analyzed by using logistic regression analysis. Results: The LDL : HDL-C ratio in the male and female groups was mostly distributed between 1.5 and 4.0. The LDL : HDL-C ratio was the most significant cholesterol-related parameter influencing CHD (male: B = .306, p = .054, female : B = .940, p = .010), followed by LDL-C and total cholesterol. It was observed a sharp increase in the odds ratios for LDL : HDL-C ratios of 2.25 - 2.50(male) and 2.00 - 2.25(female). A significant difference was observed in both male(2.25 : $x^2$ = 2.494, p = .072) and female(2.00 : $x^2$ = 413.742, p = .000) groups. Conclusion: The risk level of CHD was set to 2.25 for males and 2.00 for females. Therefore, the optimum LDL : HDL-C ratio for Koreans should be far lower than that for the people in western countries.

  • PDF

Effect of C/Ti Atomic Ratio of TiCx Raw Powder on the Properties of Ti-Mo-W-TiC Sintered Hard Alloy

  • Nakahara, Kenji;Sakaguchi, Shigeya
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.109-110
    • /
    • 2006
  • We have studied the effect of C/Ti atomic ratio of TiCx (x=0.5, 0.75 and 1.0) raw powder on the properties of the Ti-Mo-WTiC sintered hard alloy. The decrease of C/Ti atomic ratio accelerated the densification in the sintering process. The hardness was remarkably improved up to 1350HV with decreasing the C/Ti atomic ratio because of increase of TiCx phase volume content and its fine dispersion. From the results of electro-chemical tests in acid and 3% NaCl solutions, it was obvious that every alloy had excellent corrosion resistance, which meant about 200 times better than that of WC-Co cemented carbide.

  • PDF