• 환경위생공학
• /
• 제7권1호
• /
• pp.1-16
• /
• 1992

Corrosion of pipes Is one of the most serious problems in the maintenance of water worlds. Corrosion is promoted not only by physical factors such as temperature, but also by electrochemical factors including concentration of soluble metal ions, chlorine ion, pH, DO and microorganisms. Corrosion products also affect corrosion rate. In this research, study results are summarized as follows ; 1) Corrosion test was performed for 4 weeks at $70^{\circ}C$, pH 7.0 with specimens of 4 types of metal materials used as service pipes. Corrosion rate and S.E.M were analyzed. The results were showed that corrosion 1.ate of carbon steel pipe was 4.10~5.22 $mg/\textrm{cm}^2$ . week, galvanized steel pipe 0.98~1.34$mg/\textrm{cm}^2$. week, Copper pipe 0.02~0.04$mg/\textrm{cm}^2$. week, stainless steel pipe 0.05~ 0.10$mg/\textrm{cm}^2$ . week. 2) When corrosion rate was tested for tile types of pipes at pH 7 and both $25^{\circ}C$ and $75^{\circ}C$, avaerage corrosion rate for 6 weeks at $25^{\circ}C$ Ivas 2.26$mg/\textrm{cm}^2$ . week in carbon steel pipe, 1.99$mg/\textrm{cm}^2$. week in galvanized steel pipe, 0.26 $mg/\textrm{cm}^2$. week in stainless steel pipe. At $87^{\circ}C$, average corrosion rate for 4 weeks u.3s 4.56 $mg/\textrm{cm}^2$. week in carbon steel pipe,

• 한국연소학회지
• /
• 제5권1호
• /
• pp.7-18
• /
• 2000

Numerical simulations of counterflow non-premixed $CH_4/C_2HCl_3/Air$ flames added 8%(by volume) C2HCl3 on the fuel side are conducted at atmospheric pressure using a detailed chemical reaction mechanism in order to understand the effect of strain rates. A detailed sensitivity analysis is also performed in order to assess the relative influence of each reaction on the flame established at a strain rate of 200s-1. The structure of flames (i.e., temperature, velocity, and concentration of species) established at both a strain rate of 150s-1 and 300s-1 are investigated. As the strain rate increases, the "flame zone" is restricted to a narrower range and the position of maximum temperature is shifted to the fuel side. The concentrations of major species, H2O, CO, H2, HCl, Cl2, and Cl are decreased with increased strain rate. The reaction involving chlorine, CH4 + Cl $\rightarrow$ CH3 + HCl, instead of the reaction, CH4 + H $\rightarrow$ CH3 + H2 influences the consumption of methane. C2HCl3 + OH $\rightarrow$ CHCl2 + CHOCl and HCl + OH $\rightarrow$ H2O + Cl, are major reactions, through which OH radicals are consumed.

• 한국식품과학회지
• /
• 제24권4호
• /
• pp.301-305
• /
• 1992

원심식 박막증발기를 이용해 마늘 착즙을 농축한 경우 가열 매체 및 증발온도가 농축비, 총괄열전달계수, 증발속도 등에 대해 미치는 영향에 대하여 조사하였다. 마늘착즙의 급액속도와 증발온도가 일정할 때 가열증기의 온도가 높을수록 농축비, 증발속도, 및 총괄열전달계수는 증가하였으나, 가열증기의 온도가 $110^{\circ}C$ 이상이 되면 이들 값의 증가가 현저하게 둔화되었다. 증기온도 $100^{\circ}C$ 이하에서는 증발온도가 증가함에 따라 농축비, 증발속도, 총괄열전달계수는 감소하였다. 그러나 그 이상의 온도에서 어느 일정 증발온도까지는 이들 값이 증가하다가 다시 감소하는 경향을 나타내었다. 급액속도가 일정할 때 증기의 온도와 증발온도와의 차이가 $70^{\circ}C$가 될 때까지는 농축비, 증발속도 및 총괄열전달계수는 모두 증가하였다. 그러나 온도 차이가 $70^{\circ}C$ 이상이 되면 이들 값의 증가가 둔화되거나 감소하였다.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.51-56
• /
• 1999

Fatigue crack propagation rates and characteristics of the SA516-70 steel which is used for the low temperature pressure vessels, were studied in the room temperature of $10^{\circ}C$ and low temperature ranges of $-10^{\circ}C,\;-30^{\circ}C,\;-50^{\circ}C,\;and\;-70^{\circ}C$ with stress ratio of R=0.05. The obtained experimental results are as follows; 1) In the logarithmic relationship between the fatigue crack propagation rate(da/dN) and stress intensity factor K, the linear relationship was obtained up to da/dN > $8{\times}10^3$ mm/cycle in the same of room temperature, but in low temperature case, the relationship was extended to the range of low crack propagation rate. 2) The lower limit stress intensity factor of SA516-70 ${\Delta}K_{th}\;was\;23MPa\sqrt{m}$ and in the case of low temperature $-50^{\circ}C\;and\;-70^{\circ}C$, the crack propagation rate da/dN which showed a linear relation, reached rapidly to the ${\Delta}K_{th}$. As the results, the crack propagation rates of $-50^{\circ}C\;and\;-70^{\circ}C$ were lower than that of room temperature and according to the testing temperature the rates were decreased rapidly to the ${\Delta}K_{th}$. 3) On the relationship between the stress intensity factor ${\Delta}K$ and the track propagation cycle, the stress intensity factors of low cycle region was rapidly increased at low temperature, but ${\Delta}K$ was increased rapidly at room temperature of high cycle. 4) On the relationship between the fatigue crack propagation rate and cycle, the fatigue crack propagation rate showed higher gradient in the room temperature than the low temperature due to the increment in ductility at low temperature.

• 수산경영론집
• /
• 제42권3호
• /
• pp.79-93
• /
• 2011

Water temperature of Oliver flounder farm affects Oliver flounder growth and mortality rate. In laboratory experimental tanks, optimal water temperature was $22.5^{\circ}C$($21{\sim}24^{\circ}C$) and cultivatable water temperature was $12{\sim}28^{\circ}C$. The purpose of this study is to identify applicable and useful water temperature of Oliver flounder farm in case of actual farming. The data applied in the analysis was collected from Jeju island. In the study, various analytical methods including productivity analysis, regression analysis, statistical analysis were conducted for 13 Oliver flounder culture farms. The result of analysis can be summarized as follows : First, growth rate on the Oliver flounder culture farms was related to mean of water temperature, variation of water temperature and low water temperature. Second, survival rate on the Oliver flounder culture farms was related to mean of water temperature. In case of including Oliver flounder stocking density, defined as the surface area of Oliver flounder per $m^2$ of water surface area, survival rate strongly related to mean of water temperature, variation of water temperature, cultivating capability and stocking density. Third, production weight per $m^2$ of water surface area was strongly related to mean of water temperature, low water temperature and cultivating capability. Growth rate and survival rate was analyzed into mediate variable character.

• 한국자원식물학회지
• /
• 제11권2호
• /
• pp.124-130
• /
• 1998

It failed occasionally to take a reasonable emergence rate since tobacco (Nicotiana tabacum L.) seeds were planted on late Jan. showing lowest temperature. This experiment was done to measure the effect of GA3 (concentration ; period) , light quality (red ; white ; dark) during or after its treatment, daily irradiation hours( 0 ; 8 ; 12 ;16) and germination termperature (20 or 10 $^{\circ}C$ ocnstant ; 20/1$0^{\circ}C$ alternating) on the germination rate. Red and white light given during grmination showed no differences between the other daily irradiation hours except that 8 hours red light delayed germination although their 12 hours irradiation had the gratest rate. The rate was increased with increased concentration to GA3 0.01 mM or increased imbibition period to 3 days although the rate of cv. NC 82 was less than that of cv. Burley 21 in the case of dark imbibition of GA3 but daily 12 hours irradiation during germination. Light quality forced during GA3 imbibition eliminated such effect of GA3 shown in the darkness so that only light quality pretreatment and termperature during germinition were affected on the rate. The germination rate of thecultivars was decreased in the order of red, white light, darkness meaning that it was highly influenced by the light quality during GA3 treatment. Regardless of GA3 or light quality treatment,on the other hand, the rate was greater in 20 $^{\circ}C$ constat than 1$0^{\circ}C$ constant and 20/1$0^{\circ}C$ alternating germination temperature having similar germinative patterns.

• Journal of Ecology and Environment
• /
• 제31권4호
• /
• pp.261-267
• /
• 2008

Growth and photosynthetic responses of one $C_3$ and two $C_4$ plants in the family Chenopodiaceae in three $CO_2$ concentration $([CO_2])$ conditions-low (about $243{\mu}mol\;mol^{-1}$, LC), present (about 378, PC), and high (about 465, HC)-were investigated in open top chambers. The relative growth rate (RGR) and net assimilation rate in the $C_3$ plant, Chenopodium album, increased with increasing $[CO_2]$, though the RGR was not enhanced significantly in the HC condition. The leaf area ratio and leaf weight ratio of the $C_3$ plant drastically decreased with increasing $[CO_2]$, suggesting that the $C_3$ plant invests more biomass to leaves in lower $[CO_2]$ conditions. The two $C_4$ plants, Atriplex glauca and A. lentiformis, showed relatively small changes in those growth parameters. These photosynthetic-pathway-dependent responses suggest that growth patterns of $C_3$ and $C_4$ plants have been altered by past increases in atmospheric $[CO_2]$ but that there will be relatively little further alteration in the future high-$CO_2$ world.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.721-725
• /
• 1998

본 연구에서는 Boron과 Carbon black이 소결조재로 첨가된 탄화규소 분말을 $1950^{\circ}C$에서 상압소결 방법으로 시편을 제조하고 꺽임강도, 파괴인성, 비마모량을 측정하고 파단면 및 마찰마모면의 미세구조를 SEM으로 관찰하여 마찰마모특성과 미세구조와의 관계를 규명하였다. 또한 마모상대재료로서 SiC pin과 $Al_{2}O_{3}$ pin을 사용하였을때 마찰마모특성과 미세구조와의 관계도 비교 검토하였으며 다음과 같은 결론을 얻었다. 1. SiC pin을 사용한 경우 소결시편의 비마모량은 $Al_{2}O_{3}$ pin을 사용한 경우보다 많았으나, 가압하중이 증가하면 $Al_{2}O_{3}$ pin을 사용한 경우가 SiC pin을 사용한 경우보다 비마모량의 증가율이 6.5배로 되었다. 2. Pin의 비마모량은 SiC pin의 경우가 $Al_{2}O_{3}$의 경우보다 많았으나 가압하중이 증가하면 $Al_{2}O_{3}$ pin의 경우가 SiC pin의 경우보다 비마모향의 증가율이 약4배로 되었다. 3. 마모상대재료의 마찰계수가 작은 경우에는 마모면의 미세구조가 평활하면서 crack이 나타나지 않았으나, 마찰계수가 큰 경우에는 마모면이 평활치 못하고 crack의 전파현상이 크게 나타났다. 4. 사용된 Pin의 마찰계수가 큰 경우에는 고상소결한 SiC 시편도 액상소결한 시편과 마찰마모 특성이 유사하였다.

• 대한소아치과학회지
• /
• 제8권1호
• /
• pp.89-102
• /
• 1981

1147 preschool children aged from 3 to 6 living in some farm villages in Kyungki-do were surveyed on dmf and distribution of dental caries in primary dentition. The results were as follows: 1. dmf rate ... 92.76 % boy ... 94.52 % girl ... 90.5.5 % 2. dmf t rate ... 37.07 % dmf t index ... 7.09 3. dmf s rate ... 13.74 % dmf s index ... 13.14 % 4. df t index ... 6.94 5. Each percentage of d, m & f per dmf teeth d rate ... 89.96 % m rate ... 7.24 % f rate ... 2.67 % 6. Most frequent site of dental caries in each tooth $\underline{A}$ mesial $\overline{A}$ distal $\underline{B}$ mesial $\overline{B}$ distal $\underline{C}$ distal $\overline{C}$ distal $\underline{D}$ disto-occlusal $\overline{D}$ disto-occlusal $\underline{E}$ linguo-occlusal $\overline{E}$ occlusal 7. Order of caries susceptibility $\overline{E}$ $\underline{E}$ $\overline{D}$ $\underline{D}$ $\underline{A}$ $\underline{B}$ $\overline{C}$ $\underline{C}$ $\overline{B}$ $\overline{A}$ 8. All the values in caries criteria showed a marked increae from those of 1968.

• 한국작물학회지
• /
• 제45권2호
• /
• pp.108-111
• /
• 2000

Osmoconditioning and hardening effects for the seed germination of normal and naturally aged rice seeds were studied through analyzing the total sugars and $\alpha$-amylase activity. The normal seeds which used to have high germination rate accelerated germination with the osmoconditioning at the suboptimal temperature of 17$^{\circ}C$. On the other hand, the aged seeds did not affect germination rate at $25^{\circ}C$, while increased germination rate and accelerated germination a little at 17$^{\circ}C$, Hardening of aged seeds increased germination rate by 10-15% compared with control seeds at both 17 and $25^{\circ}C$ and accelerated germination. Total sugar content and $\alpha$-amylase activity of normal seeds were higher than did aged seeds. The aged seeds with treatment of osmoconditioning and hardening increased total sugar content and $\alpha$--amylase activity, but hardening was more effective than osmoconditioning. The $\alpha$--amylase activity was positively correlated with the total sugar content and germination rate.