• International Journal of Industrial Entomology and Biomaterials
• /
• v.16 no.2
• /
• pp.101-107
• /
• 2008

To improve mating rate of the bumblebee, Bombus terrestris, temperature, photoperiod and illumination during mating periods favorable for B. terrestris were investigated. The mating rate of queen mated at $19^{\circ}C$ was 92.1%, which was 2.1-5.9% higher than that of $22^{\circ}C$ and $25^{\circ}C$. $19^{\circ}C$ was more effective than at $22^{\circ}C$ and $25^{\circ}C$ in death rate during mating periods. The survival rate after hibernation of queen mated at $19^{\circ}C$ was 3.0-17.7% higher than that of $22^{\circ}C$ and $25^{\circ}C$. At the photoperiod regimes during mating periods, queen mated at 14 L was more effective than 12 L and 16 L in death rate during mating, survival rate after hibernation, and egg-characteristics. In case of illumination during mating periods, intensity of over 1000 lux was suitable for mating B. terrestris queen in colony development. Therefore, we supposed that mating temperature favorable for B. terrestris was $19^{\circ}C$ and photoperiod for mating was 14 L, and illumination was over 1000 lux.

• Journal of the Korean Society of Safety
• /
• v.9 no.4
• /
• pp.29-41
• /
• 1994

High temperature tensiles tests, steady state creep tests, internal stress tests and creep rupture tests using Al 7075 alloy were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$) in order to investigate the creep behavior and predict creep rupture life From the apparent activation energy Qc and the applied stress exponent n measured, at the temperature range of 9$0^{\circ}C$~l2$0^{\circ}C$, the creep deformation seemed to be controlled by cross slip. On the other hand at the temperature of 20$0^{\circ}C$~23$0^{\circ}C$ the creep deformation seemed to be controlled by dislocation climb but at 47$0^{\circ}C$~50$0^{\circ}C$, by diffusion creep. And the rupture life(t$_{f}$) might be represented by anthermal process attributed to the difference of the applied stress dependence of Internal stress and the ratio of the Internal stress to the applied stress, the thermal activated process attributied to the temperature dependence of the internal stress. Also the ratio between stress dependence of primary creep rate and that of minimum creep rate was measured 0.46, the minimum creep rate is expected to be appromately obtained from master creep curve including the relationship primary creep rate and minumum creep rate. Finally the relationship new rupture parameter and logarithmic stress was represented with including the ratio between the dependence of primary creep rate and that of minimum creep rate, using the new rupture parameter the rupture life predition is exactly expected.d.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.589-598
• /
• 1995

Filtering rates of Crassostrea gigas were experimentally investigated with reference to effects of water temperature and size. Absorptiometric determinations of filtering rates with oysters being fed diatom Chaetoceros calcirtans were carried out in a closed system. Optical density of 675nm in path length 100mm cell used as the indication of food particles absorption was appeared directly In proportion with the concentration of diatom pigment $chlorophyll-\alpha$. In the closed system where $C_0$ is $OD_{675}$ at initial time 0, $C_t$, at time t, and Z is the decreasing coefficient of OD as meaning of instantaneous removal speed, then $C_t=C_0{\cdot} e^{-2t}$, $Z=In(C_t/C_0)/t$. On the assumption that the filtering rate is constant, then removal rate per unit time (d) is $d=-e^{-z}$. If t is used to time unit of hour (hr), the filtering rate (FR) in I/hr is given by $FR=V{\cdot}d=V(1-e^{-z})$, where V is the water volume (I) of the experimental vessel. Filtering rate increased as exponential function with increasing temperature while not over critical limit. The critical temperature for filtering rate was assumed to be between $28^{\circ}C$ and $29^{\circ}C$. And the weight exponent for filtering rate is 0.223. The model formula derived from the results as FR, $Ihr^{-1}$ = $Exp(0.208{\cdot}T-4.324){\cdot} (DW)^{0.223}$ (T<29 $^{\circ}C)$ where T is water temperature $(^{\circ}C

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.5
• /
• pp.270-279
• /
• 2006

The effects of eight types of spheroidizing annealing conditions including annealing temperature, annealing time, cooling rate, and furnace atmosphere on the microstructure and hardeness were determined in SCM440 steel which has been widely used for automotive parts. The well-spheroidized structure and minimum hardness were obtained when the steel was heat-treated at $770^{\circ}C$ for 6 hours, cooled to $720^{\circ}C$ at a cooling rate of $24^{\circ}C/h$, and then kept for 7 hours at the $720^{\circ}C$ followed by air cooling. In order to increase the productivity and to save the manufacturing cost, it is desirable to apply a faster cooling rate to the spheroidizing annealing. It was found that a cooling rate of $100^{\circ}C/hr$ was the fastest cooling rate applicable to the SCM440 steel among the four cooling rates used in this study. The microstructure consisted of ferrite and very fine spheroidized cementite when the steel was annealed for 13 hours at $720^{\circ}C$ below $A_{C1}$ temperature. This was caused by the short annealing time and the retarding effect of Cr and Mo on both the dissolution of pearlite to cementite and coarsening of spheroidized cementite. The steel heat treated in air showed the decarburized layer of about $125{\mu}m$ in thickness at the surface.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1329-1336
• /
• 1998

A twt -step carbothermal reduction scheme has been employed for the synthesis of SiC whiskers in an Ar or a H2 atmosphere via vapor-solid two-stage and vapor-liquid-solid growth mechanism respectively. It has been shown that the whisker growth proceed through the following reaction mechanism in an Ar at-mosphere : SiO2(S)+C(s)-SiO(v)+CO(v) SiO(v)3CO(v)=SiC(s)whisker+2CO2(v) 2C(s)+2CO2(v)=4CO(v) the third reaction appears to be the rate-controlling reaction since the overall reaction rates are dominated by the carbon which is participated in this reaction. The whisker growth proceeded through the following reaction mechaism in a H2 atmosphere : SiO2(s)+C(s)=SiO(v)+CO(v) 2C(s)+4H2(v)=2CH4(v) SiO(v)+2CH4(v)=SiC(s)whisker+CO(v)+4H2(v) The first reaction appears to be the rate-controlling reaction since the overall reaction rates are enhanced byincreasing the SiO vapor generation rate.

• The Korean Journal of Zoology
• /
• v.29 no.3
• /
• pp.201-207
• /
• 1986

The authors attempted to investigate the oxygen consumption rate of sexuals in the water-striders, Gerris paludum insuralis, at four temperature groups of 25, 30, 35 and $40^\\circ C$ in a series of studies on respiration of a heminetabolous insects. THe results are summarised as follows: (1) At $30^\\circ C$, the change of oxygen consumption rate according to the lapse of time was small in comparison with the other three temperature groups which shows a cyclic decreasing pattern. The rate during initial and final 5 minutes was much alike. Thereupon, the optimum temperature was regarded as $30^\\circ C$. (2) The oxygen consumption rate of male was higher than that of female. (3) The oxygen consumption rates at 25, 30, 35 and $40^\\circ C$ were 0.42, 0.49, 0.79 and 1.11 $\\mu$l/mg/h respectively. That is, the rate was increased as the temperature was increased. (4) The $Q_10$ of male showed a high value in the lower temperature interval ($25^\\circ C \\sim 35^\\circ C$), but the female showed a high value in the higher temperature interval ($30^\\circ C \\sim 40^\\circ C$). The mean $Q_10$ was 2.12. (5) The respiratory rate was decreased as the body weight was increased in the above fresh weight of 10mg and dry weight 5 mg. (6) The upper temperature threshold for respiration was $48.31^\\circ C$ and the lower temperature threshold was $17.68^\\circ C$. (7) The ceasing time of breathing at the other three temperature groups except $30^\\circ C$ was infered to be about 110 minutes after the start of experiment.

• Nuclear Engineering and Technology
• /
• v.8 no.4
• /
• pp.203-207
• /
• 1976

Strain rate dependence of the flow stress of cold-worked and annealed Zircaloy-4 was studied by stress relaxation test in temperature range of 20$0^{\circ}C$ to 45$0^{\circ}C$. The In $\sigma$-ln i curves for various temperatures were straight in the eirange of 10$^{-5}$ to 10$^{-3}$ sec$^{-1}$ . From the slope of a curve strain rate sensitivity m was obtained. The m in cold-worked Zircaloy-4 had a minimum value at 30$0^{\circ}C$, while m in annealed Zircaloy-4 had two minimum values, one at 30$0^{\circ}C$ and the other at 45$0^{\circ}C$. It was found that the temperatures of the minimum m are consistent with the temperatures of strain ageing peaks. The minimum m at 30$0^{\circ}C$ is considered to be due to strain ageing owing to the pinning of glide dislocations by oxygen atoms, while the minimum m at 45$0^{\circ}C$ for annealed specimen is attributed to iron atoms.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.2
• /
• pp.261-270
• /
• 1986

A total of 339 urethral, vaginal swab and eye discharge materials from the out-patients in the hospitals of Seoul area was microbiologically collected for the detection of Chlamydia trachomatis infection during May through August, 1985. McCoy cell culture system (MCC) and enzyme-likned immunosorbent assay (EIA) methods were employed in this study as the tools for the detection of C. trachomatis, and the detectabilities of two methods were compared. The results obtained in this study are summarized as follows: 1. The positive rate of C. trachomatis in 339 swab specimens was 18.6%, and the rate in females (20.1%) was much higher than that in males (7.1%). 2. The positive rate of C. trachomatis infection the prostitutes was the highest (24.2%), and the rate in the eye discharge specimens obtained from the new barns was 12.8%. 3. The positive rates of C. trachmoatis infection detected in the specimens from the patients with vaginitis and leucorrhea, with infertility, with cystitis and with nongonococcal urethritis were 17.2%, 21.9%. 18.0% and 7.1%, respectively. 4. The positive rate of C. trachomatis infection in 20-25 age group was 30.5%. This rate was the highest among the other age groups. 5. The positive rate of C. trachomatis infection in the randomly screened 89 swab specimens by EIA (30.3%) was much higher than the rate detected by MCC (18.6%). 6. The positive rate of C. trachomatis infection in females detected by EIA was also much higher than in males, and the 20-25 age group showed the highest positive rate as compared to the other age groups. 7. Sensitivity and specificity of EIA for the detection on C. trachomatis were 100% and 88.6%, respectively, in case that MCC was regarded as perfect method. In summarizing the above results, it is known that considerable cases with genital diseases and with eye discharges were associated with C. trachomatis, and that EIA method is recommendable for the detection of C. trachomatis especially in the specimens swabed from the genital tracts.

• Korean Journal of Food Science and Technology
• /
• v.19 no.5
• /
• pp.451-452
• /
• 1987

The effect of cook temperatures, 100-$120^{\circ}C$, on firming rate of cooked rice stored at $4^{\circ}C$ for 72 hours was studied. The cook temperatures had a definite effect in retarding the firming rate of cooked rice. The time constants, reciprocal of firming rate constants, of cooked rice cooked at $110^{\circ}C$ and $120^{\circ}C$ were 1.2 and 1.5 times greater, respectively, than that at $100^{\circ}C$. The total material available for crystallization and the Portion of material that durings storage were decreased as the cook temperature increased.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1336-1336
• /
• 1998

A twt -step carbothermal reduction scheme has been employed for the synthesis of SiC whiskers in an Ar or a H2 atmosphere via vapor-solid two-stage and vapor-liquid-solid growth mechanism respectively. It has been shown that the whisker growth proceed through the following reaction mechanism in an Ar at-mosphere : SiO2(S)+C(s)-SiO(v)+CO(v) SiO(v)3CO(v)=SiC(s)whisker+2CO2(v) 2C(s)+2CO2(v)=4CO(v) the third reaction appears to be the rate-controlling reaction since the overall reaction rates are dominated by the carbon which is participated in this reaction. The whisker growth proceeded through the following reaction mechaism in a H2 atmosphere : SiO2(s)+C(s)=SiO(v)+CO(v) 2C(s)+4H2(v)=2CH4(v) SiO(v)+2CH4(v)=SiC(s)whisker+CO(v)+4H2(v) The first reaction appears to be the rate-controlling reaction since the overall reaction rates are enhanced byincreasing the SiO vapor generation rate.