• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1619-1637
• /
• 2000

A review was undertaken to obtain information on the range of beak-trimming methods available or under development. Beak-trimming of commercial layer replacement pullets is a common yet critical management tool that can affect the performance for the life of the flock. The most obvious advantage of beak-trimming is a reduction in cannibalism although the extent of the reduction in cannibalism depends on the strain, season, and type of housing, flock health and other factors. Beak-trimming also improves feed conversion by reducing food wastage. A further advantage of beak-trimming is a reduction in the chronic stress associated with dominance interactions in the flock. Beak-trimming of birds at 7-10 days is favoured by Industry but research over last 10 years has shown that beak-trimming at day-old causes the least stress on birds and efforts are needed to encourage Industry to adopt the practice of beak-trimming birds at day-old. Proper beak-trimming can result in greatly improved layer performance but improper beak-trimming can ruin an other wise good flock of hens. Re-trimming is practiced in most flocks, although there are some flocks that only need one trimming. Given the continuing welfare scrutiny of using a hot blade to cut the beak, attempts have been made to develop more welfare friendly methods of beak-trimming. Despite the developments in design of hot blade beak-trimmers the process has remained largely unchanged. That is, a red-hot blade cuts and cauterises the beak. The variables in the process are blade temperature, cauterisation time, operator ability, severity of trimming, age of trimming, strain of bird and beak length. This method of beak-trimming is still overwhelmingly favoured in Industry and there appears to be no other alternative procedures that are more effective. Sharp secateurs have been used trim the upper beak of both layers and turkeys. Bleeding from the upper mandible ceases shortly after the operation, and despite the regrowth of the beak a reduction of cannibalism has been reported. Very few differences have been noted between behaviour and production of the hot blade and cold blade cut chickens. This method has not been used on a large scale in Industry. There are anecdotal reports of cannibalism outbreaks in birds with regrown beaks. A robotic beak-trimming machine was developed in France, which permitted simultaneous, automated beak-trimming and vaccination of day-old chicks of up to 4,500 chickens per hour. Use of the machine was not successful because if the chicks were not loaded correctly they could drop off the line, receive excessive beak-trimming or very light trimming. Robotic beak-trimming was not effective if there was a variation in the weight or size of chickens. Capsaicin can cause degeneration of sensory nerves in mammals and decreases the rate of beak regrowth by its action on the sensory nerves. Capsaicin is a cheap, non-toxic substance that can be readily applied at the time of less severe beak-trimming. It suffers the disadvantage of causing an extreme burning sensation in operators who come in contact with the substance during its application to the bird. Methods of applying the substance to minimise the risk to operators of coming in contact with capsaicin need to be explored. A method was reported which cuts the beaks with a laser beam in day-old chickens. No details were provided on the type of laser used, or the severity of beak-trimming, but by 16 weeks the beaks of laser trimmed birds resembled the untrimmed beaks, but without the bill tip. Feather pecking and cannibalism during the laying period were highest among the laser trimmed hens. Currently laser machines are available that are transportable and research to investigate the effectiveness of beak-trimming using ablasive and coagulative lasers used in human medicine should be explored. Liquid nitrogen was used to declaw emu toes but was not effective. There was regrowth of the claws and the time and cost involved in the procedure limit the potential of using this process to beak-trim birds.

• Journal of the Korean Arthroscopy Society
• /
• v.3 no.2
• /
• pp.115-120
• /
• 1999

Purpose : After the total or partial meniscectomy of the lateral discoid meniscus, many patients complain the residual pain or the recurrent symptoms of the meniscus, and some of them need reoperation. We analyzed the causes of the reoperation after initial meniscectomy. Material & Method : Two hundred seventy three patients with the symptomatic lateral discoid meniscus were treated by arthroscopic meniscectomy between October, 1989 and September, 1998. Of the 273 patients, 69 patients were treated by total meniscectomy and 204 patients were treated by partial meniscectomy. The male to female sex ratio was 1:1.04, and the average of the age was 23.1 years old(from 4 to 59 years old). The reoperation was done in 8 patients, of which 1 was the case of total meniscectomy at the initial operation, and the rest 7 were the case of partial meniscectomy. Results : Of the 8 reoperations, 3 patients recurred the meniscal symptoms within the 3rd week after the initial operation, and 5 patients recurred beyond the 3rd week after the initial operation. Among the 3 patients of carly recurrence, 2 patients showed inadequate sizes of the remnant meniscus, and 1 patient showed posterolateral instability of the remained meniscus. Among the 5 patients of late recurrence, 3 patients showed rerupture of the meniscus, and 2 patients showed associated pathology of degenerative arthritis following osteochondritis dissecans. Conclusions : The reoperation rate after initial meniscectomy of the lateral discoid meniscus was higher in partial meniscectomy than total meniscectomy. During the operation of the lateral discoid meniscus, we must determine the adequate resectional margin, confirm the remnant meniscus by probing, and look for the associated pathologies.

• Clinical and Experimental Pediatrics
• /
• v.45 no.3
• /
• pp.311-319
• /
• 2002

Purpose : We have performed this study to obtain reference data for the distribution of chromosomal aberrations in Korea. Methods : We analyzed 1,180 chromosomal study cases from Kwang ju Christian Hospital during the past 25 years. 756 cases suspected of characteristic chromosomal aberration syndromes and 424 cases with hermaphroditism, mild sexual abnormalities, multiple anomalies, or mental & growth retardation were included. Results : The male to female ratio of autosomal aberration syndromes was 1.2 : 1. 78.6% of autosomal aberrations were diagnosed under 1 year of age, whereas 89.8% of sex chromosomal aberrations were diagnosed over 12 years of age. Among 1,180 cases, 612 ones had chromosomal aberrations(51.9%) : 590 of 756 cases suspected of chromosomal aberration syndromes had aberrations( 78.0%), whereas 22 of 424 showing the above other features had aberrations(5.2%). Autosomal aberrations appeared in 514 cases(83.8%) and sex chromosomal aberrations appeared in 98 cases(16.2%). The most frequently observed abberation in autosomal aberrations was Down syndrome, followed by E, D, B, A and C group aberrations. The most common abberation in sex chromosomal aberrations was Turner syndrome, followed by Klinefelter syndrome and Fragile X syndrome. Conclusion : It is of vital importance that patients suspected of chromosomal aberrations undergo chromosomal analysis. Further advanced chromosomal staining and molecular genetic methods will raise the detection rate of chromosomal aberrations.

• Clinical and Experimental Pediatrics
• /
• v.52 no.10
• /
• pp.1109-1118
• /
• 2009

Purpose : Metabolic syndrome (MS), characterized by obesity and insulin resistance, elicits risk factors such as hyperlipidemia, hypertension, and glucose intolerance with additive effects on atherosclerosis, leading to cardiovascular diseases. The purposes of this study were to evaluate the prevalence of MS among overweight and obese adolescents and to investigate the impact of obesity on the cardiovascular system. Methods : In all, 684 adolescents were included in the study. Blood pressure, body mass index (BMI), fasting blood glucose, total cholesterol, triglyceride, low-density-lipoprotein (LDL)-cholesterol, high-density-lipoprotein (HDL)-cholesterol, aspartate aminotransferase (AST), alanine aminotransferase (ALT), and high-sensitive C-reactive protein (hs-CRP) were measured in the patients with a BMI of >85 percentile. Brachial-ankle pulse wave velocity (BaPWV) and ankle brachial index were measured using Vascular Profiler (VP)-1000. Results : MS was confirmed in 19.5% of the overweight and obese adolescents and 50.8% of the obese adolescents. The systolic and diastolic blood pressure, height, weight, fat mass, %fat, BMI, obesity index, and waist circumference were higher in the overweight and obese adolescents with MS. Moreover, the triglyceride, AST, ALT, and hs-CRP levels were higher, whereas HDL-cholesterol level was significantly lower in this group. The overweight and obese adolescents with MS showed shorter diastolic and systolic times, higher heart rate and BaPWV, and longer E-wave deceleration time by echocardiography. Conclusion : Overweight and obese adolescents showed characteristic MS features such as hypertension and hyperlipidemia. Thus, obese adolescents predisposed to MS should be provided early treatment for obesity.

• The Korean Journal of Pesticide Science
• /
• v.10 no.1
• /
• pp.15-21
• /
• 2006

In order to monitor the pesticide residues in/on peppers and pepper powder and to assess their risk, pesticides in/on green pepper from 10 farmgates and fresh red pepper from 9 farmgates in Chungbuk area and pepper powder from 6 wholesale markets in Cheongju city were analyzed with a GLC and an HPLC. Also, pepper powder made by pulverization of the dried red pepper was analyzed to elucidate the change of pesticide residues in fresh red pepper by oven-drying. The number of pesticides detected from peen pepper, fresh red pepper, dried red pepper and pepper powder were 9, 12, 12, and 17, respectively, including 10 pesticides (one fungicide and nine insecticides) which were exceeded the maximum residue limits (MRLs). The exceeding rate of the MRL were higher in dried red pepper and pepper powder than in green pepper and fresh red pepper. Although some pesticides in peppers and pepper powder exceeded the MRLs, their estimated daily intake(EDI) were less than 1.6% of their acceptable daily intakes(ADIs), suggesting that it would be estimated to safe. By oven-drying of fresh red pepper at $65^{\circ}C$ for 72 hours, the weight of dried red pepper was from 1/5.9 from 1/7.8 of fresh red pepper, while the concentration of pesticide residue in dried red pepper increased from 1.7 to 8.2 times, suggesting that further reconsideration was required for the MRL of pepper powder.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.4
• /
• pp.380-391
• /
• 1993

The experimental study was made to propose the treatment method of wastewater in the high-density fish culture system. The BOD to COD ratios of effluents were almost same to 0.65 in the eel-farm, but were various in the farm rearing together with tilapia etc. A BOD rate curve of the eel-farm effluent could be described mathematically by the equation, $BODu=14.1(1-10^{-0.222t})+30.9(1-10^{-0.035(t-8)})$. Nitrification in Biological Fluidized Bed(BFB) system to treat the fish-farm wastewater could be reduce ammonium level up to $65{\sim}79\%$ when ammonium loading rates were between 0.014 and 0.075g $NH_4/g$ BVS-day. Nitrification efficiency was decreased by organic matters in the wastewater when ammonium loading was low(0.014 g $NH_4/g$ BVS-day). T-N removal ratios were decreased to increase loading in denitrification process, because of low C/N ratio. Based on much higher biological mass concentrations, BFB system takes many advantages of a practical viewpoint, such as stability of treatment efficiency and reduction of necessary site area for the facility, as compared with conventional treatment systems.

• Journal of Distribution Research
• /
• v.17 no.2
• /
• pp.93-115
• /
• 2012

This study empirically examines the impact of changes in market shares among retailing types on the price index. The retailing type is classified into 6 groups: department store, big mart, super market, convenient store, specialty merchant, and on-line store. The market shares of retailing types are calculated by the ratio of each retailing type monthly sales to total monthly retailing sales in which total retailing sales is the sum of each retailing type sales. We employed several price indices: consumer price index (CPI), CPI for living necessaries, and fresh food price index. In addition, this study used fundamental price indices based on 25 product families as well as 42 representative products. The empirical model also included several variables in order to control for the macroeconomic effects and those variables are the exchange rate, M1, an oil price, and the industrial production index. The data is monthly time-series data spanning over the period from January 2000 to December 2010. In order to test for the stability of data series, we conducted ADF test and PP test in which the model and length of lag were determined by the relevant previous literature and based on the AIC. The empirical results indicate that changes in market shares among retailing types have impacts on the price index. Table A shows that impacts differ as to which price index to use and which product families and products to use. For department store, it lowers the price of food and non-alcoholic beverages, home appliances, fresh food, fresh and vegetables, but it keeps the price high for fresh fruit. The big mart retailing type has a positive impact on the price of food, nut has a negative effect on clothing and foot wear, non-food, and fresh fruit. For super market, it has a positive impact on food and non-alcoholic beverages, fresh food, fresh shellfishes, but increases the price of CPI for living necessaries and non-food. The specialty merchant retailing type increases the price level of CPI for living necessaries and fresh fruit. For on-line store type, it keeps the price high for CPI for living necessaries and non-food as well as fresh fruit. For the analysis based on 25 product families shows that changes in market shares among retailing types also have different effects on the price index. Table B summarizes the different results. The 42 representative product level analysis is summerized in Table C and it indicates that changes in market shares among retailing types have different effects on the price index. The study offers the theoretical and practical implication to these findings and also suggests the direction for the further analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.302-307
• /
• 2002

To investigate difference of components changes in salt-fermented anchovy, Engaulis japonicus sauce during 18 months fermentation by tank size, various chemical properties were examined at 2$\~$3 months intervals. The contents of total and amino nitrogen, total ATP related compounds increased gradually during 18 months of fermentation, and showed higher content in salt-fermented anchor sauce produced by large tank scale (LTS) product than those of small tank scale (STS) product during fermentation. Hypoxanthine and uric acid were the most abundant in ATP related compounds, ranging from $81.1\%$ to $90.4\%$, The cross point of inosine (HxR) + hypoxanthine (Hx) and uric acid was faster in LTS with 10.3 months fermentation than in STS with 12.6 months fermentation. After 18month of fermentation, the LTS was rich in free amino acids, such as glutamic acid, alanine, aspartic acid, valine, Iysine in that order. On the other hand, the STS was rich in free amino acids, glutamic acid, aspartic acid, alanine, vsine, valine in that order. Absorbance at 453 nm were higher in STS than in STS, but was no difference the rate of increase during fermentation.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.12
• /
• pp.913-921
• /
• 2011

This study examined the overall feasibility of low carbon green village formed in rural area. The check method is analyzing its environmental and economic feasibility and energy self-reliance. The biomass of the villages was set as 28 ton/day of livestock feces and 2 ton/day of cut fruit tree branches which make up the total of 30 ton/day. The facility consisted of a bio gasfication facility using wet (livestock feces) biomass and combined heat power generator, composting facility and wood boiler using dry (cut fruit tree branches) biomass. When operating the system, 540,540 kWh/yr of electricity and 1,762 Gcal/yr of heat energy was produced. The region's electricity energy and heat energy self-reliance rate will be 100%. The economic feasibility was found as a loss of 140 million won where the facility installation cost is 5.04 billion won, operation cost is 485.09 million won and profit is 337.12 million won. There will be a loss of about 2.2 billion won in 15 years but in the environmental analysis, it was found that crude replacement effect is about 178 million won, greenhouse gas reduction effect is about 92 million won making up the total environmental benefit of 270 million won. This means, there will be a yearly profit of about 130 million won. In terms of its environmental and economic feasibility and energy self-reliance, this project seemed to be a feasible project in overall even if it manages to get help from the government or local government.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.