• BMB Reports
• /
• v.40 no.3
• /
• pp.341-348
• /
• 2007

Herpesvirus saimiri (HVS), a member of the $\delta$-herpesvirus family, encodes an oncoprotein called Saimiri Transforming Protein (STP) which is required for lymphoma induction in non-human primates. Previous study has shown that STP-C, an oncoprotein of HVS, activates NF-$\kappa$B signaling pathway. However, the detailed mechanism of STP-Cmediated NF-$\kappa$B activation has not been reported yet. We first report that STP-C interacts with TRAF6 protein in vivo and in vitro and further investigation shows that $Glu_{12}$ residue of STP-C is critical for binding to TRAF6. Introduction of ubiquitin together with STP-C augments NF-$\kappa$B activity compared to that of STP-C expression alone. STP-C expression further induces ubiquitination of endogenous TRAF6. In addition, either a deubiquitination enzyme, CYLD or a dominant negative E2-conjugation enzyme reduced NF-$\kappa$B activity in spite of the presence of STP-C, supporting that the interaction between STP-C and TRAF6 induces ubiquitination of TRAF6. NF-$\kappa$B activation by STP-C through the ubiquitinated TRAF6 causes the increased production of IL-8, an inflammatory chemokine and the enhanced expression of costimulatory molecule ICAM, which might ultimately contribute cellular transformation by the exposure of HVS-infected cells with inflammatory microenvironment and chronic activation.

• Journal of Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.148-154
• /
• 2007

Volatile components of the essential oils of Satsuma mandarin (C. unshiu), Dangyuza (C. grandis), Yuza (C. junos), Byungkyul (C. playtymamma), Jinkyul (C. sunki), and Hakyul (C. natsudaidai) grown in Jeju Island were isolated from the fruit peels by hydro distillation and determined by GC-MS. GC-MS analysis identified 58 compounds, with main components being d-limonene $(64.01{\sim}79.34%),\;{\beta}-myrcene\;(3.01{\sim}26.53%),\;{\gamma}-terpinene\;(0.11{\sim}12.88%),\;{\beta}-pinene\;(0.78{\sim}4.74%),\;and\;{\alpha}-pinene\;(1.01{\sim}2.55%)$. Differences in compositions and contents of the essential oils were observed among citrus varieties. Effects of citrus oils on growth inhibitions of Escherchia coli, Staphyllococcus epidermidis, and Candida albicans were investigated using disc diffusion assay and minimal inhibitory concentration (MIC) assay. The essential oils inhibited growths of the test organisms, exhibiting higher levels of activity against Gram-positive S. epidermidis (MIC values $0.04{\sim}0.17mg/mL$), whereas Gram-negative E. coli was moderately resistant (MIC values $1.66{\sim}20.30mg/mL$). MIC of citrus essential oils ranged from $0.82{\sim}23.69mg/mL$ against C. albicans. The essential oils obtained from C. sunki, C. grandis, and C. playtymamma showed the highest antimicrobial activities against S. epidermidis and C. albicans, indicating their potential as natural antimicrobial agents.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.3
• /
• pp.105-116
• /
• 2017

Several wireless localization algorithms are evaluated for the IR-UWB-based indoor location with the assumption that the ranging measurements contain the channelwise Non-Calibration Error (NCE). The localization algorithms can be divided into the Model-free Localization (MfL) methods and Model-based Kalman Filtering (MbKF). The algorithms covered in this paper include Iterative Least Squares (ILS), Direct Solution (DS), Difference of Squared Ranging Measurements (DSRM), and ILS-Common (ILS-C) methods for the MfL methods, and Extended Kalman Filter (EKF), EKF-Each Channel (EKF-EC), EKF-C, Cubature Kalman Filter (CKF), and CKF-C for the MbKF. Experimental results show that the DSRM method has better accuracy than the other MfL methods. Also, it demands smallest computation time. On the other hand, the EKF-C and CKF-C require some more computation time than the DSRM method. The accuracy of the EKF-C and CKF-C is, however, best among the 9 methods. When comparing the EKF-C and CKF-C, the CKF-C can be easily used. Finally, it is concluded that the CKF-C can be widely used because of its ease of use as well as it accuracy.

• Journal of Aquaculture
• /
• v.21 no.4
• /
• pp.265-271
• /
• 2008

Upper temperature tolerance of the turbot Scophthalmus maxim us, one of the popular aquaculture species in European community and China, was evaluated in terms of survival and growth at $20^{\circ}C$, $23^{\circ}C$, $26^{\circ}C$, or $29^{\circ}C$. Best growth was achieved at temperature $20^{\circ}C$ in this experiments. The fish exposed to $20^{\circ}C$ or $23^{\circ}C$ were comparable in survival, condition factor and feed conversion efficiency reminiscent of the latter temperature to be agreeable for the fish. The temperature over $23^{\circ}C$ appeared to be the temperatures beyond the fish can tolerate. For instance, the fish exposed to 26 showed mortality of 60.9% by day 60; none of the fish exposed to $29^{\circ}C$ survived beyond day 7. Culture densities between 80 and $200\;fish/m^2$ did not influence the survival, growth, condition factor and specific growth rate of the fish. The final production of the culture density experiment was $10\;kg/m^2$ on average. These results imply that the location where water temperature remains lower than $25^{\circ}C$ during summer can be a candidate site for the turbot aquaculture.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.144.2-144.2
• /
• 2016

Diamond-like carbon (DLC) coatings have been widely applied to the mechanical components, cutting tools due to properties of high hardness and wear resistance. Among them, hydrogenated amorphous carbon (a-C:H) coatings are well-known for their low friction properties, stable production of thin and thick film, they were reported to be easily worn away under high temperature. Non-hydrogenated tetrahedral amorphous carbon (ta-C) is an ideal for industrial applicability due to good thermal stability from high $sp^3$-bonding fraction ranging from 70 to 80 %. However, the large compressive stress of ta-C coating limits to apply thick ta-C coating. In this study, the thick ta-C coating was deposited onto Inconel alloy disk by the FCVA technique. The thickness of the ta-C coating was about $3.5{\mu}m$. The tribological behaviors of ta-C coated disks sliding against $Si_3N_4$ balls were examined under elevated temperature divided into 23, 100, 200 and $300^{\circ}C$. The range of temperature was setting up until peel off observed. The experimental results showed that the friction coefficient was decreased from 0.14 to 0.05 with increasing temperature up to $200^{\circ}C$. At $300^{\circ}C$, the friction coefficient was dramatically increased over 5,000 cycles and then delaminated. These phenomenon was summarized two kinds of reasons: (1) Thermal degradation and (2) graphitization of ta-C coating. At first, the reason of thermal degradation was demonstrated by wear rate calculation. The wear rate of ta-C coatings showed an increasing trend with elevated temperature. For investigation of relationship between hardness and graphitization, thick ta-C coatings(2, 3 and $5{\mu}m$) were additionally deposited. As the thickness of ta-C coating was increased, hardness decreased from 58 to 49 GPa, which means that graphitization was accelerated. Therefore, now we are trying to increase $sp^3$ fraction of ta-C coating and control the coating parameters for thermal stability of thick ta-C at high temperatures.

• 대한방사선치료학회:학술대회논문집
• /
• 2005.06a
• /
• pp.23-26
• /
• 2005

Introduction: To evaluate whether modified MUPIT applicator can effectively eradicate recurrent tumor in uterine cervix cancer and reduce rectal complication after complete radiation treatment. Methods and Materials: Modified MUPIT applicator basically consists of an acrylic cylinder with flexible brain applicator , an acrylic template with a predrilled array of holes that serve as guides for interstitial needles and interstitial needles. CT scan was performed to determine tumor volume and the position of interstitial needles. Modified MUPIT applicator was applied to patient in operation room and the accuracy for position of interstitial needles in tumor volume was confirmed by CTscan. Brachytherapy was delivered using modified MUPIT applicator and RALS (192-Ir HDR) after calculated computer planning by orthogonal film. The daily dose was 600cGy and the total dose was delivered 3000cGy in tumor volume by BID. Rectal dose was measured by TLD at 5 points so that evaluated the risk of rectal complication. Result: The application of modified MUPIT applicator improved dramatically dose distributions in tumor volume and follow-up of 3 month for this patient was clinically partial response without normal tissue complication, Rectal dose was measured 34.1cGy, 57.1cGy, 103.8cGy, 162.7cGy, 165.7cGy at each points, especially the rectal dose including previous EBRT and ICR was 34.1cGy, 57.1cGy Conclusion: Patients with locally recurrent tumor in uterine cervix cancer treated with modified MIUPIT applicator can expect reasonable rates of local control. The advantages of the system are the fixed geometry Provided by the template and cylinders, and improved dose distributions in irregular tumor volume without rectal complication

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2009.05a
• /
• pp.60-60
• /
• 2009

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.252-254
• /
• 2005

전력계통을 감시, 보호하기 위해서 해당 도메인에 맞게 전력감시 시스템을 운용한다. 전기품질을 위해서 전기품질감시 시스템을, 전력설비의 노후 정도, 교체기간을 감시하기 위해서 전력설비진단 시스템을 각각 운용한다. 최근 전력 IT 기술의 발달과 전력감시 시스템의 효율적 관리가 필요하게 되면서 국내외 선진사들은 전력시스템의 통합 솔루션을 소개, 개발하고 있는 추세이다. 본 논문에서는 전력감시 시스템들을 총합한 전력감시진단종합 시스템을 개 발하였고 이를 소개하고자 한다.

• 대한생식의학회:학술대회논문집
• /
• 2002.05a
• /
• pp.87.2-88
• /
• 2002

• Proceedings of the PSK Conference
• /
• 2001.04a
• /
• pp.127.1-127.1
• /
• 2001