• Preventive Nutrition and Food Science
• /
• v.12 no.3
• /
• pp.141-147
• /
• 2007

Cordycepin (3'-deoxyadenosine), which comes from Cordyceps militaris, the Chinese medicinal fungal genus Cordyceps, is used in the treatment of various diseases such as cancer and chronic inflammation. We recently reported that cordycepin has a novel antiplatelet effect through the down regulation of $[Ca^{2+}]_{i}$ and the elevation of cGMP/cAMP production. In this study, we further investigated the effect of cordycepin on collagen-induced platelet aggregation in the presence of cGMP-dependent protein kinase (PKG)- or cAMP-dependent protein kinase (PKA)-inhibitor. PKG inhibitor Rp-8-pCPT-cGMPS potentiated the collagen-induced platelet aggregation, but PKA inhibitor Rp-8-Br-cAMPS did not. However, both Rp-8-pCPT-cGMPS and Rp-8-Br-cAMPS reduced inhibition by cordycepin of collagen-induced platelet aggregation. Moreover, cordycepin inhibited $Ca^{2+}-dependent$ phosphorylation of both 47 kDa- and 20 kDa-protein in the presence of both PKG inhibitor and PKA inhibitor. Taken altogether, these results suggest that the inhibitory effect of cordycepin on collagen-induced platelet aggregation is associated with cGMP/PKG- and cAMP/PKA-pathways, and thus cordycepin may be an efficacious intervention against platelet aggregation-mediated thrombotic disease.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.42-48
• /
• 2018

Silicon has attracted extensive attention due to its high theoretical capacity, low discharge potential and non-toxicity as anode material for lithium ion batteries. In this study, Si-CNT-C composites were fabricated for use as a high-efficiency anode material in a lithium ion battery. Aerosol self-assembly and post-heat treatment processes were employed to fabricate the composites. The morphology of the Si-CNT-C composites was spherical and an average particle size was $2.72{\mu}m$. The size of the composite increased as concentration of Si and CNT increased in the precursor solution. In the Si-CNT-C composites, CNT and C carbonized from glucose were attached to the surface of Si particles. Electrochemical measurement showed that the cycle performance of Si-CNT-C composites was better than that of silicon particles.

• Korean Journal of Materials Research
• /
• v.21 no.3
• /
• pp.180-185
• /
• 2011

This study is aimed to increase the activity of cathodic catalysts for PEMFCs(Polymer Electrolyte Membrane Fuel Cells). we investigated the temperature effect of 20wt% Pt/C catalysts at five different temperatures. The catalysts were synthesized by using chemical reduction method. Before adding the formaldehyde as reducing agent, process was undergone for 2 hours at the room temperature (RT), $40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ and $100^{\circ}C$, respectively. The performances of synthesize catalysts are compared. The electrochemical oxygen reduction reaction (ORR) was studied on 20wt% Pt/C catalysts by using a glassy carbon electrode through cyclic voltammetric curves (CV) in a 1M H2SO4 solution. The ORR specific activities of 20wt% Pt/C catalysts increased to give a relative ORR catalytic activity ordering of $80^{\circ}C$ > $100^{\circ}C$ > $60^{\circ}C$ > $40^{\circ}C$ > RT. Electrochemical active surface area (EAS) was calculated with cyclic voltammetry analysis. Prepared Pt/C (at $80^{\circ}C$, $100^{\circ}C$) catalysts has higher ESA than other catalysts. Physical characterization was made by using X-ray diffraction (XRD) and transmission electron microscope (TEM). The TEM images of the carbon supported platinum electrocatalysts ($80^{\circ}C$, $100^{\circ}C$) showed homogenous particle distribution with particle size of about 2~3.5 nm. We found that a higher reaction temperature resulted in more uniform particle distribution than lower reaction temperature and then the XRD results showed that the crystalline structure of the synthesized catalysts are seen FCC structure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.5
• /
• pp.690-699
• /
• 2014

Three feeding trials were conducted to evaluate the effects of feeding rate and water temperature on growth and body composition of juvenile Korean rockfish, Sebastes schlegeli rearing at 3 different water temperatures. A total of 270 fish (each experiment) individual body weight (BW) averaging $16{\pm}0.3g$ ($mean{\pm}SD$) were fed a commercial diet for 4 wk at $16^{\circ}C$, $20^{\circ}C$, and $24^{\circ}C$. At each temperature, triplicate tanks were assigned to one of 6 feeding rates: 1.5%, 2.5%, 2.8%, 3.1%, 3.4%, and satiation (3.7% BW/d) at $16^{\circ}C$, 1.9%, 2.9%, 3.2%, 3.5%, 3.8% and satiation (4.1% BW/d) at $20^{\circ}C$ and 1.7%, 2.7%, 3.0%, 3.3%, 3.6%, and satiation (3.9% BW/d) at $24^{\circ}C$ water temperature. Weight gains of fish in satiation and 3.4% groups at $16^{\circ}C$, in satiation and 3.8% groups at $20^{\circ}C$ and in satiation and 3.6% groups at $24^{\circ}C$ were significantly higher than those of fish in the other treatments (p<0.05). A broken line regression analysis of weight gain indicated that optimum feeding rates of juvenile Korean rockfish were 3.41% at $16^{\circ}C$, 3.75% at $20^{\circ}C$ and 3.34% at $24^{\circ}C$ water temperature. Results of the present study indicate that the optimum feeding rate could be >3.1% but <3.41% at $16^{\circ}C$, >3.5% but <3.75% at $20^{\circ}C$ and >3.0% but <3.34% at $24^{\circ}C$. As we expected results suggest that fish performed better at $20^{\circ}C$ than $16^{\circ}C$ or $24^{\circ}C$ water temperature and the optimum feeding rate could be 3.1% BW/d to 3.7% BW/d in 16 g of juvenile Korean rockfish.

• Food Science and Biotechnology
• /
• v.15 no.5
• /
• pp.817-819
• /
• 2006

8-Quinolinol and other quinolinol derivatives were evaluated with regard to their growth-inhibitory effects against intestinal bacteria, using the paper disk-agar diffusion method. The observed growth responses varied according to the chemicals and dosages used, as well as the bacterial species tested. 8-Quinolinol showed a significant inhibitory effect against Clostridium difficile, C. perfringens, and Escherichia coli, at 5, 2, 1, and 0.5 mg/disk, and also exhibited a very strong inhibitory effect at 0.25 mg/disk. At low concentrations, 8-quinolinol had strong inhibitory effects against C. perfringens at 0.1 and 0.05 mg/disk; 8-quinolinol also manifested a moderate inhibitory effect against C. perfringens at 0.025 mg/disk. Furthermore, 8-quinolinol revealed moderate and weak growth inhibition against C. difficile and E. coli at concentrations of 0.1 and 0.05 mg/disk, respectively, but 2-quinolinol, 4-quinolinol, and 6-quinolinol evidenced no growth inhibition against B. bifidum, B. longum, C. difficile, C. perfringens, E. coli, or L. casei. The inhibitory effects of 8-quinolinol against C. difficile, C. perfringens, and E. coli lead to its consideration as a possible therapeutic modality for the treatment of diseases associated with harmful intestinal bacteria.

• Journal of the Korean Ceramic Society
• /
• v.45 no.5
• /
• pp.303-308
• /
• 2008

Mullite precursors were synthesized with aluminosilicate gels from mixture of aluminum nitrate and sodium orthosilicate by the geopolymer technique at ambient temperature. Then, the gel was heat-treated in air up to $1200^{\circ}C$ at intervals of $100^{\circ}C$. Raw and heat-treated gels were characterized by TG-DTA, XRD, FTIR, $^{29}Si$ MAS-NMR, TEM. The result to examine the crystallization of behavior though DTA, the synthesized precursors were crystallized in the temperature range from $950^{\circ}C$ to $1050^{\circ}C$. The XRD results showed that the gel compositions were begun to crystallize at various temperature. Also, it was found that the precursors of M-4 begun to crystallize at about $950^{\circ}C$. The M-4 XRD peaks were characterized better than $M-1{\sim}M-3$ at $1000^{\circ}C$. The formation temperature of mullite in this study is much lower than that of previous sol-gel methods, which crystallized at up of $1200^{\circ}C$. TEM investigations revealed that the sample with 10 nm particle size was obtained via heat-treated at $1000^{\circ}C$ for M-4.

• Advances in Energy Research
• /
• v.2 no.1
• /
• pp.21-31
• /
• 2014

The use of a microporous membrane along with Au/C catalyst for direct glycerol alkaline fuel cell was investigated. In comparison with Nafion 112, the microporous Celgard 3401 membrane provides a better cell performance due to the lower ionic resistance as confirmed by impedance spectra. The single cell using Au/C as anode catalyst prepared by using PVA protection techniques provided a higher maximum power density than the single cell with commercial PtRu/C at $18.65mW\;cm^{-2}$ The short-term current decay studies show a better stability of Au/C single cell. The higher activity of Au/C over PtRu/C was owing to the lower activation loss of Awe. The magnitude of current decay indicates a low problem of glycerol crossover from anode to cathode side. The similar performance of single cell with and without humudification at cathode points out an adequate transport of water through the microporous membrane.

• Journal of Embryo Transfer
• /
• v.31 no.3
• /
• pp.185-190
• /
• 2016

During the ovary preservation in low temperature, the cumulus oocyte complexes(COCs) lose their developmental competences after in vitro fertilization. We used phosphate-buffered saline (PBS) as a basic solutions of at various temperatures (25, 15 or $5^{\circ}C$) and supplemented them with 1mM glucose and 0.5mM glutamine as a source of carbohydrate metabolites. After recovery of COCs and in vitro fertilization, a significantly higher number of oocytes developed into blastocysts. The developmental competence of embryos that were originated from ovaries preserved at $15^{\circ}C$ was increased compared to those of 25 or $5^{\circ}C$. The maturation rate of oocytes was not differed between 24 and 36 h at $15^{\circ}C$ but showed lower than control group (71% versus 78%). In vitro-fertilized oocytes from ovaries stored at $25^{\circ}C$ for 24 h or at $5^{\circ}C$ for 24 h had a significantly decreased developmental potentials, but at $15^{\circ}C$ did not (27% versus 29% of blastocysts to develop into day 8). With these results, bovine ovaries can be preserved at $15^{\circ}C$ for 36 h without decreasing developmental capacity of in vitro-fertilized oocyte at least to the blastocyst stage. This information provides valuable information of preserving ovaries for embryo transfer or in vitro embryo production.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1003-1012
• /
• 2014

We examined the combined impacts of future increases of $CO_2$ and temperature on the growth of four marine diatoms (Skeletonema costatum, Chaetoceros debilis, Chaetoceros didymus, Thalassiosira nordenskioeldii). The four strains were incubated under four different conditions: present ($pCO_2$: 400ppm, temperature: $20^{\circ}C$), acidification ($pCO_2$: 1000ppm, temperature: $20^{\circ}C$), global warming ($pCO_2$: 400ppm, temperature: $25^{\circ}C$), and greenhouse ($pCO_2$: 1000ppm, temperature: $25^{\circ}C$) conditions. Under the condition of higher temperatures, growth of S. costatum was suppressed, while C. debilis showed enhanced growth. Both C. didymus and T. nodenskioldii showed similar growth rates under current and elevated temperature. None of the four species appeared affected in their cell growth by elevated $CO_2$ concentrations. Chetoceros spp. showed increase of pH per unit fluorescence under elevated $CO_2$ concentrations, but no difference in pH from that under current conditions was observed for either S. costatum or T. nodenskioeldii, implying that Chetoceros spp. can take up more $CO_2$ per cell than the other two diatoms. Our results of cell growth and pH change per unit fluorescence suggest that both C. debilis and C. didymus are better adapted to future oceanic conditions of rising water temperature and $CO_2$ than are S. costatum and T. nodenskioeldii.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.766-774
• /
• 1998

32$0^{\circ}C$, 40%NaOH 용액의 autoclave에서 약 300wppm의 탄소를 함유하고 있는 15Cr-9Fe-balanced Ni 합금 판상시편에 대해 응력부식 저항성을 조사하였다. 부식시편은 $700^{\circ}C$, 100시간 동안의 열처리로 합금내부에 석출될 수 있는 가능한 한 많은 양의 크롬계 탄화물을 석출시킨 후, 다시 재용해에 의해 크롬계 탄화물의 형태를 조절하는 $800^{\circ}C$-$950^{\circ}C$범위의 최종열처리를 시행하고 급냉시킨 다음 U-자형으로 응력을 가하여 준비되었다. 최종열처리 온도가 올라감에 따라 시편들의 입계응력부식균열(IGSCC ) 전파속도는 $900^{\circ}C$까지는 거의 직선적으로 증가하다가 $950^{\circ}C$에서는 $700^{\circ}C$에서 얻은 값보다도 더 낮게 감소하였다. 즉, 크롬계 탄화물이 재용해되어 그 밀도가 감소함에 따라 IGSCC저항성이 감소하다가 완전히 재용해된 $950^{\circ}C$ 열처리 조건에서 오히겨 가장 큰 IGSCC 저항성을 나타내었다. 이와같은 최조열처리 온도에 따른 니켈계 합금 600의 부식거동은 입계에 존재하는 크롬계탄화물의 형태변화 때문이 아니라 입계에서 탄소-크롬계 탄화물-크롬간의 상평형에 의해 이루어지는 탄소의 입계편석량이 크롬계탄화물이 존재할 때에는 열처리 온도에 따라 증가하다가 그것이 완전히 재용해 되었을 때 가장 낮아지기 때문인 것으로 생각된다.