• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.591-597
• /
• 2008

In this paper, we present a improved rate distortion optimization (RDO) for H.264 intra coding. By using new mode decision criteria pass for $I4{\times}4$ in company with the original RDO, the proposed method can achieve the better coding efficiency comparing with the original RDO. Our experimental results show that the proposed algorithm can archive about $0.64{\sim}1.6578%$ bit rate decrease at the same PSNR and $0.049{\sim}0.101dB$ PSNR increase at the same bit rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.925-931
• /
• 2008

In video coding standard H.264/AVC, variable block size mode algorithm improves compression efficiency but has need of a large amount of computation for various block modes and mode decision. Meanwhile, decided inter block modes depend on the complexity of a block image, and then the more complex a macroblock is, the smaller its block size is. This paper proposes fast inter block mode decision algorithm. It limits valid block modes to the block modes with a great chance for decision using the image complexity and carries out motion estimation rate-distortion optimization with only the valid block modes. In addition to that, it applies fast motion estimation PDE to the valid block modes with only the $16{\times}16$ block mode. The reference software JM 9.5 was executed to estimate the proposed algorithm's performance. The simulation results showed that the proposed algorithm could save about 24.12% of the averaged motion estimation time while keeping the image quality and the bit rate to be -0.02dB and -0.12% on the average, respectively.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.111-112
• /
• 2018

4Quadrant 동작하는 ITER CS, VS1, CC AC/DC Converter Local Controller는 전압제어 모드로 동작하며 초전도 코일에 제어된 전류를 충전, 유지, 방전하며 제어기 내외부 조건에 의한 보호 동작이 요구된다. 코일 전류가 제로 영역에 있을 때 플라즈마 붕괘로 인한 코일 전류 blocking을 방지하기 위한 순환전류 모드가 요구 되며 코일 전류에 따른 컨버터 브릿지의 동작모드가 결정된다. 본 논문은 RTDS를 이용하여 제어기의 성능을 검증한 내용을 논의하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.593-598
• /
• 2018

Computational fluid dynamics was used to develop a heat-recovery ventilator for preventing freezing in cold weather. An optimal internal return damper was applied, and a prototype was made for frost and freezing experiments. A total of 16 models were used to design the optimal internal return damper with the maximum exhaust recirculation ratio. The exhaust recirculation ratio of the exhaust air to the outdoor air was 59.9-62.3%. The tests showed that frost and freezing did not occur at outdoor air temperatures of $-15^{\circ}C$ or higher in both exhaust recirculation operation and normal operation. However, at an outdoor air temperature of $-20^{\circ}C$, no freezing occurred in the outdoor air area when the internal return damper was opened by 45 degrees. Heat recovery ventilators for preventing cold weather frost and freezing should be operated in two operation modes: normal and exhaust recirculation mode. An operating algorithm was developed for the heat-recovery ventilator operating in normal mode when the outdoor temperature is higher than $-15^{\circ}C$ and recirculation mode when the temperature is lower.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.25-32
• /
• 2006

An advanced method of Relaxed Static Stability (RSS) is utilized for improving the aerodynamic performance of modern version supersonic jet fighter aircraft. The flight control system utilize RSS criteria in both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. The T-50 advanced trainer employs the RSS concept in order to improve the aerodynamic performance and the flight control law in order to guarantee aircraft stability. The longitudinal two modes are the short period with high frequency and the phugoid mode with low frequency. The design goals of longitudinal control laws is concerned with the short period damping and frequency optimization using lower order equivalent system and utilizing the requirement of MIL-F-8785C. Analysis of short period mode has been and continues to be performed This paper addresses the analysis of aircraft phugoid node characteristics such as damping, natural frequency, and analysis of aircraft pitch motion that impacted by angle of attack limiter and auto pitch attitude control law.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.223-230
• /
• 1999

A conventional sliding mode control approach is often impractical or difficult when it is applied to high order process b because the number of tuning parameters in the sliding mode controller increases with the order of the plant. C Camacho(l996) proposed a design method of a fixed structure sliding mode controller based on a first order plus dead t time approximation to the higher-order process. But, his method has such problems as chattering, over‘shoot, and c command following due to the Taylor the approximation en‘ors for the time delay term of the first order model. In this p paper, a new design technique for a sliding mode controller based on the modified Taylor approximation considered a w weight is developed to improve the Camacho's problems.

• Composites Research
• /
• v.22 no.5
• /
• pp.30-36
• /
• 2009

The failure strengths and modes in carbon fiber reinforced polymeric composites, with two serial bolt-fastened composite joints, were investigated to evaluate the typical joint configurations of composite components. The parametric studies were performed experimentally at room temperature dry and elevated temperature wet, $82.2^{\circ}C$ on several different laminate configurations. Based on the experimental data presented, two basic load-displacements curves are observed. Each failure mode has the characteristic curve. It is showed that the bearing failure mode occurs in elevated temperature wet condition. It is analysed that the strength of bearing failure mode is not highly depending on the effective modulus of specimen. The failure strength at elevated temperature wet is decreased by the cause of interfacial deterioration between fiber and matrix with moisture absorption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3C
• /
• pp.271-278
• /
• 2006

Rate-constrained coding is one of the many coding-efficiency oriented tools of H.264/AVC, but mode decision process of RDO(Rate distortion optimization) requires high computational complexity. Many fast mode decision algorithms have been proposed to reduce the computational complexity of mode decision. In this paper, we propose two algorithms for reduction of mode decision in H.264/AVC, which are the fast reference frame selection and selective intra prediction mode decision. Fast reference frame selection is efficient for inter predication and selective intra prediction mode decision can effectively reduce excessive calculation load of intra prediction mode decision. The simulation results showed that the proposed methods could reduce the encoding time of the overall sequences by 44.63% on average without any noticeable degradation of the coding efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.193-202
• /
• 2010

In this paper, we propose a fast algorithm that can reduce the complexity for inter mode decision of the H.264 encoder. The main idea consists of two techniques. The first one is the technique early terminating mode decision process. We focused on the skip and $16{\times}16$ mode because these modes occupies the largest portion in most of sequences. The second one is the technique skipping unnecessary $8{\times}8$ modes. The time consumption caused by the $8{\times}8$ mode is very considerable. Therefore if we can extract the unnecessary $8{\times}8$ mode calculation well, a large amount of time can be saved in total encoding process. The experimental results show that the proposed algorithm can achieve up to 43% speed up ratio with insignificant PSNR loss. The increase of total bits encoded is also not noticeable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4C
• /
• pp.321-329
• /
• 2008

H.264/AVC video coding standard enables a considerably higher improvement in coding efficiency compared with previous standards such as MPEG-2, H.263 and MPEG-4. To achieve this, for each macro-block in H.264/AVC, Rate-Distortion Optimization (RDO) technique is employed to select the best motion vector, reference frame, and macro-block mode. As a result, computational complexity is increased significantly whereas RDO achieve higher improvement. This paper presents fast intra mode selection algorithm based on constraints of frequency characteristics which are derived from intra coding modes of H.264/AVC. First of all, we observe the features of each intra mode through the frequency analysis of image. And then proposed Frequency Error Costs (FECs) are calculated to select the best mode which has minimum cost. Computational complexity is considerably reduced because rate-distortion costs only calculate the candidate modes which are set of best mode and its neighbouring two modes. Experimental results show that proposed algorithm reduces the complexity dramatically maintaining the rate-distortion performance compared with H.264/AVC reference software.