• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.901-906
• /
• 2005

In this paper, we propose a novel MHCOC (Mapped High Capacity Orthogonal Code) SS(Spread Spectrum) technique that reduces high PAPR (Peak power to Average Power Ratio) of HCOC SS system which was proposed to support high data rate transmission, and we compare to the conventional modulation technique such as MQAM SS that can transmit the same number of symbols at the same time. Moreover, we study on adaptation of this system to satisfy QoS (Quality of Service) that services the proper data rate according to the propagation channel quality information. We perform computer simulation to verify the performance of the proposed system and analyze its availability.

• Information and Communications Magazine
• /
• v.19 no.10
• /
• pp.78-92
• /
• 2002

고용량 파장다중분할(WDM) 전송 시스템의 수요가 폭발적으로 증가함에 따라 기존의 erbium-doped fiber amplifiers(EDFA)가 제공하는 이득 대역을 넘어서는 대역폭의 광증폭기의 개발이 촉진되고 있다. 에르븀 이외의 새로운 회토류 첨가물을 사용한 증폭기와 광섬유 내에서의 비선형 현상인 라만 산란에 의한 라만 증폭기에 집중적인 연구가 그 예라 하겠다. 최근 몇 년간의 집중적인 연구를 통하여 현재의 광대역 광 증폭기는 기존의 EDFA(C 벤드 EDFA)가 제공하는 광이득대역의 4∼5배 정도를 쉽게 제공할 수 있다. 이러한 목적을 가지고 통신시장에서 사용될 수 있는 1500nm 근처 대역의 증폭에 대한 세가지의 증폭 기술이 연구되고 있다. 우선, S+밴드(1450-1480nm)와 S밴드(1480-1530nm)의 증폭을 위한 thulium-doped fluoride fiber amplifiers(TDFFA), C 밴드(1530-1560nm)와 L 밴드(1570-1610nm)를 위한 EDFA, 그리고 마지막으로 100nm 이상의 이득대역과 S+에서 L밴드까지 증폭파장대역의 선택이 자유로운 라만 증폭기가 있다. 또한 위의 세 기술을 직렬 또는 병렬로 조합하여 사용하는 증폭기가 있다. 이러한 증폭기 모두에 대해서 실험적인 보고는 많이 있었으나, 내부의 에너지 준위가 복잡하여 증폭 기제가 복잡하고, 실험 파라미터를 측정하기가 어려워서 광대역증폭기의 성능을 예측하기 어려운 점이 있었다. 게다가 이러한 상황에서 광대역증폭기에 대한 해석적이거나 수치해석적인 심도깊은 연구가 부족하여 앞으로 증폭기를 다양하게 응용하기 위한 성능의 예측이 어려울 것으로 보인다. 이는 광대역 증폭기 기반의 전송 시스템을 성공적으로 적용하는데 제한을 줄 것이다. 따라서 본 논문에서는 광대역 증폭기(C/L밴드 EDFA, 라만 증폭기, TDFA)에 대한 실험적인 분석뿐만 아니라 해석적, 수치해석적인 분석 방법까지 그 응용의 예와 함께 소개할 것이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12C
• /
• pp.759-763
• /
• 2011

In this paper, a dual-band T-shaped microstrip monopole antenna with a pair of slits for 2.4/5.2/5.8-GHz wireless local area networks (WLANs) is proposed. A pair of T-shaped slits is loaded on a T-shaped monopole antenna fed by microstrip line in order to obtain dual-band operation as well as to reduce the antenna size. It is demonstrated from experimental results that the proposed antenna can cover all the required bands for WLAN. The measured impedance bandwidth for VSWR<2 is about 5.7% (2.37-2.51GHz) in the lower frequency band and about 28.8% (4.76-6.35GHz) in the higher frequency band. The measured peak gains are about 1.33 dBi to 1.66 dBi in the 2.4GHz band, 3.50 dBi to 3.95 dBi in the 5.25GHz band, and 2.06 dBi to 2.34 dBi in the 5.8GHz band.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.68-74
• /
• 2016

In this paper, we present a compact planar dual band rejection Ultra Wide Band(UWB) antenna with folded parasitic element. The proposed antenna is consist of a hexagonal planar radiation patch antenna with a folded parasitic element which is located over the top and bottom surface. In contrast with other antenna which rejects single band using one method, folded parasitic element rejects dual band using one simple structure. Owing to folded parasitic element, dual-rejected properties are achieved in the Worldwide Interoperability for Microwave Access(WiMAX), C-band, and Wireless Local Area Network(WLAN) bands. The bandwidth of the proposed antenna was measured as 3.1~10.6 GHz for voltage standing wave ratio(VSWR) less than 2, except for the dual rejection bands of 3.4~4.2 GHz and 5.15~6.00 GHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.217-222
• /
• 2018

The deterioration of the Battery is decided by SoC and SoH. To determine Battery deterioration, SoC measurement method of Battery by Transfer Function was studied. The SoC of the Battery changes most greatly in the 1Hz band where the DC resistance is detected. but it is a narrow band to observe, therefore, the observation band was moved to 1kHz using the tone busrst signal. Welch's method was used to observe the frequency domain characteristics of the signal. As a result of the spectral estimation, it was confirmed that the response signal of the battery is 1dB difference when the SoC is 40%, 60%, and 80%, respectively. Through this, Proposed the new method of Battery SoC measurement.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.495-496
• /
• 2008

본 논문에서는 UHF 대역 RFID 의 국제표준인 ISO/IEC 18000-6C 표준을 만족하는 태그 칩을 위한 저전력 고성능 아날로그 회로를 설계하였다. 설계된 아날로그 회로는 성능 테스트를 위해 메모리 블록을 포함하고 있으며, 태그의 인식률과 경제성을 위해 저 전력 및 칩 면적의 최소화에 중점을 두고 설계하였다. 설계된 UHF 대역 RFID 태그용 아날로그 회로는 0.24Vpeak의 RF 입력으로 동작이 가능하며, 칩 면적은 $552.5{\mu}m{\times}338.8{\mu}m$, UHF 대역 RFID 태그 칩에 적합한 작은 면적을 갖는다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.713-718
• /
• 2013

In this paper, additional data transmission scheme was proposed based on SSB-OFDM Communication system which was know as efficient technique for bandwidth, because it used only single side band instead of double side band. When sending additional data which should be well spreaded for low power characteristics and error robustness. Gold code was selected for spreading code because it has excellent low-cross correlation characteristics. Through computer simulation, the validity was proved that proposed system is well worked with SSB-OFDM system.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.10
• /
• pp.12-21
• /
• 1998

A chaotic spread spectrum communication system using a polar quarternary method is designed and implemented. Four different chaotic signals in the relation of multiplication each other are generated through the use of a coupled synchronization method in the transmitter which is composed of four Chua's circuits. Information is retrieved at the receiver which is connected to the transmitter through the use of a drive synchronization method. Since spread spectrum of information signal is spread by chaotic signal, the configuration of the system is simpler than that of any other conventional system.

• Journal of Digital Contents Society
• /
• v.7 no.3
• /
• pp.147-151
• /
• 2006

In recent years, the Internation Standard ISO/IEC 18000-6 is announced and a new scheme of Type C is added to conventional standard. Among the RFID systems the ISO/IEC 18000-6 standard is the most interesting to companies due to its potential market growth. The operating frequency is between 860-960 MHz, and three kinds of RFID system are included in the standard, i.e. type A, B and C. In this paper, we implemented the data frame of type C with baseband coding using VHDL. The data frame is encoded based on Miller code and FM0. We showed the implementation results with waveforms. The data frame was proved that it is properly implemented by the experiment of transmission and receiving operation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.777-784
• /
• 2004

In this paper, a new filter structure to improve frequency response characteristics in decimation filter using CIC(Cascaded Integrator-Comb) filters and half band filters is proposed. Conventional filters improve only passband characteristics, but we propose a new filter which can improve stop band and pass band characteristics simultaneously. Since proposed filter needs only two multiplication, additional implementation cost is not much. And overall linear phase characteristics are maintained since the proposed filter is also linear phase. Finally, filter coefficients quantization effects ate discussed after Verilog-HDL coding.