• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.7
• /
• pp.352-357
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC - 39vol.% TiB$_2$ and using 61vo1.% SiC - 39vo1.% WC powders with the liquid forming additives of 12wt% $Al_2$O$_3$＋Y$_2$O$_3$ by pressureless annealing at 180$0^{\circ}C$ for 4 hours. Reactions between SiC and transition metal TiB$_2$, WC were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H), TiB$_2$ and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phase on the SiC-TiB$_2$, and SiC(2H), WC and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phase on the SiC-WC composites. $\beta$\$\longrightarrow$$\alpha$-SiC phase transformation was ocurred on the SiC-TiB$_2$, but $\alpha$\$\longrightarrow$$\beta$-SiC reverse transformation was not occurred on the SiC-WC composites. The relative density, the vicker's hardness, the flexural strength and the fracture toughness showed respectively value of 96.2%, 13.34GPa, 310.19Mpa and 5.53Mpaㆍml/2 in SiC-WC composites. The electrical resistivity of the SiC-TiB$_2$ and the SiC-WC composites is all positive temperature coefficient resistance(PTCR) in the temperature ranges from $25^{\circ}C$ to 50$0^{\circ}C$. 2.64${\times}$10-2/$^{\circ}C$ of PTCR of SiC-WC was higher than 1.645${\times}$10-3/$^{\circ}C$ of SiC-TiB$_2$ composites.posites.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.2
• /
• pp.75-80
• /
• 2014

Nanocrystalline diamond(NCD) films on steel(SKH51) has been investigated using SiC interlayer film. SiC was deposited on SKH51 or Si wafer by RF magnetron sputter. NCD was deposited on SiC at $600^{\circ}C$ for 0.5~4 h employing microwave plasma CVD. Film morphology was observed by FESEM and FIB. Film adherence was examined by Rockwell C adhesion test. The growth rate of NCD on SiC/Si substrate was much higher than that on SiC/SKH51. During particle coalescence, NCD growth rate was slow since overall rate was determined by the diffusion of carbon on SiC surface. After completion of particle coalescence, NCD growth became faster with the reaction of carbon on NCD film controlling the whole process. In the case of SiC/SKH51 substrate, a complete NCD film was not formed even after 4 h of deposition. The adhesion test of NCD/SiC/SKH51 samples revealed a delamination of film whereas that of SiC/SKH51 showed a good adhesion. Many voids of less than 0.1 ${\mu}m$ were detected on NCD/SiC interface. These voids were believed as the reason for the poor adhesion between NCD and SiC films. The origin of voids was due to the insufficient coalescence of diamond particles on SiC surface in the early stage of deposition.

• YAKHAK HOEJI
• /
• v.50 no.6
• /
• pp.421-428
• /
• 2006

Water extracts, ethanol extracts, and juice of Cusuta japonica, C, australis, and C. chinensis were prepared, and their cytotoxicity, antioxidant activity and inhibitory effects on tyrosinase activitiy and melanin biosynthesis were estimated by using melanoma Clone M-3. From this study; the following conclusions were attained. Extracts of Cuscuta japonica, C. australis, and C. chinensis showed noticeable cytotoxicity except ethanol extracts from the stem of C. australis. A maximual cytotoxicity was observed with tile ethanol extract from the seed of C, australis (87.39%). While the ethanol extract from the seed of C. japonica (91.88%) showed the most pronounced inhibitory effect on melanin biosynthesis, the water extract from the stem of C. japonica (1.05%) possessed very little inhibitory effect. The most inhibitory effect on tyrosinase activity was observed with the water extract from the stem of C. australis (76.67%). Howeverr the water extract from the stem of C. japonica showed a very poor effect on the inhibition of tyrosinase activity All the preparations, except extracts from the seed of C. australis were able to remove reactive oxygen species (ROS) in a dose-dependent manner. The juice of C. japonica demonstrated the strongest activity (59.02%).

• Asia-Pacific Journal of Business
• /
• v.13 no.4
• /
• pp.61-77
• /
• 2022

Purpose - The purpose of this study was to explore the relationship between C2C logistics service quality(convenience, responsiveness, reliability, information and empathy) customer satisfaction and customer loyalty. Design/methodology/approach - This study collected 252 survey data from consumers who use C2C platform in China. Then using SPSS 24.0 in order to analyze the data. This study used SPSS 24.0 to perform empirical analysis with 252 people who use C2C platform in China. Findings - First, it was confirmed that the quality of logistics service(convenience, responsiveness, reliability, information and empathy) had a positive effect on customer satisfaction. Second, logistics service quality(convenience, responsiveness, reliability, information and empathy) positively affects the customer loyalty. Third, there is also a strong relationship between customer satisfaction and customer loyalty. Research implications or Originality - It is well known that logistics is an important part of e-commerce. Research on the influence of B2B logistics service quality on customer satisfaction and customer loyalty is more currently, but research on C2C is relatively less. Our study contributes the related research area by doing empirical analysis of the relationship between the logistics service quality and customer satisfaction and customer loyalty to provide development suggestions for C2C sellers.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.6
• /
• pp.493-498
• /
• 2008

This Paper describes the Raman scattering characteristics of polycrystalline (Poly) 3C-SiC thin films, in which they were deposited on AlN buffer layer by APCVD using hexamethyldisilane (MHDS) and carrier gases (Ar+$H_2$). When the Raman spectra of SiC films deposited on the AlN layer of before and after annealing were worked according to growth temperature, D and G bands of graphite were measured. It can be explained that poly 3C-SiC films admixe with nanoparticle graphite and its C/Si rate is higher than ($C/Si\;{\approx}\;3$) that of the conventional SiC, which has no D and G bands related to graphite. From the Raman shifts of 3C-SiC films deposited at $1180^{\circ}C$ on the AlN layer of after annealing, the biaxial stress of poly 3C-SiC films was obtained as 896 MPa.

• The Korean Journal of Mycology
• /
• v.23 no.1 s.72
• /
• pp.92-104
• /
• 1995

Ten species of Cordyceps species were collected throughout Kangwon province including Chuncheon Dongsanmyun KNU forest experiment from June to September, 1993. Collected Cordyceps species were identified as Cordyceps militaris, C. roseostromata, C. kyushuensis, C. scarabaeicola, Phytocordyceps ninchukiospora, C. nutans, Paecilomyces tenuipes, C. sphecocephala, Hymenostilbe odonatae, Torrubiella sp.. C. militaris, type species of Cordyceps species, was mainly formed on pupae of Lepidoptera and found after the rainy season around July. Fruiting body of C. roseostromata was morphologically similar to those of C. militaris, but relatively small in size and they were also found on lawn or pupa of Lepidoptera. Fruiting body of C. scarabaeicola was found on adult Scarabaeidae specifically and collect fruiting bodies of C. kyushuensis were on larva of moth. C. nutans and C. sphecocephala had host specificity on Hemiptera and Hymenoptera, respectively. Each species formed elliptical fertile part attach to the slim and carneous stalk and they were collected the most in specimen number through whole season of the summer. Ascospore of Phytocordyceps ninchukiospora on seed was characterized by two viable, multiseptate, fusiform units linked end-to-end by a long, filiform connective. Paecilomyces tenuipes, imperfect stage of the genus Cordyceps is multi-infective fungi that attack all stages of all groups of insects. Hymenostilbe odonatae attacks only adult Odonata and Torrubiella sp. formed on spider was difficult to collect because it was found the back side of leaf. As results of cultural test PDA medium showed the best mycelial growth. In the experiment of effect of the acidity inside of the media, C. militaris was good on pH 5, C. nutans and Phytocordyceps ninchukiospora were good on pH 6 and Paecilomyces tenuipes was on pH 7 and C. scarabaeicola was on pH 9. All isolates tested showed the best mycelial growth at $20^{\circ}C$. Morphologically similar isolates were used to analyze protein banding pattern among and within species. As a result, C. militaris, C. roseostromata and C. kyushuensis were clustered into close species and C. scarabaeicola and Phytocordyceps ninchukiospora were relatively distant from those species.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.274-274
• /
• 2008

This paper describes on the fabrication and characteristics of a 3C-SiC (Silicon Carbide) micro pressure sensor for harsh environment applications. The implemented micro pressure sensor used 3C-SiC thin-films heteroepitaxially grown on SOI (Si-on-insulator) structures. This sensor takes advantages of the good mechanical properties of Si as diaphragms fabricated by D-RIE technology and temperature properties of 3C-SiC piezoresistors. The fabricated pressure sensors were tasted at temperature up to $250^{\circ}C$ and indicated a sensitivity of 0.46 mV/V*bar at room temperature and 0.28 mV/V*bar at $250^{\circ}C$. The fabricated 3C-SiC/SOI pressure sensor presents a high-sensitivity and excellent temperature stability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.273-273
• /
• 2008

This paper describes the frequency response of two-port surface acoustic wave (SAW) resonator made of 002-polycrystalline aluminum nitride (AlN) thin film on 111-poly 3C-SiC buffer layer. In there, Polycrystalline AlN thin films were deposited on polycrystalline 3C-SiC buffer layer by pulsed reactive magnetron sputtering system, the polycrystalline 3C-SiC was grown on $SiO_2$/Si sample by CVD. The obtained results such as the temperature coefficient of frequency (TCF) of the device is about from 15.9 to 18.5 ppm/$^{\circ}C$, the change in resonance frequency is approximately linear (30-$150^{\circ}C$), which resonance frequency of AlN/3C-SiC structure has high temperature stability. The characteristics of AlN thin films grown on 3C-SiC buffer layer are also evaluated by using the XRD, and AFM images.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1163-1169
• /
• 1996

The effects of borax on the phase formation of C2S, C4A3 and $\alpha$'-C2S phases. It has negative effects on formation of C4A3 And it lowers the forming temperature of C4AF. It also has been found that borax improves the clinkerization of MBC. In the MBC clinker with borax 3% C2S have larger and more irregular shapes, larger C/S mole ratio and C4A3 have smaller size larger C/ molr ratio than in the clinker without borax.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.385-386
• /
• 2008

This paper reports the design of the ultra low power consumption microhotplates for high temperatures. The microhotplates consisting of a platinum-based heating element on AlN/poly 3C-SiC layers were designed. The microhotplate is a $600\times600{\mu}m^2$ square shaped membrane made of $1{\mu}m$ thick ploy 3C-SiC suspended by four legs. The microhotplate was compared with $Si_3N_4/SiO_2/Si_3N_4$(NON) structure microhotplate by COMSOL simulation system. Thermal uniformity, power consumption and thermal characterizations of microhotplates based on 3C-SiC thin film are better than microhotplates with NON structure.