• 한국세라믹학회지
• /
• 제40권10호
• /
• pp.954-960
• /
• 2003

본 연구에서는 모바일 폰 안테나 모듈용 유전체 재료를 개발을 위해 20∼80의 유전율을 가지는 유리-세라믹스 복합체를 제조하고자 하였다. BaO-Nd$_2$O$_3$-TiO$_2$계 세라믹스에 $K_2$O-CaO-P$_2$O$_{5}$계 글래스 프릿의 첨가를 통해 제조된 글래스-세라믹스 복합체의 소결특성과 유전특성을 조사하였다. BaO-Nd$_2$O$_3$-TiO$_2$계 세라믹스에 글래스 프릿을 10∼40 wt% 범위로 첨가하였고, 900∼120$0^{\circ}C$의 온도범위에서 소결하였다. 그 결과로서, $K_2$O-CaO-P$_2$O$_{5}$계 글래스 프릿의 첨가량이 증가하고 소결온도가 증가할수록 소결수축률과 상대밀도가 증가하였다. 또한 유전율($\varepsilon$$_{r}$)과 품질계수(Q${\times}$f)는 감소하는 경향을 나타내었다.

• 수산해양기술연구
• /
• 제37권3호
• /
• pp.240-245
• /
• 2001

섬유함유율이 0%, 20% 그리고 30%인 단섬유 GF/PP 복합재료를 사용하여 8$0^{\circ}C$, 5$0^{\circ}C$ 그리고 실온에서 인장시험을 통하여 온도의 변화에 대한 파괴강도의 거동을 고찰한 결과는 다음과 같다. 1) 유리섬유로 강화하지 않은 순수 PP보다 유리섬유로 강화한 복합재료의 인장강도가 높게 나타났으며 섬유함유율이 증가할수록 그 값은 높게 나타났다. 2) 동일한 섬유함유율을 가지는 GF/PP 복합재료의 온도변화에 따른 인장강도는 실온의 경우가 가장 높게 나타나고 고온으로 갈수록 그 값이 낮게 나타났다. 3) GF/PP 복합재료의 파괴기구는 온도의 변화에 따라 매트릭스의 변형이 나타났으며 섬유의 풀아웃, 섬유와 매트릭스 사이의 디본딩을 관찰할 수 있었으며, 이와 같은 파괴기구가 종합적으로 상호작용한다고 생각된다.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.638-644
• /
• 2000

The sintering behaviors of the glass-alumina composites for low firing temperature were investigated as functiions of the volume fraction of alumina powder and the particle size with respect to porosity and pore shape. As the volume fraction of alumina powder was increased or the particle size of it was decreased, the sintering temperature of open pore-closing was raised. When the volume fractions of alumina which had 2.19$\mu\textrm{m}$ median diameter were increased with 20, 30, 40, and 50%, the sintering temperatures of open pore-closing were 425, 450, 475, and 500$^{\circ}C$. And when the median particle size of alumina was diminished from 2.19$\mu\textrm{m}$ to 0.38$\mu\textrm{m}$, the sintering temperature of open pore-closing was increased from 450$^{\circ}C$ to 475$^{\circ}C$. Especially, the sintering temperature, which showed maximum density, was corresponded with the stage of open pore-closing and after achieving maximum density over heating resulted in dedensification of specimen, so called, over-firing behavior.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.83-88
• /
• 2001

In this study, the tensile and compressive tests of glass fiber epoxy composites were performed to measure the strength variation with respect to strain rates of 1-200 $\textrm{sec}^{-1}$. In addition, tensile and compressive tests of 50-200 $\textrm{sec}^{-1}$ strain rates were conducted at a low temperature ($-60^{\circ}C$) to investigate the effects of temperature on the strength variation. From the test results, it was found that the tensile and compressive strengths increased about 100% and 70%, respectively, at the strain rates of 10-100 $\textrm{sec}^{-1}$ compared to the quasi-static strengths while the strengths were little affected by the environmental temperature variation.

• 동력기계공학회지
• /
• 제7권1호
• /
• pp.25-33
• /
• 2003

섬유강화 복합재료의 계면 강도는 강화재와 메트릭스간의 계면특성, 강화용 섬유의 표면처리 및 섬유간의 거리 등에 많은 영향을 받는다. 본 연구에서는 섬유간의 거리가 섬유강화 복합재료의 계면특성에 미치는 영향을 고찰하기 위해, E glass fiber/epoxy 복합재료의 시험편을 제작하고, 섬유의 표면처리 및 섬유파괴가 이웃하는 섬유파괴에 영향을 미치는 거리에 대해 고찰하였다. E glass fiber/epoxy 복합재료의 계면 전단강도는 섬유간 거리 $0{\sim}50{\mu}m$ 사이에서는 섬유의 표면처리와는 관계없이 섬유간 거리가 증가할수록 증가하였고, 섬유간 거리 $50{\mu}m$ 이상에서는 섬유간거리에 관계없이 계면전단강도는 일정하였다.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.115-118
• /
• 1999

Carbon composites with $MoSi_2$ dispersion were prepared by hot-pressing at $1700^{\circ}C$ under 30 MPa for 1 h using polysilazance as binding material. The composites consisted of C, $Mo_{4.8}Si_3C_{0.6}$ and SiC. Bulk density and porosity of the carbon composites with 10 vol% $MoSi_2$ was 1.8g.$\textrm{cm}^{-3}$ and 34%, respectively. This composite was oxidized about 0.05mm from the surface of the carbon composite after oxidation test at $1500^{\circ}C$ for 10h in air. Formation of the $SiO_2$ glass layer was observed by SEM. When this composite suffered damage in the coating layer, it had hardly farther oxidation because of its self-repairing property. The composite prepared in this study indicated good oxidation resistance.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.881-885
• /
• 2003

인공치관용 알루미나-유리 복합체를 in vitro 분위기인 $37^{\circ}C$) 인공타액 하에서 49N~196N의 하중조건 하에서 ball-on-disc 형태로 120rpm의 회전속도로 직경 14mm인 트랙을 $10^{6}$) 횟수까지 내마모거동을 조사하기 위하여 내마모실험을 수행하였다. 하중이 49N,98N 196N으로 증가함에 따라, 마찰계수는 0.025로 일정하였지만 마모율은 2.18${\times}$$10^{-9}$$mm^{3}$/N.m, 3.37${\times}$$10^{-9}$$mm^{3}$/N.m, 2.35${\times}$$10^{-6}$$mm^{3}$/N.m로 증가하였다. 실험결과, 알루미나-유리 복합체의 마모거동은 마모길리 44km까지 전형적인 흡착마모로 치열교정용 세라믹 브라켓으로 적합하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.284-284
• /
• 2007

In this study, the microwave dielectric property variations of (1-x)$BiNbO_4-(x)ZnNb_2O_6$ composites (x=0.3, 0.5 and 0.7) with 10wt% zinc borosilicate(ZBS) glass was investigated as a function of the substitution of $ZnNb_2O_6$ with a view to applying thes system to LTCC technology. The all composition addition of 10wt% ZBS glass ensured a successful sintering below $900^{\circ}C$. In addition, a small amount of $Bi_2SiO_5$ as the secondary phase was observed in the all composition. The substitution of $ZnNb_2O_6$ on the $BiNbO_4$ composites increased the $Q{\times}f$ values, but it decreased the sinterability and dielectric constant due to the high sintering temperature and low dielectric constant of $ZnNb_2O_6\;than\;BiNbO_4$ ceramics. The increasing of $ZnNb_2O_6$ content from 0.3 to 0.7 in the (1-x)$BiNbO_4-(x)ZnNb_2O_6$ composites with 10wt% ZBS glass sintered at $900^{\circ}C$ demonstrated 28.1~15.6 in the dielectric constant$({\varepsilon}_r)$, 5,500~8,700GHz in the $Q{\times}f$ value.

• Advances in materials Research
• /
• 제5권2호
• /
• pp.121-130
• /
• 2016

In an attempt to reach a balance of performances in homo-polypropylene based system, the effects of single and hybrid reinforcements inclusions comprising calcium carbonate nanoparticles (2, 4 and 6 phc) and glass fibers (10 wt.%) on the mechanical and thermal properties were investigated. Different samples were prepared by employing twin-screw extruder and injection molding machine. In morphological studies, the uniform distribution of glass fibers in PP matrix, relative adhesion between glass fibers and polymer, and existence of nanoparticles in polymer matrix were observed. $PP/CaCO_3$ (6 phc) as compared to pure PP and PP/GF had superior tensile and flexural strengths, impact resistance and deformation temperature under load (DTUL). $PP/GF/CaCO_3$ (6 phc) composite displayed comparable tensile and flexural strengths and impact resistance to neat PP, while its tensile and flexural moduli and deformation temperature under load (DTUL) were 436%, 99% and $26^{\circ}C$greater respectively. The maximum impact resistance was observed in $PP/CaCO_3$(6 phc). The highest DTUL was perceived in PP hybrid nanocomposite containing 10 wt.% glass fiber and 4 phc $CaCO_3$ nanoparticle.

• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.388-394
• /
• 2004

Composites of Si$_3$N$_4$-SiC containing up to 30 wt% of dispersed SiC particles were fabricated via hot-pressing with an oxynitride glass. To determine the effect of sintering time and SiC content on the mechanical properties and the cutting performance, the composites with fixed 8hr-sintering time and 20 wt% SiC content were fabricated and tested. Fracture toughness of the composites increased with increasing sintering time, while the hardness increased as the SiC content increased up to 20 wt%. The hardness of the composites was relatively independent of the grain size and the sintered density. For machining heat-treated AISI4140, the insert with 20 wt% SiC sintered for 8hr showed the longest tool life while the insert with 20 wt% SiC sintered for 12hr showed the longest tool life for machining gray cast iron. An effort was made to relate the mechanical properties, such as hardness, fracture toughness and wear resistance coefficient with the tool life. However, no apparent relationship was found between them. It may be stated that tool life is affected by not only the mechanical properties but also other properties such as surface roughness, density, grian size and the number of the inherent defects in the inserts.