• Journal of The Korean Association of Information Education
• /
• v.9 no.1
• /
• pp.49-55
• /
• 2005

Web-Based instruction system embodied according to traditional process until present. But, these method have inefficiency in system development and give trouble of operation and administration after development. Therefore, It need induction of component based development in Web-Based instruction system. In this research, I constructed score processing system by component composition. I embodied component by Java Beans and used C2 architecture at the composition method. In this result, I shown in application possibility of component based development in Web-Based instruction system as to construct whole score processing system through composition of each component.

• Structural Engineering and Mechanics
• /
• v.54 no.2
• /
• pp.379-392
• /
• 2015

A number of acceleration-based damage detection methods have been developed but they have not been widely applied in engineering practices because the acceleration response is insensitive to minor damage of civil structures. In this article, a damage detection approach using the long-gauge strain sensing technology and the principle component analysis technology is proposed. The Long gauge FBG sensor has its special merit for damage detection by measuring the averaged strain over a long-gauge length, and it can be connected each other to make a distributed sensor network for monitoring the large-scale civil infrastructure. A new damage index is defined by performing the principle component analyses of the long-gauge strains measured from the intact and damaged structures respectively. Advantages of the long gauge sensing and the principle component analysis technologies guarantee the effectiveness for structural damage localization. Examples of a simple supported beam and a steel stringer bridge have been investigated to illustrate the successful applications of the proposed method for structural damage detection.

• Analytical Science and Technology
• /
• v.32 no.4
• /
• pp.131-138
• /
• 2019

This paper reports results on the physical properties of a powder type of $Al_2O_3:C$ commonly used as a luminescence dosimeter using the LM-OSL technique. On the analysis with the general order kinetics model, the LM-OSL signal measured appeared to be composed of three components (fast, medium, slow) showing the largest area in the medium component. The photoionization cross sections of three components were distributed between $10^{-19}{\sim}10^{-21}cm^2$. The values of the thermal assistance energy were evaluated the largest in slow component and the smallest in fast component, which indicates the electrons trapped in defects attributed to slow component should be the most sensitive to thermal vibration among three components. In illumination to blue light, the fast component showed a rapid linear decay and completely disappeared after light exposure time of about 5 s. The medium component decayed with two exponential elements but the slow component did not observed any noticeable change until light exposure time of 40 s. In a dose response study, all components exhibited a linear behaviour up to approximately 10 Gy.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2007.07a
• /
• pp.129-137
• /
• 2007

This paper presents a numerical model which can predict degree of hydration of cement mineral component, such as $C_{3}S$, $C_{2}S$, $C_{3}A$, $C_{4}AF$ and microstructure of hydrating cement as a function of water to cement ratio, cement particle size distribution, cement mineral components and temperature. In this model cement particles are parked randomly in cell space and hydration process is described using a multi-component integrated kinetic model. The simulation result of degree of hydration of cement mineral component agrees well with experiment result. The content of cement hydration product, such as CSH and CH can be obtained as an accompanied result during hydration process. By introducing of equal-area projection method, water withdrawl mechanism and contact area among cement particles can be considered in detail. By using proposed method, pore size distribution of hydrating cement is predicted.

• Cement Symposium
• /
• s.34
• /
• pp.129-137
• /
• 2007

This paper presents a numerical model which can predict degree of cement mineral component, such as $C_3S$, $C_2S$, $C_3A$, $C_4AF$ and microstructure of hydrating cement as a function of water to cement ratio, cement particle size distribution, cement mineral components and temperature. In this model cement particles are parked randomly in cell space and hydration process is described using a multi-component intergrated kinetic model. The simulation result of degree of hydration of cement mineral component agrees well with experiment result. The content of cement hydration product, such as CSH and CH can be obtained as an accompanied result during hydration process. By introducing of equal-area projection method, water withdrawl mechanism and contact area among cement particles can be considered in detail. By using proposed method, pore size distribution of hydrating cement is predicted.

• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1135-1148
• /
• 2003

A commercial-off-the-shelf (COTS) component is an implementation of common functionality among family members, where an in-house component implements an organization-specific functionality. Typically, a COTS component has a producer and aset of potential consumers. Consumers evaluate COTS components thoroughly before they purchase, because these components are developed by third party producers and most consumers have ‘not-invented-here’ syndrome. Hence, evaluating the quality of COTS components becomes an important prerequisite to a successful component-based application development. In this paper, we identify the characteristics of COTS components, and derive a practical quality model for components, C-QM, which consists of quality factors, criteria and metrics and a qualify certification system, C-QCS. The top design goal of C-QM is set to provide a practically applicable comprehensive quality model which can be effectively applied in assessing the various quality aspects of COTS components.

• The Journal of Korean Medicine
• /
• v.29 no.4
• /
• pp.55-67
• /
• 2008

Objectives: The purpose of this study was to investigate the effect of Hwangryunhaedok-tang, its major component Coptidis Rhizoma, and the major component of Coptidis Rhizoma, berberine, on the expression of behavioral sensitization induced by the repeated administration of nicotine. Methods: Experimental ratswere divided into 3 groups and each group treated with saline, nicotine, and Hwangryunhaedok-tang. Experiments were performed on 4 further groups, each group treated with saline, nicotine, Coptidis Rhizoma, and berberine. To obtain rats addicted todrugs, nicotine was injected repeatedly. After 3 days of withdrawal phase, on the 11th day, rats were re-exposed to nicotine and thus able to induce the expression of the activity sensitization phenomenon successfully. To examine the change of c-Fos in the brain of experimental rats with the nicotine-induced activity sensitization, their neurological activation rate was assessed by c-Fos staining with Fos-like immunihistochemistry of the dopamine releasing area, the striatum and the nucleus accumbens. Results: The result demonstrate that Hwangryunhaedok-tang, its major component Coptidis Rhizoma and berberine,the major component of Coptidis Rhizoma, significantly reduced the walking activity rate in the drug addict models induced by nicotine administration, and Coptidis Rhizoma and its major component berberine reduce the marker of the neurological activation c-Fos, and thus revealed an effect of suppressing drug addiction. Conclusions: These results suggest the possibility of Hwangryunhaedok-tang, its major component Coptidis Rhizoma and the major component of Coptidis Rhizoma, berberine,as therapeutic for nicotine addiction.

• Korean Journal of Microbiology
• /
• v.25 no.4
• /
• pp.293-303
• /
• 1987

A $C_{1}$ enriched cellulase fraction was separated from culture filtrate of anaerobic Clostridium thermocellum by hydroxyapatite column chromatography. The separated fraction showed strong synergistic action with $C_{x}$ component (endo-$\beta$-1, 4-glucanase) in digestion of crystalline cellulose, similar to the other aerobic cellulolytic microorganisms. Unlike the $C_{x}$ component the $C_{1}$ enriched fraction was rapidly inactivated by oxidation at the atmospheric condition. The enzyme activity was significantly enhanced by the addition of reducing agents, especially $\beta$-mercaptoethanol, which indicates that a $C_{1}$ component has a lot of sulfhydryl groups essential for the enzyme activity. The effect of metal ions on $C_{1}$ activity was also investigated. The $C_{1}$ fraction was found to be thermally stable compare to endo-$\beta$-1,4-glucanase. Optimal temperature and pH were found to be $60^{\circ}C$ and 6.0, respectively.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.2
• /
• pp.31-39
• /
• 2019

Cracked component analysis is needed for structural integrity analysis under seismic loading. Under large amplitude cyclic loading conditions, the change in material properties can be complex, depending on the magnitude of plastic strain. Therefore the cracked component analysis under cyclic loading should consider appropriate cyclic hardening model. This study introduces a procedure for determining an appropriate cyclic hardening model for cracked component analysis. The test material was nuclear-grade TP316 stainless steel. The material cyclic hardening was simulated using the Chaboche combined hardening model. The kinematic hardening model was determined from standard tensile test to cover the high and wide strain range. The isotropic hardening model was determined by simulating C(T) test under cyclic loading using ABAQUS debonding analysis. The suitability of the material hardening model was verified by comparing load-displacement curves of cyclic C(T) tests under different load ratios.

• Journal of the Korean Home Economics Association
• /
• v.36 no.12
• /
• pp.43-54
• /
• 1998

From the viewpoint of clothing construction, it is necessary to grasp exactly the shapes of the neck and the shouder, such as the line of the neck base, the neck gradient, the shoulder gradient, the shape of the scapular, and the shape of the breast. In this report, factor analysis was applied to 39 items of neck & shoulder level measurements, including stature, weight, but grith, waist girth, to demonstrate the most relevant measurements for collar and bodice pattern designing, and to classify the neck and shoulder level shapes. The subjects investigated were 126 women of the age 20-29. The main results are follows : 1. For factors of body form were extracted by the factor analysis. The 1st principal component can be interpreted as "size" component, the 2nd-3th principal component is "shape" component relating to neck and shoulder level, and the 4th principal component is "shoulder shape" component. 2. With regard to factor loadings, we were able to extract the most relevant measurements for collar and bodice pattern designing. M16, M22, S26, S30, S34, S35, S36, C37, C38, C39.