• 정보교육학회논문지
• /
• 제9권1호
• /
• pp.49-55
• /
• 2005

웹 기반 학습시스템은 현재까지 전통적인 프로세스에 따라 구현되었다. 그러나 이러한 방법은 시스템 개발에서 비효율성을 갖으며, 개발이후에도 운영 및 관리에 어려움을 준다. 따라서 웹 기반 교육시스템에서도 컴포넌트 기반 개발방법의 도입이 필요하다. 본 연구에서는 컴포넌트 합성에 의한 성적처리 시스템을 구축하였다. 컴포넌트는 Java Beans로 구현하였으며, 합성 방법은 C2 아키텍처를 이용하였다. 이는, 각 컴포넌트의 합성을 통하여 전체 성적처리 시스템을 구축함으로서 웹 기반 학습 시스템에서도 컴포넌트 기반 개발방법의 적용 가능성을 보였다.

• Structural Engineering and Mechanics
• /
• 제54권2호
• /
• pp.379-392
• /
• 2015

A number of acceleration-based damage detection methods have been developed but they have not been widely applied in engineering practices because the acceleration response is insensitive to minor damage of civil structures. In this article, a damage detection approach using the long-gauge strain sensing technology and the principle component analysis technology is proposed. The Long gauge FBG sensor has its special merit for damage detection by measuring the averaged strain over a long-gauge length, and it can be connected each other to make a distributed sensor network for monitoring the large-scale civil infrastructure. A new damage index is defined by performing the principle component analyses of the long-gauge strains measured from the intact and damaged structures respectively. Advantages of the long gauge sensing and the principle component analysis technologies guarantee the effectiveness for structural damage localization. Examples of a simple supported beam and a steel stringer bridge have been investigated to illustrate the successful applications of the proposed method for structural damage detection.

• 분석과학
• /
• 제32권4호
• /
• pp.131-138
• /
• 2019

This paper reports results on the physical properties of a powder type of $Al_2O_3:C$ commonly used as a luminescence dosimeter using the LM-OSL technique. On the analysis with the general order kinetics model, the LM-OSL signal measured appeared to be composed of three components (fast, medium, slow) showing the largest area in the medium component. The photoionization cross sections of three components were distributed between $10^{-19}{\sim}10^{-21}cm^2$. The values of the thermal assistance energy were evaluated the largest in slow component and the smallest in fast component, which indicates the electrons trapped in defects attributed to slow component should be the most sensitive to thermal vibration among three components. In illumination to blue light, the fast component showed a rapid linear decay and completely disappeared after light exposure time of about 5 s. The medium component decayed with two exponential elements but the slow component did not observed any noticeable change until light exposure time of 40 s. In a dose response study, all components exhibited a linear behaviour up to approximately 10 Gy.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2007년도 제34회 시멘트 심포지엄
• /
• pp.129-137
• /
• 2007

This paper presents a numerical model which can predict degree of hydration of cement mineral component, such as $C_{3}S$, $C_{2}S$, $C_{3}A$, $C_{4}AF$ and microstructure of hydrating cement as a function of water to cement ratio, cement particle size distribution, cement mineral components and temperature. In this model cement particles are parked randomly in cell space and hydration process is described using a multi-component integrated kinetic model. The simulation result of degree of hydration of cement mineral component agrees well with experiment result. The content of cement hydration product, such as CSH and CH can be obtained as an accompanied result during hydration process. By introducing of equal-area projection method, water withdrawl mechanism and contact area among cement particles can be considered in detail. By using proposed method, pore size distribution of hydrating cement is predicted.

• 시멘트 심포지엄
• /
• 통권34호
• /
• pp.129-137
• /
• 2007

This paper presents a numerical model which can predict degree of cement mineral component, such as $C_3S$, $C_2S$, $C_3A$, $C_4AF$ and microstructure of hydrating cement as a function of water to cement ratio, cement particle size distribution, cement mineral components and temperature. In this model cement particles are parked randomly in cell space and hydration process is described using a multi-component intergrated kinetic model. The simulation result of degree of hydration of cement mineral component agrees well with experiment result. The content of cement hydration product, such as CSH and CH can be obtained as an accompanied result during hydration process. By introducing of equal-area projection method, water withdrawl mechanism and contact area among cement particles can be considered in detail. By using proposed method, pore size distribution of hydrating cement is predicted.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권12호
• /
• pp.1135-1148
• /
• 2003

CBD (Component-Based Development)에서 특정 조직이 가지는 기능성들을 구현하는 In-house 컴포넌트와는 달리 COTS (Commercial-Off-The-Shelf) 컴포넌트는 패밀리 멤버들 사이의 공통된 기능을 구현하게 된다. 일반적으로 COTS 컴포넌트에는 컴포넌트 제조자와 이를 소비하기 위한 다수의 잠재적인 구매자들이 존재하게 된다. 구매자들은 Third-Party 제조자들에 의해 개발된 컴포넌트에 대하여 ‘Not-Invented-Here’ 신드롬을 가지고 있기 때문에 구매하기 이전에 COTS 컴포넌트에 대한 철저한 평가를 하게된다. 따라서, COTS 컴포넌트에 대한 품질 평가는 매우 중요하며 컴포넌트 기반 어플리케이션 개발에 있어서의 성공 여부에 대한 중요한 요소이다. 본논문에서는 COTS 컴포넌트의 특징을 파악하고 품질 요소, 품질 항목 및 품질 메트릭 등으로 이루어진 컴포넌트를 위한 품질 모델인 C-QM을 이용한 품질 인증 시스템인 C-QCS를 제안한다. 품질 모델을통해 COTS 컴포넌트의 여러 가지 품질 측면을 고려하여 품질 평가 및 인증에 더욱 효율적으로 적용시킬 수 있도록 한다.

• 대한한의학회지
• /
• 제29권4호
• /
• pp.55-67
• /
• 2008

Objectives: The purpose of this study was to investigate the effect of Hwangryunhaedok-tang, its major component Coptidis Rhizoma, and the major component of Coptidis Rhizoma, berberine, on the expression of behavioral sensitization induced by the repeated administration of nicotine. Methods: Experimental ratswere divided into 3 groups and each group treated with saline, nicotine, and Hwangryunhaedok-tang. Experiments were performed on 4 further groups, each group treated with saline, nicotine, Coptidis Rhizoma, and berberine. To obtain rats addicted todrugs, nicotine was injected repeatedly. After 3 days of withdrawal phase, on the 11th day, rats were re-exposed to nicotine and thus able to induce the expression of the activity sensitization phenomenon successfully. To examine the change of c-Fos in the brain of experimental rats with the nicotine-induced activity sensitization, their neurological activation rate was assessed by c-Fos staining with Fos-like immunihistochemistry of the dopamine releasing area, the striatum and the nucleus accumbens. Results: The result demonstrate that Hwangryunhaedok-tang, its major component Coptidis Rhizoma and berberine,the major component of Coptidis Rhizoma, significantly reduced the walking activity rate in the drug addict models induced by nicotine administration, and Coptidis Rhizoma and its major component berberine reduce the marker of the neurological activation c-Fos, and thus revealed an effect of suppressing drug addiction. Conclusions: These results suggest the possibility of Hwangryunhaedok-tang, its major component Coptidis Rhizoma and the major component of Coptidis Rhizoma, berberine,as therapeutic for nicotine addiction.

• 미생물학회지
• /
• 제25권4호
• /
• pp.293-303
• /
• 1987

혐기성 Clostrium therrnocellurn의 배양액으로부터 hydroxyapatite column chromatography를 통하여 cellulase complex중의 $C_{1}$ enriched fraction을 분리하였다. 다은 호기성 미생물과 마찬가지로 분리된 $C_{x}$, fraction과 다른 $C_{x}$ 성분과의 synergism에 의해 볼용성 성유소의 분해가 현저히 촉진되였다. $C_{x}$ 성분과는 달리 $C_{1}$, fraction은 공기중에서 산화에 의해 잘 실활되었으나 환원제, 특히 $\beta$-mercaptoethanol에 의해 효소 환성이 강하게 증가되는 것으로 보아 $C_{1}$ component는 다량의 sulfhydryl grou을 가지고 있는 것으로 판단되었다. 이 fraction은 열에 매우 안정하였으며 최적 온도와 pH는 각각 $60^{\circ}C$와 6.0 이었다.

• 한국압력기기공학회 논문집
• /
• 제15권2호
• /
• pp.31-39
• /
• 2019

Cracked component analysis is needed for structural integrity analysis under seismic loading. Under large amplitude cyclic loading conditions, the change in material properties can be complex, depending on the magnitude of plastic strain. Therefore the cracked component analysis under cyclic loading should consider appropriate cyclic hardening model. This study introduces a procedure for determining an appropriate cyclic hardening model for cracked component analysis. The test material was nuclear-grade TP316 stainless steel. The material cyclic hardening was simulated using the Chaboche combined hardening model. The kinematic hardening model was determined from standard tensile test to cover the high and wide strain range. The isotropic hardening model was determined by simulating C(T) test under cyclic loading using ABAQUS debonding analysis. The suitability of the material hardening model was verified by comparing load-displacement curves of cyclic C(T) tests under different load ratios.

• 대한가정학회지
• /
• 제36권12호
• /
• pp.43-54
• /
• 1998

From the viewpoint of clothing construction, it is necessary to grasp exactly the shapes of the neck and the shouder, such as the line of the neck base, the neck gradient, the shoulder gradient, the shape of the scapular, and the shape of the breast. In this report, factor analysis was applied to 39 items of neck & shoulder level measurements, including stature, weight, but grith, waist girth, to demonstrate the most relevant measurements for collar and bodice pattern designing, and to classify the neck and shoulder level shapes. The subjects investigated were 126 women of the age 20-29. The main results are follows : 1. For factors of body form were extracted by the factor analysis. The 1st principal component can be interpreted as "size" component, the 2nd-3th principal component is "shape" component relating to neck and shoulder level, and the 4th principal component is "shoulder shape" component. 2. With regard to factor loadings, we were able to extract the most relevant measurements for collar and bodice pattern designing. M16, M22, S26, S30, S34, S35, S36, C37, C38, C39.