• 제목/요약/키워드: Bypass Line

검색결과 69건 처리시간 0.028초

충전/안전주입 펌프 순환배관의 안전주입신호 제거에 따른 원자력 5,6,7,8 호기의 고압안전주입계통의 신뢰도 분석 (A Reliability Analysis of HHSIS of KNU 5,6,7 and 8 Following the Removal of s-signal from Charging/safety Injection Pump Mini-flow Line Valves)

  • Chung, Dae-Wook;Chung, Chang-Hyun;Kang, Chang-Soon
    • Nuclear Engineering and Technology
    • /
    • 제20권1호
    • /
    • pp.47-53
    • /
    • 1988
  • 본 연구의 목적은 충전/안전주입 펌프 최소순환관으로부터 안전주입신호(s-신호)를제거 함에 따른 원자력 5,6,7,8호기의 고압안전주입계통(HHSIS)의 신뢰도를 분석, 평가하는 것이다. 계산은 s-신호를 제거한 경우와 제거하지 않은 경우에 대하여 각각 수행되었다. 각 경우에 대하여 s-신호 발생시 고압안전주입계통의 이용불능도와 충전/안전주입 펌프의 파손확률이 계산되었다. 계산결과에 따르면, s-신호를 제거함에 따라 고압안전주입계통의 이용불능도는 미세하게 증가하였으며 반면에 충전/안전주입 펌프의 파손확률은 크게 감소하였다. 따라서 여러가지 측면에서 충전/안전주입 펌프의 최소순환관으로부터 s-신호를 제거하고 운전하는 것이 합당하다는 것이 밝혀졌으며, 고압안전주입계통의 이용불능도를 줄이기 위하여 운전절차를 개선하고 운전원의 훈련 및 교육을 강화할 것을 추천한다.

  • PDF

개심술 후 저류공기의 효과적인 제거를 위한 동정맥도관의 설치 (Arterio-Venous Line Connection for Effective Intracardiac Deairing after Open Heart Surgery)

  • 정성운;김종원;박준호
    • Journal of Chest Surgery
    • /
    • 제36권11호
    • /
    • pp.834-838
    • /
    • 2003
  • 배경: 개심술 후 공기 제거는 매우 중요한 시술이다. 그러나, 심장 내의 공기 분포, 시술로 인한 합병증, 심폐바이패스의 시간 연장으로 여전히 제한적이다. 인위적으로 동정맥루를 만들어 공기를 제거하고 그 효과를 경식도초음파로 확인하였다. 대상 및 방법: 심폐바이패스 완료 직전에 압력표준변환선을 동맥과 정맥회로에 설치해둔 마개에 연결하면 동맥과 정맥사이에 작은 동정맥루가 형성된다. 심장 내의 공기정도와 공기제거시간은 경식도 초음파와 압력표준변환선으로 확인하였다. 결과: 간단한 방법으로 심폐바이패스의 시간단축, 수분 내에 공기가 제거되는 것을 경식도초음파로 확인하였다. 결론: 동맥과 정맥 사이에 작은 연결관으로 동정 맥루를 만드는 것은 매우 간단하며 개심술 후 공기 제거와 공기색전증 예방에 효과적인 방법이다.

가동원전 잔열제거계통 배관에서의 열성층유동 해석 (An Analysis on Thermal Stratification in Residual Heat Removal System Piping of Nuclear Power Plant)

  • 박만홍;김광추;김경훈
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.1597-1602
    • /
    • 2003
  • Numerical analysis is carried out to assess the temperature distribution on the mixing tee line of Residual Heat Removal System (RHRS). In RHRS, hot and cold fluids of main and bypass piping are mixed and unmixed by the flow rate or piping layout. Thermal stratification phenomenon is a cause of major degradation on RHRS piping. According to the analysis for each operation modes, maximum temperature difference between top and bottom of piping were evaluated about 60K when the flow rate of main and bypass lines is same. Temperature difference will be decreased at the elbow on RHRS piping if the length of vertical piping is increased.

  • PDF

GTO강제 전류를 병용한 타려식 인버터의 PWM제어 (PWM Control of Line Commutated Inverter With GTO Forced Commutation)

  • 정연택;성세진;심재명
    • 대한전기학회논문지
    • /
    • 제38권8호
    • /
    • pp.610-616
    • /
    • 1989
  • The line commutated inverter with GTO forced commutation is described in this paper. The presented circuit has one bypass GTO inserted in DC power side line commutated thyristor inverter. The extended commutation region with additional one GTO-commutation is clearly shown. Also, a new PWM pattern is presented to decrease the effects of harmonics for commutation. A criterion for designing the AC filter parameters to decrease harmonics of AC part is given. The simulation and experimental results clearly show that the proposed circuit can be adapted in the application of regeneration.

  • PDF

전원전류(電源轉流)와 소자전류(素子轉流)를 병용한 PWM 인버터 (PWM INVERTER UTILIZING LINE AND DEVICE COMMUTATIONS)

  • 심재병;성세진;정연택
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
    • /
    • pp.130-132
    • /
    • 1988
  • A usual line-commutated thyristor inverter with additional onebypass GTO is presented. With the added one bypass GTO, the extended commutating area is investigation and restrictions for the PWM to reduce the high frequency component of line current are shown.

  • PDF

우수한 차단 특성을 갖는 ITS용 SIR 대역 통과 여파기 (A Stepped Impedance Resonator Bandpass Filter with Superior Cut-off Response for ITS Application)

  • 남희;윤태순;이명길;이종철;홍의석
    • 한국ITS학회 논문지
    • /
    • 제4권3호
    • /
    • pp.73-78
    • /
    • 2005
  • 본 논문에서는 상호 캐패시터 (Bypass coupling Capacitor)를 이용하여 Transmission Zero를 구현함으로써 우수한 차단 응답 특성을 보이며, 또한 IDC (Interdigital Capacitor)을 사용함으로써 더욱 향상된 고조파 특성을 갖는 대역 통과 여파기를 설계 및 구현하였다. 지능형 교통시스템에 사용되고 있는 5.85 GHz의 중심 주파수에서 3 %의 대역폭을 갖도록 설계된 SIR (Stepped Impedance Resonator) 대역 통과 여파기는 1.8 dB의 삽입 손실과 20 dB의 반사 손실 특성을 갖도록 설계 되었으며, 제작된 대역 통과 여파기는 대역폭이 4.2 %로 1.9 dB의 삽입 손실과 15.4 dB의 반사 손실을 측정 결과에서 나타내었다.

  • PDF

천연가스배관 내 피그흐름의 속도제어 (Speed Control of PIG Flow in Natural Gas Pipeline)

  • 쿠엔탄티엔;김동규;노용우;김상봉
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집B
    • /
    • pp.253-258
    • /
    • 2001
  • This paper introduces a simple nonlinear adaptive control method for pipeline inspection gauge (PIG) flow in natural gas pipeline. The dynamic behavior of the PIG depends on the different pressure across its body and the bypass flow through it. The system dynamics includes: dynamics of driving gas flow behind the PIG, dynamics of expelled gas in front of the PIG, and dynamics of the PIG. The method of characteristics (MOC) and Runger-Kuta method are used to solve the dynamics of flow. The PIG velocity is controlled through the amount of bypass flow across its body. A simple nonlinear adaptive controller based on the backstepping method is introduced. To derive the controller, three system parameters should be measured: the PIG position, its velocity and the velocity of bypass flow across the PIG body. The simulation has been done with a pipeline segment in the KOGAS low pressure system, Ueijungboo-Sangye line to verify the effectiveness of the proposed controller. Three cases of interest are considered: the PIG starts to move at its launcher, the PIG arrives at its receiver and the PIG restarts after stopping in the pipeline by obstruction. The simulation results show that the proposed nonlinear adaptive controller attained good performance and can be used for controlling the PIG velocity.

  • PDF

전원 및 신호시스템에서의 뇌서지 전파양상 (Propagation Tendency of Lightning Surge in the Power and Communication System)

  • 이태형;조성철;엄주홍
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2007년도 춘계학술대회 논문집
    • /
    • pp.245-249
    • /
    • 2007
  • The tendency of lightning surge to propagate displays the difference for applicable power and equipment. However, looking into the subject equipment with the lightning surge, the lightning surge can be divided in between the two lines of power, between the power line and the ground, the power line and the PE conductor, between the neutral line and the ground and the like. In addition, in the event of the communication equipment, there exists the case of lightning surge entered from the power line in addition to the entry between the communication lines, the communication line and the ground. In this study, the tendency of propagation of lightning surge penetrated on to the subject equipment is analyzed through the empirical experiment in accordance with the ground method by using the independent ground, common ground, bypass arrester and others among the techniques for safety improvement in power lines.

  • PDF