• 패션비즈니스
• /
• 제5권4호
• /
• pp.144-157
• /
• 2001

The purpose of this study was to research on breast shape and size to suggest a brassiere sizing chart for elderly women. For this purpose 90 elderly women aged between 55 and 69 were sampled at random to review their breast types by age group, and thereby, suggest the basic measurements and production ratio of each brassiere size in reference to KS K 0070: 1999. The collected measurement data were processed statistically using the SPSS PC/WIN program for technical statistical analysis. The results of this study can be summarized as follows; 1. Analysis of Breast Measurements To find out difference among age groups, the 90 subjects were grouped into three(Group 1 ; aged 55 to 59, Group 2 ; aged 60 to 64, Group 3 ; aged 65 to 69). The results of the comparative analysis of anthropometric data from three groups show that getting older;- Various length measurements related to the drooping degree of breast were increased. It was found that the older group in their 65-69's had more drooping breasts than their 55-59's or 60-64's counterparts. Such findings suggests that older women's drooping can be corrected by a brassiere which serves to support the breasts. 2. Suggestions on a Brassiere Sizing For the basic measurements of brassiere parts for the elderly women, the correlation between underchest circumferences and cup sizes were analyzed. 3% or higher occurrences among the whole sample elderly women were included in the brassiere sizes. thus, the under-chest measurements were set at four intervals from 75 to 95, while the cup measurements were determined also at four intervals from "AAA" to "B" sizes. The resultant 6 sizes excluding the least frequent occurrences covered 73.2% of the sample elderly women actual breast sizes. As a consequence of reviewing the production ratio of each brassiere size for the women, it was found that the brassiere size of highest production ratio was "85A" (17.4%), followed by 80A (14.5%), 85AA 90A (10.1%) and 75A (8.7%) in their order.

• 패션비즈니스
• /
• 제5권3호
• /
• pp.9-18
• /
• 2001

This study is to provide basic data for the development of domestic ready-made shoes industry by illustrating any problem in regards to the ready-made shoes for ordinary salary men through looking into its uses and gratifications. Subjects for this study were in between twenties and sixties by applying convenient random sampling method, which was done in January to February, 2001. The results were as follows: 1. General foot shape of subjects was that foot breadth was wide whereas instep height was average. In regards to the metamorphic parts of foot, the most metamorphic part was the fifth toe which could be occurred by disagreeable shoes to foot. 2. General salary men (69.5%) wear the formal shoes and their wearing time per day is over 10 hours (49%), which illustrates that more suitable and convenient functional shoes needs to be developed. 3. Almost of subjects tended to purchase ready-made shoes, and their concerns to be considered when to purchase ready-made shoes were its size and solidity. This finding suggests that the size specification of the ready-made shoes needs to be more specific in terms of its length as well as foot breadth. 4. The most unsatisfied point on the ready-made shoes was the foot breadth. According to the Crosstabulation analysis on the discomfort part and the foot breadth, there existed a significant correlation between the discomfort part and the foot breadth (p$\leq$0.05). The above results make clear that overall salary men have complaints on the ready-made formal shoes in terms of its size and wearing comfort level. This suggests that the subdivision of the shoes size specification needs to be developed to improve the wearing comfort level.

• 수산경영론집
• /
• 제33권1호
• /
• pp.1-18
• /
• 2002

The observer program is being utilized In various fishing areas and fisheries internationally and nationally due to the its expected effectiveness in fisheries management and the collection of bioeconomic data necessary in fisheries management policy. The timely gathered data by observers play substantially a major role in decision-making fisheries policy such as the change in management measures, the application of season closure and area closure and etc. The expected effectiveness of the observer program In fisheries management, generally mentioned, is that it would lead to the increase in stock size from which the level of harvest would consequently increases. This study is aimed to analyze this tentatively expected effectiveness of the observer program in fisheries management. The changes in stock size and the level of harvest over time are analyzed under the observer program assuming the fishermen bear the cost of the observer program by investigating the change in fisherman's fishing activity under the observer program and by combining this changed activity with the biological model. The level of fishing efforts of fishermen was decreased from the results of the increase in fishing cost caused by the observer cost and the decrease in catchable stock size restricted by observers. This reduced level of fishing efforts enables stock size to increase over time and therefore, the expected level of harvest increases as time goes on. Another benefit under the observer program is to reduce management costs from the fact that fishermen are responsible for the cost of the observer program and the avoidance cost of fisherman responding to the fisheries regulation could be eliminated from the surveillance of observer. Therefore, it may possible to accomplish the cost-efficient fisheries management policy.

• 패션비즈니스
• /
• 제24권1호
• /
• pp.29-42
• /
• 2020

The purpose of this study is to analyze the body size and body characteristics of short-statured females in their 20s and 30s using direct measurement data from the 7th size Korea, and to analyze the differences in body dimensions and proportions between the regular and tall groups of short groups. The goal is to identify the dimension areas that need attention when designing and grading patterns for this short groups. As a result, it was found that the short group was shorter in height than the regular group, and the circumferential dimension was similar to the regular group. When designing patterns the tops, the grading of the Bust point-bust point is not necessary for the height, and it is not necessary to grade the Neck point to breast point in the short and regular group. These groups showed a difference in the front silhouette but not in the side silhouette. Based on these findings, the body types were classified into the following three types: 'most bulky and heavy', 'long lower body and small shoulder', and 'small and thin'. The type 1 population was the least distributed, and the relatively small and slim type was the most common. It is expected that the results of this study can be used as a reference when setting pattern designs, grading values, and production ratios by size for short women.

• 패션비즈니스
• /
• 제20권4호
• /
• pp.153-171
• /
• 2016

With the advent of smart clothing for health care and sports, the sophisticated designs with curved seams are drawing attention. One of the problems in those clothing is to determine the design curves in 2D pattern, such that it corresponds to the lines on the intended 3D body. Moreover, the difficulty increases when the original pattern needs to be changed for various sizes and body types. We compare two methods of pattern enlargement in this paper: one is the offset/projection type, and the other is the split grading type. For the enlarged pattern with offset/projection type, the 3D surface offset was first adopted to transform the standard lower body to the target larger size; next, the design lines were projected to the new 3D surface, following which the 3D pattern was developed from the newly transformed 3D surface. In the second method, the enlarged pant patterns were developed by the split grading method. Here, a 3D pattern was developed from the initial body, and then enlarged to the target size by the conventional split grading method. Two feminine pants patterns were examined by 3D virtual fitting. We observed that the 3D offset/projection pants pattern was well fitted, having an evenly distributed surplus, as compared with the sample developed using the split grading method. The difference between the two patterns were apparent at the location where several curved lines merged.

• 패션비즈니스
• /
• 제25권4호
• /
• pp.36-60
• /
• 2021

This study aimed to provide basic data for establishing a sizing system for menswear by investigating body size changes and body shapes in adult men in their 30s to 50s. Data on 52 different upper body categories collected from 4,314 people during the 5-7th Size Korea surveys were analyzed. The waist height, hip height, torso and arm lengths, and torso and upper limb circumferences increased while the arm joint sizes decreased. According to factor analysis, factors 1 and 2 referred to 'the horizontal size of the upper body and limbs' and the 'torso height and upper limb length', respectively, while factors 3 and 4 represented 'shoulder size' and 'upper body length' respectively. In clustering analysis, types 1 and 2 were 'short and fat' and 'tall and thin,' respectively, while types 3 and 4 represented 'tallest and chubby' and 'shortest and small' respectively. Torso length increased in the 30 to 40s in type 1 while torso circumference increased in the 30s and late 40s in type 2. In type 3, shoulders got bigger in the 30s. In type 4, torso circumference increased in the early 30s, and torso length increased in the late 40s. 'Thin' was a typical body shape in the early 30s. Among early 40s men, distribution evolved from 'small' to 'thin.' In the late 40s, while the percentage of 'small' decreased, the ratio of 'obese' increased. In the 50s, 'small' was the most common.

• 서비스연구
• /
• 제13권1호
• /
• pp.1-26
• /
• 2023

본 연구는 스마트공장 도입의 효과와 관련 요인을 분석하였다. 이를 위해 도입기업과 비도입기업의 표본 데이터를 median-size-industry matching method로 각각 110개, 325개를 수집했다. 도입 전년부터 도입 후 4년도까지 재무제표 데이터(ROA 등)를 활용했는데 event study method에 따른 abnormal operating performance, annual abnormal changes를 구한 뒤 Wilcoxon signed-rank test와 t-test로 분석했다. ROA와 매출증가율은 도입 후 단기적인 효과가 나타났으나 장기적으로 이어지지는 않았다. 또한 도입효과에 인력비중, 연구개발 수준, 이전 재무 성과 세 가지 요인이 조절효과로 영향이 있는지 회귀분석을 한 결과 연구개발 수준과 이전 재무 성과의 조절효과를 확인했다. 도입 효과에 도입시기의 영향과 이와 관련된 요인으로 이전 재무 성과와 기업규모의 조절효과가 있는지 회귀분석을 한 결과 장기에 도입시기가 늦을수록 도입효과가 더 커졌고, 이전 재무 성과와 기업규모의 조절효과를 확인했다.

• Journal of Information Technology Applications and Management
• /
• 제21권4_spc호
• /
• pp.485-499
• /
• 2014

Sharing Economy is the modern main item with ICT Development. Of course sharing economic item is the old and long run mainstream, but by the ICT technological development sharing economy is the fostering and affluent factors in the world economic growth. Though, in Korea, till now sharing economy is minimal, that will growth sharply. We can track various business models of sharing economy. Sharing economy is to buy use right not ownership. With the sharing economic business model wee can make also financial sharing model. In finance model we can divide two kind models. First, we can trace small size lending model with p2p type. And second, we can make financial information transaction model. But till now sharing economic system is not activated, because of many reasons. To activate, first we have to set law and various standards, and also government actively support many sharing economy firms and institutions. To catch up developed countries in the field of sharing economy we have to make aggressive and flexible rules and standards.

• 수산경영론집
• /
• 제44권3호
• /
• pp.77-84
• /
• 2013

While some steps in laver aquaculture production can be controlled artificially to a certain extent, the culturing process is largely affected by natural factors, such as the characteristics of seawater, climatic and oceanographic conditions, etc. This study aims to find a direct relationship between climatic and oceanographic factors (water temperature, air temperature, salinity, rainfall, sunshine duration and wind speed) and laver aquaculture production in Wando region, the biggest aquaculture production area of laver, located in the southwest coast of Korea using a multiple regression analysis. Despite the small sample size of a dependent variable, the goodness of model fit appeared acceptable. In addition, the R-squared value was 0.951, which means that the variables were very explanatory. Model results indicated that duration of sunshine, temperature, and rainfall during the farming period from the end of September to the end of April would be important factors affecting significantly to the laver aquaculture production.

• 통상정보연구
• /
• 제11권3호
• /
• pp.311-335
• /
• 2009

This study investigates the factors barrier the performance of Korean manufacturing firms in China. Also an empirical data use the field survey of Korean manufacturing firms in China. as a result, First, we find that employment-cost factor, that is rising labor costs, a change of occupation is an effect the performance of Korean manufacturing firms in China. Second, business beginning year and by 7 region factor is very significant on the performance of Korean FDI firms in china. And then, Korean corporate investment in China is a desirable form of long-term investment shall be determined. also we know that regions of China, differentiated investment approach is effective. finally, The result shows that FDI to China is need of the long term plan, and In actual use, these FDI should be applied flexibly in china business environment.