• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.139-151
• /
• 2014

This paper analyzes factors affecting rail transit ridership at urban rail stations of the Daegu Metropolitan City in 2011. Rail transit ridership is analyzed by dividing weekdays and weekends in order that their differences may be observed. The data used in this study includes various explanatory variables, such as floor area which was collected from building ledger and GIS cadastral map, number of bus routes(line) possible to transfer from urban rail transit, number of students enrolled in middle and high schools, and universities located in access areas of rail transit. For this study, multiple regression models are estimated including various explanatory variables affecting rail transit ridership of weekdays and weekends. From the study, the number of statistically significant explanatory variables and the relative effect of each variable are shown to be different between weekdays and weekends.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.63-74
• /
• 2005

When we introduce the BRT systems, it is very important to decide the operating factors, such as bus-stop locations or headway. If the factors are inappropriate, unessential expenses for the operator and users of the bus line may be caused, and it leads increase of social total cost. So, it is necessary that we consider users' origin and destination of each bus line when we set location of bus-stops and the optimal headway. Meanwhile, Smart Card System was introduced of fare collection for the Public Transportation Reform in Seoul last year. This new card system makes it possible to store up the information about bus operating and passenger's trip link. With these substantial information. we can estimate bus-stop-based O-D table. So, in this thesis, it was studied a systematic methodology to find the optimal location and headway for skip-stop bus system (as a type of first step for BRT). The proposed methodology in this thesis is expected to be useful to effect analysis or setting operating factors for skip-stop bus system in each bus line.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.112-123
• /
• 2017

The accurate forecasting of the public transportation's transit and arrival time has become increasingly important as more people use buses and subways instead of personal vehicles under the government's public transportation promotion policy. Using bus management system (BMS) data, which provide information on the real-time bus location, operation interval, and operation history, it is now possible to analyze the bus schedule reliability. However, the punctuality should always be considered together with the operation safety. Therefore, this study suggests a new methodology to secure both reliability and safety using the BMS data. Unlike other studies, we calculated the bus travel time between two bus stops by dividing the total travel length into 6 sections using 5 different measuring points. In addition, the optimal travel time for each bus route was proposed by analyzing the mean, standard deviation and coefficient of variation of the each section's measurement. This will ensure the reliability, safety and mobility of the bus operation.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.97-108
• /
• 2008

Like always selecting anything in everyday lives, We must choose a travel mode to achieve its purposes driven by diverse factors such as travel distance and accessibility of public transit. Assuming that they are differentiated depending on whether a travel purpose is commuting, shopping or leasure, the study investigated their distinguished impacts on travel mode choice by using binary logit models by travel purpose and mode. Identifying that travel time has an important role in choosing a travel mode whether its purpose is any, the results show that longer travel time tends to increase the possibilities of taking public transit, transfer and rail transit rather than bus. In addition, the easy use of a car and its parking to travelers is more important in their choosing an automobile as a travel mode than other factors. In the models of identifying the probability of mode choice between bus and rail transit, we find that its choice tends to be decided by travelers depending on whether any public transit mode is more accessible to them. When comparing the results among travel purposes, we identify that the easy use of a car and parking in their destination is more important for commuting, while accessibility of public transit in their origination increases the probability of taking a transit mode.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.78-89
• /
• 2022

Super - Bus Rapid Transit (S-BRT), adding the advantages of urban railroads to BRT, has emerged to solve the problem of low speed and reliability of the existing BRT. Notably, the S-BRT driveway is classified into exclusive lanes and roads, as BRT, in the domestic guidelines. However, S-BRT and BRT have different operating goals and characteristics, so it is necessary to systematize the S-BRT driveway. Therefore, this study classified an S-BRT driveway into exclusive lane, shared lane with overtaking lane, and shared lane without overtaking lane based on domestic conditions. Subsequently, a control strategy for transit signal priority in each driveway was presented by the study based on the characteristics of the driveway to achieve the S-BRT target service level. Finally, the S-BRT target service level was almost achieved, and the travel speed was high and increased in the order respectively in the exclusive lane, shared lane with overtaking lane, and shared lane without overtaking lane in the study. Hence, it is important to operate a transit signal priority considering the characteristics of each driveway when operating the S-BRT. In essence, this study is expected to be used as a reference for driveway design and transit signal priority operation when introducing S-BRT in each local government in the future.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.510-515
• /
• 2005

Since 1974, the first subway is constructed in Seoul metropolitan area, from 1985 country metropolitan subways have been built. But most country metropolitan subways cannot reach the goal of transportation sharing ratio and show a loss. In this paper, I investigate the issues of country metropolitan subways and present the methods to improve them focusing on strengthening transit network. At first, it is introduced that the method can complement incomplete network from insufficient subway lines. And I propose the consolidation method using KORAIL railway lines. Finally, the connecting method into subway missing area is presented with various transit systems like BRT, Guideway Bus and single railway line extension.

• Journal of Korean Port Research
• /
• v.8 no.1
• /
• pp.3-15
• /
• 1994

Most of Cities are suffering from the traffic congestion problem with the vehicles increased. Especially, the City of Pusan is experiencing the severest traffic congestion with the lower read capacity and the higher travel demand than any other cities in the country. Thus, the purpose of this study was to grasp the conditions, review the problems and finally suggest the improvements which we faced at this time for the construction of the Urban Transportation System considered in Pusan area. Based upon the results, it was concluded that firstly the Urban Transportation System(UTS) in Pusan area should be constructed by the Public Transportation System in the center of the Public Transit Modes(i.e., bus and subway), secondly the Para-transit Modes(i.e., Light Rail Transit, LRT) introduced, and thirdly the Transportation Demand Management(TDM) implemented with the expansion of the transportation facilities if possible.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.1-12
• /
• 2008

This paper identifies public transit-poors and derives spatial characteristics of the poors' distribution in an urban area by utilizing buffering analysis of geographic information systems and remote sensing techniques in the case of Daegu metropolitan city. Since special attention is given to elderlies, this study assigns three hundred meter buffer from bus/subway station as service boundary for elderlies. The results of this study tell us that 1) the transit-poors are concentrated on suburban and rural regions, 2) high proportions of the transit poors are elderlies with spatial variations in many regions, 3) the main housing type of the transit-poors is single detached house. We expect that this study can contribute to build an effective policy-making by showing essential technical processes and methods in identifying policy-need groups and their characteristics of spatial distribution.

• 한국도로학회:학술대회논문집
• /
• 2011.03a
• /
• pp.243-251
• /
• 2011

• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.47-56
• /
• 2003

Considering the high density developments along the major traffic corridors in Seoul, transit-oriented street designs will be a very effective to control traffic congestion along the corridors. For testing the effectiveness, we selected. for our case study, Kangnam Street, which is one of the most highly developed corridors in Seoul The traffic study on Kangnam street in 2000 shows that the daily average bus speed is 11.73km/h, which is 5km/h lower than the auto speed. The Central Bus Lane system was applied on the Kangnam street to test impact on bus speed as well as auto speed. Simulation results show that with Central Bus Lane have been improved the travel speeds of bus as well as auto on Kangnam street from 14.4km/hr to 35.0km/hr and from 25.1km/hr to 26.1km/hr, respectively. The bus market share increases about 6-8 percentages. Especially, 13.4% of bus users are increased for long-distance trips.