• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.671-676
• /
• 2003

This paper presents 3-phase current regulation of SR motor by only single current sensor. The conventional drive system of SR motor has a current sensor per each phase. In this paper, The asymmetric bridge converter which Is able to control independently phases and be excited simultaneously is used fs the driver system for 6/4 poles SR motor. And the sensor Is replaced 3 sensors of each phase with only one on bus line of converter so as to detect current of every phase. A drive logic circuit is designed on EPLD with Delta modulation using a fixed frequency This technique is verified through simulation and experiment.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1374-1382
• /
• 1995

In TFT-LCDs, as the display size area becomes larger, and the resolution higher, we have to consider the image degradation effects due to the incorporation of the TFT-LCD parameters such as the data-line resistance, the common electrode resistance, the data-line to common parasitic capacitance, and the output characteristics of driver ICs. One of the degradation effects is crosstalk resulting from the coupling between the source bus-line and common electrode. Since a source signal which represents a large number of display data is supposed to vary frequently, the common signal level is affected through the coupling effect, resulting in the degradation of nearby pixel drive signals. Therefore, we proposed a method to compensate for this source-common electrode coupling effect, we also designed and experimented the feasibility of our crosstalk compensation circuit in the actual TFT-LCD. We saw that the newly designed compensation circuit greatly reduced the crosstalk in display pattern image.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.183-183
• /
• 2007

Bimodal Tram is a new public transportation system combined subway with bus and consists of variable electric equipment to accomplish the comfortness, reliability, safety and so on. One of them is VCU(Vehicle Control Unit) for Performing driver's cmmand and monitoring the state of other equipment. To lessen the wiring and the interference of outer electromagnetic noises is very important things for bimodal tram with complicated configuration of electric equipments. This paper has investigated the application of CAN(Controller Area Network) communication method for VCU which has display, central unit and several nodes that are connected with other electric equipments(HVAC, door controller etc). We designed and manufactured the prototype of VCU which eventually will be installed on bimodal tram being developed in KRRI at present.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1093-1095
• /
• 2003

MSC(Multi-Spectral Camera) system is a remote sensing instrument to obtain high resolution ground image. MSC system includes main control unit, called SBC(Single Board Computer). SBC controls all the sub-units of MSC system and communicates with spacecraft bus. The software developed for SBC should be reliable and autonomous to support various kinds of imaging missions. It is being developed using VxWorks real-time operating system to manage all tasks for all units efficiently. In this paper, the characteristics of the embedded software on the MSC system will be presented. It covers the hardware related characteristics like the BSP(Board Support Package), device driver and code patch mechanism.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.5669-5684
• /
• 2018

The new mobile edge network architecture has been required for an increasing amount of traffic, quality requirements, advanced driver assistance system for autonomous driving and new cloud computing demands on highway. This article proposes a hierarchical cloud computing architecture to enhance performance by using adaptive data load distribution for buses that play the role of edge computing server. A vehicular dynamic cloud is based on wireless architecture including Wireless Local Area Network and Long Term Evolution Advanced communication is used for data transmission between moving buses and cars. The main advantages of the proposed architecture include both a reduction of data loading for top layer cloud server and effective data distribution on traffic jam highway where moving vehicles require video on demand (VOD) services from server. Through the description of real environment based on NS-2 network simulation, we conducted experiments to validate the proposed new architecture. Moreover, we show the feasibility and effectiveness for the connected car media service on highway.

• Journal of Aerospace System Engineering
• /
• v.14 no.6
• /
• pp.74-78
• /
• 2020

The cooler driver electronics (CDE) for maintaining a low temperature of a satellite payload IR sensor has a compressor with a pulsation current load when in operation. This pulsation current creates a large voltage fluctuation and may negatively affect both the load and regulated bus stability. Thus, a CDE power conditioning system has a battery for use as a buffer that is connected in front of the CDE load line. In this system, a battery charger limiter circuit is required to protect from an over-charge of the battery and power to the load. In this study, an optimal design and parameter selection were developed and simulated.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.9-14
• /
• 2020

This paper is a purpose to study the failure examples for a large bus vehicle fire. The first example, the researcher certified the fact that the absorbing material break away from the upper side of engine room because of weaken durability and the fire was produced in engine. The second example, it sought the fact that the fire breaks out by electric short because of over-load of compressor. The third example, it found the fact that the fire took place by heating of bellows upper part that was connected with muffler and exhaust manifold. The fourth example, it knew the fact that the fire occurred because of the electric short inside junction box of crash body part that was located to driver seat rightside. Therefore, the fire of a large bus occurring by decrepit of absorbing material and electric short have to thoroughgoingly manage the damage and dangerousness if it happens.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.87-104
• /
• 2015

Currently the IoT (Internet of Things) environments and related technologies are being developed rapidly through the networks for connecting many intelligent objects. The IoT is providing artificial intelligent services combined with context recognition based knowledge and communication methods between human and objects and objects to objects. With the help of IoT technology, many research works are being developed using the C-ITS (Cooperative Intelligent Transport System) which uses road infrastructure and traveling vehicles as traffic control infrastructures and resources for improving and increasing driver's convenience and safety through two way communication such as bus-only lane and license plate recognition and road accidents, works ahead reports, which are eventually for advancing traffic effectiveness. In this paper, a system for deciding whether the traveling vehicle is possible or not to drive on bus-only lane in highway is researched using the lane and number plate recognition on the road in C-ITS traffic infrastructure environments. The number plates of vehicles on the straight ahead and sides are identified after the location of bus-only lane is discovered through the lane recognition method. Research results and experimental outcomes are presented which are supposed to be used by traffic management infrastructure and controlling system in future.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.195-203
• /
• 2009

This research wished to risk type and examine closely driver special quality and relation of traffic accidents by occurrence type of traffic accidents and traffic accidents seriousness examine closely relation with Severity. Fractionate traffic accidents type by eight, and driver's special quality for risk group's classification did to distinction of sex, vehicle type, age etc. analyzed relation with injury degree adding belt used putting on availability for security the objectivity with wave. Used log-Linear model and Logit model for analysis of category data. A head-on collision and overtaking accident, right-turn accident are high injury or death accident and possibility to associate in relation with accident type and seriousness degree. In risk group analysis The age less than 20 years in motor-cycle driver, taxi driver in 41 years to 50 years old are very dangerous. The woman also was construed to the more risk group than man from when related to car, mini-bus, goods vehicle etc. Therefore, traffic safety education and Enforcement for risk group that way that can reduce accident that produce to reduce a loss of lives at traffic accidents appearance a head-on collision and overtaking accidents, right-turn accidents should be studied and as traffic accidents weakness class may have to be solidified.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.295-300
• /
• 2007

The Linux-based embedded systems such as mobile telephones. PDAs and MP3 players are widely in use. USB(Universal Serial Bus) is the interface for data communication between the computers and these peripheral devices. Some embedded systems like intelligent home networking and multimedia streaming require guaranteed QoS(Quality of Service), which is needed for real time transmission of UDP/IP messages through USB. Although USB Ethernet driver is supported by USB Gadget API in Linux, it is unable to provide the desirable QoS required by each type or small embedded systems due to the unpredictability or TCP/IP Stack in Linux. This paper proposes IP-Over-USB to improve QoS of UDP/IP message transmission in the embedded systems using USB in Linux system.