• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.138-144
• /
• 2010

If the vibration is occurred in a large-sized bus roof, it makes people annoying and complaining the quality of a large-sized bus. So in design stage, it must be considered. To assess vibration at the roof which is equipped with air conditioner in design stage, finite element model is constructed. Computer simulation analysis and experimental method are performed. The dynamic characteristics of the large-sized bus are found by using eigenvalue method. It is related with dynamic behavior. The running conditions of a large-sized bus are velocity and road condition which followed experimental conditions. And the frequency response of a large-sized bus is well correlated with analysis result. Modal participation method is used for finding major modes at each peak. Using this method, we found that front and rear suspension system, engine mounting system and roof structure are the major reasons of the roof vibration. To reduce vibration level of roof in a large-sized bus, spring stiffness of front and rear suspension system, spring stiffness of engine mounting system and roof structure are properly combined. From this study, the vibration characteristics of the roof structure of a large-sized bus can be to a satisfactory level.

• 대한교통학회지
• /
• 제25권5호
• /
• pp.43-55
• /
• 2007

경기도는 대중교통의육성및이용촉진에관한법률 제18조(대중교통운영자에 대한 경영 및 서비스평가)와 동법 시행령 제21조 -25조를 근거로 2005년부터 매년 버스업체에 대한 경영 및 서비스 평가를 시행하고 있다. 버스업체에 대한 경영 및 서비스평가 결과는 버스서비스 개선을 위한 정책수립에 활용함과 동시에 여객자동차운수사업법 제51조에 의한 버스재정지원금 중 운영개선지원금과 경영 및 서비스평가 인센티브 산정에 적용하고 있다. 경영 및 서비스평가는 많은 인력과 재원이 투입되고 버스업체의 경영 및 서비스 평가제도에 대한 저항이 존재하는 만큼 제도의 지속적인 추진을 위해서는 도입 효과분석이 필요하다. 본 연구에서는 경기도의 경영 및 서비스평가 도입효과를 정성적 방법과 정량적 방법을 병행하여 평가한 결과 도입효과를 긍정적으로 확인할 수 있었다. 정량적 평가는 버스업체에 대한 일반현황 조사, 유관기관 조사, 그리고 행정기관 조사에 의한 결과를 제도가 최초 도입된 2005년과 2006년을 대상으로 전후비교를 통해 분석되었으며, 평가결과를 종합하면 제도 도입에 따른 도입효과를 확실히 확인할 수 있었다. 정성적 평가는 행정기관 버스재정지원담당자, 버스업체 운영자(경영자), 운전직 종사자를 대상으로 실시한 설문조사 결과를 기초로 분석되었으며, 평가결과를 종합하면, 모든 조사항목에서 평가제도 도입효과에 대해 긍정적 답변이 우세한 것으로 나타나 경영 및 서비스 평가제도에 대하여 설문대상자들이 긍정적으로 받아들이고 있는 것으로 판단된다. 본 연구의 결과는 평가지표의 적정성, 평가의 실효성에 문제에 대한 대응논리로 활용될 수 있을 뿐만 아니라 버스서비스 향상을 위한 평가항목의 보완 및 평가항목별(분야별) 목표 값을 설정하는 기초자료로 활용될 수 있다.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.31-38
• /
• 2010

Bus manufacturers have tested and studied the dynamic collapse behavior of a bus body structure in rollover since UN ECE established ECE Regulation 66 to provide the requirement for the strength of bus structure. In spite of the costly cycles of practical tests, however, it is still a hard task to meet the rollover regulation by means of local reinforcements in the bus structure. Therefore it is necessary to develop a well designed strategy for the rollover strength implemented in the early stage of vehicle development. In this study, the suitable development method for each design stage from a component to complete body structure was considered to make a well-established development process of a bus body structure for rollover safety. For the efficient approach of the concept design stage, a numerical model based on the plastic hinge theory was used instead of detailed shell models. After setting up the concept design for the component size and geometry, the shell model was used to confirm and optimize the whole structure composition. The process developed in this study was practically used as an effective method to predict the rollover behavior of a new bus body structure.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.309-317
• /
• 2022

There are 2,517 buses on 143 routes in Busan. One company is operating 36 hydrogen city buses (1.4%) and two hydrogen charging stations. By 2030, the number of hydrogen city buses will be increased to 500 and 40 hydrogen charging stations. In the survey of city bus companies, 61.5% of respondents answered 'not reviewing (at all)' and 23.0% of respondents '(actively) reviewing hydrogen buses'. And as for the level of help that hydrogen city buses give to bus companies, 23.5% answered 'helpful'. In order to promote the introduction of hydrogen city buses, first, it is necessary to stipulate support for hydrogen bus purchase cost and hydrogen charging station construction cost in related ordinances so that bus companies do not increase their burden of purchasing hydrogen buses in the future. Second, identify the number of new city buses introduced, convert about 50% to hydrogen city buses by the mid-term, and build 50% of the chargers in public garages with hydrogen chargers. Third, expand hydrogen refueling stations in city bus garages.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.675-676
• /
• 2007

This Paper presents circuit improvement of 345kV Bus bar protection panel by using VDD (Voltage disturbance detection) relay with distinctive ability between human error in the field test and real facility faults. Therefore, We expect that this improvement of circuit helps decrease of blackout coming from human error. In order to guarantee electric power system reliability, consistent study of human error prevention in the event of field test is necessarily required

• 한국수소및신에너지학회논문집
• /
• 제25권3호
• /
• pp.264-270
• /
• 2014

Fuel cell technology is the most representative area of alternative energy field on vehicle industry according to the limitation of petroleum resources. In recent years, the technology of fuel cell vehicles has made rapid progress, Hyundai Motor Company (HMC) reached to mass production of the Tucson ix hydrogen fuel cell vehicles first in the world. In addition, HMC is accelerating the development of hydrogen fuel cell buses, which have a number of advantages for hydrogen infrastructure and mass transport personnel. In this study, we examined potential of the commercialization through the demonstration of hydrogen fuel cell buses. As a result, we identified that the mass-production possibility of FCB has high potential and HMC's technology will lead to fuel cell bus industry.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.31-37
• /
• 2001

In this paper, a method to improve judder by changing the front and rear wheel brake force distribution ratio was proposed. ADAMS, a commercial dynamic analysis software was used to model a small size bus and its modeling procedure was explained. By using the ADAMS vehicle model, the judder phenomena of the small bus were analyzed, and based on analysis results, the validity of the improvement method was proposed. Also in order to lessen the problem jubber sensitivity analysis and test results were proposed.

• 대한지리학회지
• /
• 제43권4호
• /
• pp.544-560
• /
• 2008

인천국제공항 버스 노선망의 형성과 그 요인을 밝히기 위하여 사회 경제적 관점에서 분석한 결과는 다음과 같다. 수도권과 충청도, 전주 익산을 배후지로 한 김포국제공항의 노선버스는 인천국제공항이 개항되면서 강원도와 광주, 나아가 영남지방의 주요 도시와도 노선이 개설되고 수도권도 노선망이 더욱 확충되었다. 인천국제공항 버스운행은 단독 또는 복수의 사업체가 노선을 개설했는데, 공동운행을 하는 경우는 수익성이 불확실하거나 지역연고의 노선을 확보하기 위함이다. 항공기여객밀도와 버스 편도 운행회수와의 분석에서 강서구를 제외한 서울시와 서울시의 위성도시인 수원 성남 안양 군포 구리 오산시는 운행회수를 감소시키고, 나머지 시 군 구는 운행회수를 증가시켜야 할 것이다. 수도권의 경우 노선버스와 지하철(전철)과의 운임과 최단소요시간을 비교해 보면 노선버스의 운임은 비싸지만 소요시간이 짧고, 또 환승의 불편이 없기 때문에 이용객이 지하철(전철)보다 많이 이용한다고 할 수 있다. 한편 비수도권에서는 남동부 주변지역에 공항이 분포한 지역은 국내항공기가 노선버스보다 우위에 있으나 대구와 공항이 입지하지 않는 지역은 노선버스가 우위를 나타내고 있다는 점이 밝혀졌다.

• 대한인간공학회지
• /
• 제30권5호
• /
• pp.659-669
• /
• 2011

Objective: The aim of this study is to suggest a package layout guideline for low-floor bus by interview with passengers and observations of their behavior. Background: Increasing attention has been introduced the low-floor bus to be more suitable for use by transportation handicapped. Complex issues are involved in providing comfortable services to all people. We are going to suggest package layout guidelines for more comfortable and suitable travel to all people. Method: The two times of survey and video observation sessions were conducted on low-floor buses in Seoul; (1) a finding of potential issues in the first session, (2) a confirming of issues from the last session. Results: The three of major issues were founded in this study; (1) difficulties in supporting body when standing, (2) difficulties in sitting on front wheel pan seat, (3) difficulties in passing through the aisle. Conclusion: There were clear differences between public and transportation handicapped in using some tools which are used for support body such as roof hand rails, side hand rails, and hand rail rings. Some of design problems were founded to improve from the perspective of ergonomics and universal design. Such differences and design guidelines have to be considered in bus design as well as commercial vehicle. Application: The proposed design guidelines can be used to development of low-floor bus and other public transportations.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.266-272
• /
• 2022

Structural stress analysis is performed to confirm the safety of the structures before the construction, and stress analysis is performed to evaluate the safety of various components before the ship or vehicle corresponding to the moving structure is manufactured. In this case, the stress analysis work is performed using the stress analysis software of each company. The results of the stress analysis based on the boundary conditions of the applied loads are analyzed to evaluate the safety of the structure, but the results are difficult to verify because most of the stress analysis software possessed by each company is one. In this paper, we were performed the stress analysis of the bracket applied to the bare chassis of the 30-passenger bus under development is performed by HYPERMESH. In order to verify this, the stress analysis is performed using ANSA/META under the same boundary condition. The stress analysis results of ANSA/META and HYPERMESH showed that they had the same stress distribution and the maximum stress occurred at the same location. Taken together, the results of stress analysis using HYPERMESH were reliable.