• 콘크리트학회논문집
• /
• 제11권5호
• /
• pp.69-77
• /
• 1999

A spalling is defined as the damages of concrete exposed to high temperature during the fire by causing cracks and localized bursting of small pieces of concrete. It is reported that spalling is caused by the vapor pressure and polypropylene(PP) fiber has an important role in protecting from spalling. This paper is a study on the properties and spalling resistance of high-performance concrete with the kinds of aggregate and the contents of PP fiber. According to the experimental results, concrete contained no PP fiber take place in the form of the surface spalling and the failure of specimenns after fire test regardless of the kinds of aggregate. Concrete contained more than 0.05% of PP fiber with the aggregate of basalt does not take place the spalling, while the concrete using granite and limestone does the surface spalling. It is found that residual compressive strength after exposed at high temperature has 50~60% of its original strength. Although specimens after exposed at high temperature is cured at water for 28days, they do not recover their original strength.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.397-403
• /
• 2014

In this study, various types of Jumchi Hanji were made to develop shroud materials as a new use for Hanji. The properties of Hanji (basis weight, thickness, apparent density, bulk, tensile strength, wet tensile strength, elongation ratio, tear strength, bursting strength, and folding endurance) are measured. In all cases, Jumchi Hanji had a higher thickness, lower apparent density and higher bulk than Hanji because pores in the intervals of mulberry fiber are composed of bulk. So, it is considered to carry a value as a textile material. As for the results of the strength analysis of Jumchi Hanji, Jumchi technique enhances 25% of elongation ratio, which is regarded the most important role in textiles and 35% of bulk. Moreover, it was shown that it enhanced overall strength. In conclusion, it implies the possibility of applying it as a shroud material. Jumchi Hanji is thought to have enough potential to be developed as a material to carry the characteristics of Hanji in the textile market.

• 한국지반신소재학회논문집
• /
• 제6권1호
• /
• pp.39-43
• /
• 2007

열융착법을 이용하여 보강과 배수기능을 가진 니들펀치 및 스펀본딩 부직포의 지오컴포지트를 제조하였다. 이 다층 부직포의 물성(인장, 인열 및 파영강도, 투수도 등)은 열융착법을 사용하여 제조될 경우 온도, 압력, 접착시간 등의 공정인자에 좌우된다. 따라서, 열융착법으로 제조된 지오컴포지트의 공정인자와 물성의 최적화는 매우 중요하다. 본 연구에서는 인공신경망(ANN)을 사용하여 지오컴포지트의 제조공정 최적화를 위한 알고리즘이 개발되었다. 지오컴포지트의 공정인자를 변화시켜 부직포 성능변화를 예측하기 위한 신경망 모사가 적용되었으며, 분석결과에 대한 제조방법의 효과를 조사하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.79-83
• /
• 1992

According to the variation of hydrostatic pressure on the central axis of deformable material, the V-shaped central bursting defect may be created on extrusion or drawing processes. The process factors whichaffect the generation of defects are die semi-angle, reduction ratio of cross-sectional area, friction factor, material properties and so on. The combination of these factors can determine the prossibility of defect creation and the shape of various round holes which have been created inside already. By the rigid plastic finite element method, this paper describes the observations of change in shape of a round hole with process conditions suchas die semi-angle, reduction ratio of cross-sectional area and friction factorat the unsteady state of axi-symmetrical extrusion process when the round hole is alreadyexisted inside the original billet, and also, the effects of process factors are investigated to prevent the possible defects.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.459-463
• /
• 2006

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were evaluated and compared each other. The liner board which is dried at high temperature with pressure by the Condebelt showed a superior performance in strength over conventional liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium -Carbonate and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.

• 한국포장학회지
• /
• 제11권2호
• /
• pp.91-96
• /
• 2005

Determination of safety factor of corrugated fiberboard boxes used for agricultural products is very complicated process due to nature of living products. Moisture content is one of the most critical factors to determine overall physical strength of paper, so its influences on strength properties of corrugated board made from different raw materials must be quantified. The results obtained from the study were summarized as follows; 1. Results show a detrimental effect on bursting strength and compressive strength of liners with increasing relative humidity of environment and moisture content of liners. 2. The relevance of equilibrium moisture content at varying relative humidity levels was proved and its relationship was used as an important factor to estimate box compression strength. 3. Test results was statistically used for establish the relationship between relative humidity and moisture content of liners. Estimated compression strength of boxes at varying moisture content was similar to results of theoretical equations such as Kellicutt's. Further study could be carried out in order to determine a optimum safety factors of various corrugated board boxes for agricultural products.

• 펄프종이기술
• /
• 제46권1호
• /
• pp.29-38
• /
• 2014

Guar gum is added to the pulp suspension at the suction side of the fan pump just before the sheet is formed on either a fourdrinier or cylinder machine. Guar gum replaced and supplements these hemicelluloses in paper bonding with many advantages, which include improved sheet formation with a more random distribution of pulp fibers. But, guar gum has serious storage problem. This material has easily decayed after High-temperature conditions such as summer. In this study, various properties of cotton handsheet were measured to solve the problem of deformation while storing guar gum and to improve the durability. After aging, which is one of the durability tests, cotton handsheet with 0.2% and 0.3% of A-PAM showed improved mechanical properties and bursting index and folding endurance of cotton handsheet with 0.3% of A-PAM were similar to those with guar gum. The yellowness loss of cotton handsheet with synthetic polymers was lower than those with guar gum.

• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.11-22
• /
• 2009

This study surveys the optimum processing conditions of ATY for PET braiding for automotive hoses. For this purpose, high tenacity and low shrinkable PET filaments with three types of deniers are prepared. Twenty seven ATY specimens are manufactured with variation of feed speed and overfeed on the air jet texturing machine. The physical properties of various yam according to the ATY processing conditions are measured and analysed for deciding the optimum ATY processing condition. Two kinds of ATY filaments made under the optimum air texturing conditions are processed with variation of tpm, heat setting temperature and heat setting time on the 2-for-l twister and setting chamber, respectively. The optimum twisting and heat setting conditions are decided through analysis of the yam physical properties. Finally, the braiding fabric specimens are manufactured using conventional filament and newly developed filament made under optimum twisting and heat setting conditions. The bursting strengths of these braiding specimens are compared and discussed between two types of specimens.

• 한국포장학회지
• /
• 제28권3호
• /
• pp.157-163
• /
• 2022

본 연구에서는 전자레인지 조리 시 발생하는 포장 내부의 수증기를 스스로 방출할 수 있는 PLA 기반 스마트 복합 필름을 제조하였다. 제조된 복합필름의 전자레인지 조리가 가능한 HMR 제품의 포장재로써 적용가능성을 평가하기 위해 DSC, UTM, GTR 및 전자레인지 모의 적용 평가를 통해 열적 특성, 기계적 특성, 온도 구간별 기체 투과도 및 전자레인지 적용성을 평가하였다. 복합필름의 열적 특성을 확인한 결과, PLA와 PEG의 강한 화학적 상호작용을 확인하였고 본 연구에서 기대한 전자레인지 조리 온도 내에서 PEG가 용융되는 것을 확인하였다. 또한, 제조된 복합필름은 PEG의 첨가로 인해 인장강도는 감소하였지만 연신율이 증가하였고, nanoclay의 함량이 증가함에 따라 감소된 인장강도가 일부 회복한 것을 확인하였다. 또한, 기체투과도의 경우 PEG의 T_m1 이상인 65℃ 부터 PEG가 용융되면서 투과도가 비약적으로 증가한 것을 확인하였다. 전자레인지 모의 적용 평가를 통해 pure PLA는 내부 수증기를 방출하지 못하고 그 압력을 버티지 못해 폭발한 것에 비해, 복합필름의 경우 전자레인지 수증기 발생 온도에서 그 형태를 유지하며 효과적으로 내부 수증기를 자가방출한 것을 확인하였다. 이러한 결과를 바탕으로 본 연구에서 제조한 스마트 복합필름은 포장재로써 향후 전자레인지 조리 HMR식품 포장재로써 적용될 수 있다.

• 한국자기학회지
• /
• 제15권5호
• /
• pp.292-297
• /
• 2005

원자력 발전소 증기발생기의 전열관은 전열면으로서의 역할과 방사능 차단벽의 역할로서 중요하며, 증기발생기 튜브의 폭발은 원자력 발전소 사고에 관계된다. 증기발생기 전열관 재료로는 Incone1600이 사용되고 있으며, 이 재료가 금속이면서 비자성이기 때문에 와전류 탐상법으로 전열관의 결함을 탐지하고 있다. 본 연구에서는 탐상 감도를 향상시키기 위하여 차등형 와전류 탐촉자를 개발하였으며, 개발된 차등형 와전류 탐촉자의 성능검사를 위해 Inconel600과 자기적 성질이 비슷하고 구하기 쉬운 SUS304로 가로 100mm, 세로 100mm, 그리고 두께 10mm인 평판에 선형결함과 원형결함을 가공하여 기준시편으로 제작하였다. 제작된 차등형 와전류 탐촉자를 사용하여, 자화주파수 50kHz, lift-off 0.4mm에서 직경이 0.25mm이고, 깊이가 0.2mm 크기의 결함까지 측정이 가능하였다.