• 한국환경복원기술학회지
• /
• 제14권2호
• /
• pp.47-57
• /
• 2011

This study monitored forest plant species vulnerable to climate change in Jiri Mountain, one of Korea's representative alpine regions, in order to securely preserve plant genetic resources susceptible to climate change and to utilize the results as basic data for bioclimatology prediction and management on a long-term basis. A majority of indicator plants tended to blossom one week to one month later in 2010 than in 2009. As with the blooming dates, the falling dates of blossoms became later in most species, with the exception for Weigela florida and Oplopanax elatus. Leaf bursting as well fell on later dates in a majority of species excluding Carpinus laxiflora and Cupressus sempervirens, displaying the most obvious differences among the data of analysis of the 2009-2010 physiological cycle changes. It is believed that was due to the fact that temperatures in February, March and April, which affect plants' blossoming and leaf bursting, were lower in 2010 than in 2009 and that cold temperatures in the winter lasted for a longer period in 2010 than in 2009. The dates of leaves being changed to red were similar in 2009 and 2010 by being or later or earlier by several weeks in 2010 than in 2009 without any regularity. Most species' leaves began to fall at similar dates in 2009 and 2010 or at later dates by one to two weeks in 2010 than in 2009. The temperature differences in late 2009 and late 2010 were not so large, resulting in similar dates of falling leaves, and gaps in several indicator plants' physiological cycles without any regularity can be attributed to each individual plant's physiological and environmental characteristics.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권4호
• /
• pp.155-159
• /
• 2004

This work reports the theoretical and experimental investigations of capillary bust valves to regulate liquid flow in microchannels. The theoretical analysis uses the Young-Laplace equation and geometrical considerations to predict the pressure at the edge of the valve opening. Numerical simulations are employed to calculate the meniscus shape evolution while the interface is pinned at the valve edge. Microchannels and valves are fabricated using soft lithography. A wafer-rotating system, which can adjust the driving pressure by rotational speed, induces a liquid flow. Experimentally measured valve-bursting pressure agrees with theoretical predictions.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.732-738
• /
• 2004

One of the main degradation mechanisms in steam generator tubes is stress corrosion cracking induced by residual stress. The resulting damages can cause tube bursting or leakage of the primary water which contains radioactivity. Shot peening technique has been used to prevent stress corrosion crack growth in steam generator tubes. In order to investigate the shot peening effect on stress corrosion cracking stress intensity factors are calculated for the semi-elliptical surface crack which is located in residual stress region. The residual stress distribution in steam generator tubes is obtained from the simple model proposed by Frederick et al.

• 한국식품저장유통학회지
• /
• 제4권3호
• /
• pp.245-249
• /
• 1997

In order to find effective linerboard compositions for the corrugated fibreboard containers for apples, we have evaluated the strength and the cost effectiveness of the various linerboards and corrugated fibreboard containers. From the results, we suggest SC240, WLK210 or SK180 for the outer liners, M180 to M250 for the mediums, and K2200 or Al80 for the inner liners, respectively. Furthermore, we recommend two cost effective types of corrugated fibreboard compositions, SC240/S120/S120/M160/A180 for the white face liners, and SK180/M180/S120/M180/A180 for the color face liners. Evidence has been presented to support the conclusion that the new high compression strength corrugated fibreboard containers have better performance in the compression and bursting strength tests, while reducing material costs by thirty four percents.

• International Journal of Concrete Structures and Materials
• /
• 제18권2E호
• /
• pp.103-109
• /
• 2006

Spalling is defined as damages to concrete exposed to high temperature during fire, causing cracks and localized bursting of small pieces of concrete. As the concrete strength increases, the degree of damage caused by spalling becomes more serious due to impaired permeability. It is reported that polypropylene(PP) fiber has an important role in protecting concrete from spalling, and the optimum dosage of PP fiber is 0.2%. However, this study was conducted on non-reinforced concrete specimens. The high-temperature behavior of high-strength reinforced concrete columns with various concrete strength and various quantity of PP fibers is investigated in this study. The results revealed that the ratio of unstressed residual strength of columns increased as the concrete strength increased and as the quantity of PP fiber increased from 0% to 0.2%. However, the effect of PP fiber quantity on residual strength of column was barely above 0.2%.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2253-2261
• /
• 2002

Recently the hydroforming technology has drawn a lot of attention because of its capability to produce high quality and light weight parts. In the present study, the tube expansion - one of the simplest hydroforming processes, has been investigated in order to understand fundamental phenomena such as deformation characteristics and effect of process parameters. As a result, the most important process parameters, which determine the state of stress at the expanded zone, were found to be pressure and die displacement. If the stress becomes equi-axial tension at the zone, necking occurs at some distance from the weld line and develops into a crack along the axial direction. Some aspects of mechanical property measurements as well as distributions of hardness and microstructure are also discussed in this paper.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.79-83
• /
• 2012

Anti-theft safety caps for bolted joints are necessary to ensure the safety of citizens and prevent theft of manholes, bridge guardrails, bulletin boards, subway safety handrails and others. Safety caps enhance the look of bolted joints, avert accidents that involve hitting the head of bolts, hamper them from coming loose by covering the head of bolts. This study focuses on press die design methods and press molding condition setting to resolve bursting and cracks in products, and on molding material selection and heat treatment technologies to boost life extension.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.109-114
• /
• 2001

Forming pressure of the rupture disc has been analyzed theoretically and verified by experiments. Final shape of the rupture disc after forming process is assumed to be hemi-ellipsoid for small height of the rupture disc. The predicted forming pressures are in good agreement with those by experiment. A new simple model has been proposed to predict the burst pressure of the rupture disc. Experimental results show that the proposed model of burst pressure describes the bursting characteristics of the rupture disc very well.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.411-416
• /
• 2002

The emergence of viral diseases transmitted is nowadays a central problem in the world. Problem, which is becoming very critical in developing countries, where the health systems are not yet enough developed to face the bursting of such diseases. Emerging viral diseases constitute one of the major threats to human being that are arising in the modern world. Besides bio-chemical and medical researches, new orientations are developed to understand the environmental dimensions of such emergence. Questions concerning the inter-plays between the environmental and disease dynamics are building up new investigations, both in remote sensing and GIS, for the elaboration of levels of organization of space and environment in relation to incidences, to gain understandings in these issues. Environmental attributes attached to land cover types: area, spatial heterogeneity and physical state, are derived from remote sensing and applied to uncover related dimensions of the Dengue disease.

• 한국안전학회지
• /
• 제22권5호
• /
• pp.65-70
• /
• 2007

This paper is estimation of structure damage caused by VCE(Vapor Cloud Explosion) in enclosure. As we estimate the influence of damage which occur at gas facility in factory. We can utilize the elementary data of safety distance. In this study, the influence of over-pressure caused by VCE in enclosure was calculated by using the Hopkinson's scaling law and the accident damage was estimated by applying the influence on the adjacent structure into the probit model. As a result of the damage estimation conducted by using the probit model, both the damage possibility of explosion overpressure to structures of 20 meters away and to glass bursting of 80 meters away was nearly zero in open space explosion.