• 대한후두음성언어의학회지
• /
• 제17권2호
• /
• pp.89-97
• /
• 2006

The stop consonants in Korean are classified into three types according to the manner of articulation as unaspirated (UA), slightly aspirated (SA) and heavily aspirated (HA) stops. Both the UA and the HA types are always voiceless in any environment. Generally, the voice onset time (VOT) could be measured spectrographically from release of consonant burst to onset of following vowel. The VOT of the UA type is within 20 msec of the burst, and about 40-50 msec in the SA and 50-70 msec in the HA. There have been many efforts to clarify properties that differentiate these manner categories. Umeda, et $al^{1)}$ studied that the fundamental frequency at voice onset after both the UA and HA consonants was higher than that for the SA consonants, and the voice onset times were longest in the HA followed by the SA and UA. Han, et $al^{2)}$ reported in their speech synthesis and perception studies that the SA and UA stops differed primarily in terms of a gradual versus a relatively rapid intensity build-up of the following vowel after the stop release. Lee, et $al^{3)}$ measured both the intraoral and subglottal air pressure that the subglottal pressure was higher for the HA stop than for the other two stops. They also compared the dynamic pattern of the subglottal pressure slope for the three categories and found that the HA stop showed the most rapid increase in subglottal pressure in the time period immediately before the stop release. $Kagaya^{4)}$ reported fiberscopic and acoustic studies of the Korean stops. He mentioned that the UA type may be characterized by a completely adducted state of the vocal folds, stiffened vocal folds and the abrupt decreasing of the stiffness near the voice onset, while the HA type may be characterized by an extensively abducted state of the vocal folds and a heightened subglottal pressure. On the other hand, none of these positive gestures are observed for the SA type. Hong, et $al^{5)}$ studied electromyographic activity of the thyroarytenoid and posterior cricoarytenoid (PCA) muscles during stop production. He reported a marked and early activation of the PCA muscle associated with a steep reactivation of the thyroarytenoid muscle before voice onset in the production of the HA consonants. For the production of the UA consonants, little or no activation of the PCA muscle and earliest and most marked reactivation of the thyroarytenoid muscle were characteristic. For the SA consonants, he reported a more moderate activation of the PCA muscle than for the UA consonant, and the least and the latest reactivation of the thyroarytenoid muscle. Hong, et $al^{6)}$ studied the observation of the vibratory movements of vocal fold edges in terms of laryngeal gestures according to the different types of stop consonants. The movements of vocal fold edges were evaluated using high speed digital images. EGG signals and acoustic waveforms were also evaluated and related to the vibratory movements of vocal fold edges during stop production.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.28.4-29
• /
• 2011

Solar Proton Events (SPEs, ${\geq}\;10\;cm^{-1}s^{-1}sr^{-1}$ with >10 MeV) are very important for space weather forecasting. It is well known that they are associated with solar flares and/or CME-driven shocks. Especially, the CME-driven shocks have been observed as solar and interplanetary type II bursts. In this study, we estimated the occurrence probability of SPEs depending on three groups: (1) metric, (2) decameter-hectometric (D-H), and (3) meter-to-kilometric (m-to-km) type II bursts. For this work, we used SPEs and all available type II burst data in 1996-2004. The primary findings of this study are as follows. First, the majority (77%) of the m-to-km type II bursts are associated with SPEs and its probability is noticeably higher than D-H type II bursts probability strongly depend on longitude: eastern (0%), center(45%), and western (33%) for X-class associated metric type II bursts, eastern (15%), center (55%), and western (50%) for X-class associated D-H type II bursts, eastern (17%), center (77%), and western (64%) for X-class associated m-to-km type II bursts. Third, for m-to-km type II bursts, the SPE probability increases with CME speed: 400km/s${\leq}$V <1000km/s (36%), 1000km/s ${\leq}$V<1500km/s (40%), 1500km/s${\leq}$V (66%). Finally, we expect that these results will be used for setting up more reasonable solar proton event forecasting models.

• 소성∙가공
• /
• 제28권4호
• /
• pp.203-211
• /
• 2019

In this study, the weight of type IV pressure vessel is optimized through the burst pressure condition using the finite element analysis (FEA) based on the genetic algorithm (GA). The optimization design variables include the thickness of composite layers and the winding angles. The optimized design variables are validated using the numerical simulations for the pressure vessel. Consequently, the weight is decreased by about 6.5% as compared to the previously reported results for Type III pressure vessel. Additionally, a method which reduces the entire optimization time is proposed. In the original method, the population size is constant across all generations. However, the proposed method could reduce the workload through the reduction of the population size by half for every 25 generations. Thus, the proposed method is observed to increase the weight by about 0.1%, however, the working time for the optimization could be decreased by about 46.5%.

• Bulletin of the Korean Chemical Society
• /
• 제22권5호
• /
• pp.467-475
• /
• 2001

A triblock copolymer based on $poly(\varepsilon-caprolactone)$ (PCL) as the hydrophobic part and poly(ethylene glycol) (PEG) as the hydrophilic portion was synthesized by a ring-opening mechanism of ${\varepsilon}-caprolactone$ with PEG containing a hydroxyl group at bot h ends as an initiator. The synthesized block copolymers of PCL/PEG/PCL (CEC) were confirmed and characterized using various analysis equipment such as 1H NMR, DSC, FT-IR, and WAXD. Core-shell type nanoparticles of CEC triblock copolymers were prepared using a dialysis technique to estimate their potential as a colloidal drug carrier using a hydrophobic drug. From the results of particle size analysis and transmission electron microscopy, the particle size of CEC core-shell type nanoparticles was determined to be about 20-60 nm with a spherical shape. Since CEC block copolymer nanoparticles have a core-shell type micellar structure and small particle size similar to polymeric micelles, CEC block copolymer can self-associate at certain concentrations and the critical association concentration (CAC) was able to be determined by fluorescence probe techniques. The CAC values of the CEC block copolymers were dependent on the PCL block length. In addition, drug loading contents were dependent on the PCL block length: the larger the PCL block length, the higher the drug loading content. Drug release from CEC core-shell type nanoparticles showed an initial burst release for the first 12 hrs followed by pseudo-zero order release kinetics for 2 or 3 days. CEC-2 block copolymer core-shell type nanoparticles were degraded very slowly, suggesting that the drug release kinetics were governed by a diffusion mechanism rather than a degradation mechanism irrelevant to the CEC block copolymer composition.

• Journal of Forest and Environmental Science
• /
• 제14권1호
• /
• pp.89-100
• /
• 1998

본 연구는 제지 원료의 효율적 이용 및 기능의 최적화를 위한 수단으로 사용되고 있는 다층구조화에 따른 종이의 내부응력 및 물성의 변화를 조사하기 위하여 수행되었다. 또한 최근 사용량이 급증되고 있는 재생섬유를 다층구조에 도입할 경우 수반되는 종이의 물성 변화도 조사되었다. 펄프의 고해처리는 단층지의 내부응력을 증가시켜준 반면 충전제의 사용은 내부응력을 감소시켰다. 종이의 다층구조화는 인열지수를 제외한 대부분의 종이물성과 내부응력을 감소시켰으며, 이러한 변화는 사용된 펄프의 종류, 고해수준, 원료의 배합 방법에 따라 다양하게 나타났다. 충전시에는 충전제를 외층 또는 내층에 사용함으로써 단층지보다 우수한 내부응력 및 종이물성을 얻을 수 있었다. 재생섬유를 사용할 때는 다층구조화를 통하여 투기도와 빳빳이의 개선이 가능하였으나, 파열지수가 감소되었다.

• 한국음향학회지
• /
• 제31권3호
• /
• pp.151-160
• /
• 2012

초음파 의료 영상에서 탄성영상은 암과 같은 종양의 진단에 도움을 준다. 본 논문은 초음파 음향 복사력을 이용하여 관찰하고자 하는 연조직에 힘을 인가하여 탄성 영상을 구현하였다. 데이터 획득 시간을 줄이기 위하여 송신 집속을 하지 않고 버스트 (burst) 형태의 평면파를 송신하여 모든 영상 영역에 동시에 음향 복사력이 인가되도록 하였다. 균일 탄성팬텀을 이용한 실험에서 송신 집속을 하지 않고도, 송신 시간을 길게 함으로써 탄성 영상을 얻기에 충분한 음향 복사력을 얻을 수 있음을 확인하였다. 그러나 기존의 집속형 음향 복사력을 이용한 영상과는 다른 시간 대 변위 특성이 관찰되었다. 제안한 탄성 영상 기법으로 초음파 병변 탄성 팬텀과 소의 간 실험에서 병변을 구별할 수 있음을 확인하였다.

• 전력전자학회논문지
• /
• 제14권6호
• /
• pp.504-513
• /
• 2009

본 논문에서는 조명용 LED 구동 장치를 위한 새로운 방식의 LED 구동 모듈화 방법을 제안한다. 제안된 LED 구동 회로는 플라이백 컨버터를 이용하여 교류 입력 전원의 핫 접지와 LED 구동부의 콜드 접지를 절연한다. LED 전류 제어를 용이하게 하기위해 플라이백 컨버터를 동특성이 뛰어난 불연속 모드로 동작시키고, KIA2431을 이용하여 귀환 루프 제어를 한 후, 그에 대한 특성을 파악한다. 제안된 LED 구동 모듈은 폭넓은 교류 전원 입력 범위와 PWM 제어 IC를 직접 제어하여 버스트 디밍을 구현하고 넓은 범위의 LED 밝기 조절이 가능하게 하였다. 본 논문에서는 제안된 LED 구동 모듈에 대한 동작 원리를 설명하고 LED 구동 모듈을 실제로 구현 및 적용하여 제안된 구동 모듈의 유용성을 입증하였다. 또한, 소형화와 모듈화 된 LED 구동 모듈을 병렬로 연결한 다 채널 LED 구동 장치를 제안하고 그 타당성을 검증하였다.

• 전자공학회논문지SC
• /
• 제41권2호
• /
• pp.61-68
• /
• 2004

전기를 이용한 치아의 자극은 치수의 생활력 평가의 한 방법이다. 전기 치수 검사의 기본원리는 치아 내의 치수에 전류 자극을 가하여 유발되는 통증 유무로 치수의 생활력을 평가한다. 그러나 치아의 에나멜질의 임피던스가 크고 개인에 따라 차이가 많기 때문에 치아의 상태에 영향을 받지 않으면서 자극을 제어하기가 불가능하다. 대부분의 치수검사기가 전압 자극 방법을 사용하고 있어 개인에 따라 자극 역치 값이 크게 변화한다 그러므로 치아 에나멜질의 두께 차에 의해 발생하는 영향을 최소화하기 위해 정 전류 치수 검사기가 필요하다. 그리고 치아 임피던스에 관계없이 넓은 전류 범위를 갖는 치수 검사기가 필요하다. 본 연구에서는 전류 안정 회로를 사용하여 최대 150 uA의 전류와 통증을 완화하는 버스트 파형을 발생시킬 수 있는 정 전류원 치수 검사기를 개발하고 그 성능을 확인하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권4호
• /
• pp.201-205
• /
• 2004

The CCFL dimming control methods are generally used lamp current regulation or average current adjustment method feeding the CCFL inverter. Inverter operation frequency is higher than resonant frequency for safe operation. In this study, we design the half-bridge type series and parallel resonant converter circuit that switches at variable frequency modulation methods to control the output power. This method has advantages such as low EMI and reduced harmonics, and it is convenient for dimming control using a microprocessor. The validity of this study is confirmed from the simulation and experimental results.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 춘계학술대회
• /
• pp.198-202
• /
• 1992

In this paper, we have performed an experiment to obtain an optimized electric stimulation condition on the tip or a ringer skin. The desired parameters for stimulation of the finger tip skin are waveforms, frequency, stimulation intensity, duty cycle. As a result, when the finger skin was stimulated with monophasic, biphasic, and differntial phasic, the most appropriate condition was 200 to 250[Hz] in frequency, 10 to 25[%] in duty cycle. Burst type pulse was more sensitive effect than that of continuous pulse methode.