• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.854-858
• /
• 1987

This paper considers impulsive noise which produce burst error in high speed(approx.160Kbps) data transmission like ISDN(Integrated Servise Digital Network) using PSTN(Public Switching Telephone Network). To begin with, we obtains the transfer function of subscriber line to calculate the variation of bandwidth when the gain of receiver is fixed and channel capacity of non-gaussian channel in upper-and lower bound, and evaluates the transmission capability. In this paper compares channel capacity bounds which obtains when probability density function of impulsive noise is Laplacian distribution function with impulsive noise generated by waveform synthesier.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1403-1410
• /
• 1997

Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.49-52
• /
• 2003

OFDM(Orthogonal Frequency Division Multiplexing) scheme can compensate for distortions caused by multipath delay spread and reduce the burst errors caused by the Doppler effect since OFDM signals have long symbol durations. However, OFDM is required to be improved for high speed data transmission and large capacity. Therefore, coding schemes should be combined with OFDM. In this paper, it was studied that the performance of OFDM transmission scheme was improved in mobile communication channel by applying TCM, which has advantages of error correction and bandwidth efficiency. Simulation was carried out for two TCM models with different code efficient length. By mapping two models to square 16QAM, the model with the code efficient length of 2 achieved 3dB better than the other for the BER of 10/sub -3/. In conclusion, if we want to achieve a better performance with TCNA in OFDM applications, we should select a TCM with larger code efficient length.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.151-160
• /
• 2012

In medical ultrasound imaging, elasticity imaging helps to diagnose tumors such as cancer. This paper is concerned with the application of acoustic radiation force to soft tissue of interest to implement elasticity imaging. In order to reduce the data acquisition time, instead of relying on transmit focusing, a plane wave of burst type is transmitted to apply the acoustic radiation force simultaneously to an entire imaging region to be observed. A homogeneous phantom experiment confirms that increasing the transmit excitation duration instead of employing transmit focusing generates a high enough acoustic radiation force to obtain elasticity images. It is found, however, that a different displacement versus time characteristic is observed unlike the case of using a conventional focused acoustic radiation force. Experimental results obtained through the use of an ultrasound phantom and a bovine liver show that lesions can be correctly differentiated.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.269-274
• /
• 2008

For fitness-for-service analyses of underground natural gas pipelines, engineering assessment methods against possible defects need to be developed. The assessment methods for high pressure pipeline of KOGAS, was developed using the full size pipe burst tests and the finite element analysis. It included the defect assessment methods for a single and multi-corrosion, corrosion in girth welding part, corrosion in seam welding part, the mechanical damage defects as dent and gouge, crack and large plastic deformation of API 5L X65 pipe. In addition, we developed method to assess pipeline integrity by internal and external load to buried pipeline. Evaluation results were compared with other methods currently being applied to the gas pipeline. The program of Windows environment is made for easily using assessment methods. It provides a consistent user interface, so non-professional technician can easily and friendly use the FFS program from company intranet. Several evaluation programs is easily installed using one installer. Each program constitutes a common input interface and the output configuration program, and evaluation result store and can be recalled at any time. The FFS program based on independent evaluation method is used to evaluate the integrity and safety of KOGAS pipeline, and greatly contribute to safe and efficient operation of pipeline. This paper presents experimental, analytical and numerical investigations to develop the FFS methods for KOGAS pipeline, used as high pressure natural gas transmission pipeline within KOREA. Also, it includes the description of the integrated program for FFS methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1490-1500
• /
• 1996

One of the important issues for multimedia communications over ATM netowrks is efficient use of net-work resources since transmitting video at low cost requires high utilization of channel bandwidth. In this paper, we propose an effective bandwidth estimation scheme for MPEG sources in ATM networks. It has been known difficult to allocate effective transmission bandwidth to MPEG sources due to its bursty charactersitics. The MPEG traffic stream can bemodeled using five traffic parameters:service rate, burst load ratio, interburst load ratio, burst period, and interburst period. Using these parameters, a transmission bandwidth for each source can be estimated, and the estimated bandwidth is applied synchronously to reduce the queue size in a buffer. For a simple network modelof a high speed link that multiplexes a number of virtual-circuit connections, simulations on adaptive bandwidth allocation were performed, and the results show that the queueing delay is significantly reduced, when compared to a fixed bandwidth allocation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.583-591
• /
• 2011

We presents the architecture of the 2.5 Gbps hybrid PON link which can increase of the transmission distance and link capability, and split ratio by using a colorless DWDM-PON and O/E/O based reach extender into an existing G-PON link. A RSOA based DWDM-PON to apply the feeder fiber can provide a link capacity of 32 larger that of a legacy G-PON. The reach extender converts the wavelength of DWDM-PON to G-PON through GTC frame regeneration at the remote node, and can provide a burst reset signal in order to extract upstream burst signal, simultaneously. The proposed hybrid PON enable a legacy G-PON to operate over the maximum 60 km distance with a 128-way split per WDM wavelength.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.771-776
• /
• 2010

In this paper, we present an efficient centralized dynamic bandwidth allocation scheme with multicasting for asymmetric 10G-Ethernet Passive Optical Networks (10G-EPONs). The proposed scheme is based on multicast-burst polling and provides quality of service (QoS) with class of service (CoS) to different lasses of packets. It is shown that a well-known conventional interleaved polling scheme severely decreases downstream channel capacity for user traffic when the upstream network load is low (avalanche gate frequency). To overcome this problem, we have proposed a multicast burst polling scheme which shows impressively lower downstream bandwidth consumption compare to IPACT and moreover it did not show the light load penalty problem. Simulation results using an OPNET tool show that the multicast burst polling effectively eliminates light-load penalty and minimizes downstream bandwidth consumption under avalanche gate frequencies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.99-108
• /
• 1999

In this paper, we propose $\pi$/4 QPSK scheme with block modulation algorithm, which can reduce preamble in order to transmit ATM cell efficiently in the uplink channel of LMDS, and also designed a new carrier recovery circuit which can improve carrier synchronization performance of block demodulation algorithm. The $\pi$/4 QPSK scheme employing the proposed block modulation algorithm achieved efficient frame transmission by making use of a few preamble when carrier synchronization, symbol timing synchronization and slot timing synchronization were performed by burst data of ATM cell in LMDS environment. For performance evaluation of the proposed method, a simulation analyzing the variation of carrier synchronization, symbol timing synchronization and slot timing synchronization using LMDS environment and burst mode condition was executed. In the simulation, the proposed method showed a good performance even though the reduced preamble as a few aspossible when carrier synchronization, symbol timing synchronization and slot timing synchronization is performed.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.101-114
• /
• 2002

The real multimedia application in wide area communication needs the guaranteed performance of communication service. Therefore, the resource is reserved at the moment of traffic burst and the region of connection admission possibility is widened at the basis of maximum cell rate. This of study shows that the end-to-end traffic delay to the traffic of burst state is guaranteed when the total of maximum transmission rate is higher than link speed by using the region of deterministic delay. The network load rate of connection admission can be improved by the inducement of delay bounds consideration each traffic characteristic to guarantee the end-to-end delay of network from single switch. This suggested buffering system using deterministic service do not give any influence to service quality and can guarantee the bounds of end-to-end delay. And it can also reduce the load of network even if the delay is increased according to the burst traffic characteristic. The above suggested system can be applied effectively to the various kinds of general network specification which admit both real time trafnc service and non-real time traffic service.