• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.441-446
• /
• 2006

In recent years, WDM networks have received much attention as the Internet backbone networks because of the explosive growth of the Internet IP-based traffic. The Optical Burst Switching (OBS) has been proposed as an effective optical switching technology in the WDM networks. The OBS has the advantages in 1) the high usage rate of the bandwidth, and 2) no necessity of optical buffer. However, the OBS has the burst-contention problem in the networks. The deflection routing is proposed as one of means to solve this problem. In this paper, we propose a new routing method to minimize burst loss in the deflection routing based networks. In addition, we propose a QoS control method using a new routing algorithm. Finally, we show the variety of the proposed methods by computer simulations.

• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.623-627
• /
• 2011

This is a study on the distribution of acoustic emission parameters during a burst test for a type-II CNG vehicle fuel tank. A resonant AE sensor with a central frequency of 150 kHz was attached to the composite materials in the center of the fuel tank. The pressure was increased from 30 to 100% of the expected burst pressure and was maintained for 10 minutes at each level. Damage at 70% of expected burst pressure occurred by various damage mechanisms including fiber breakage and delamination, while that of below 60% only occurred by matrix crack initiation and growth. The count, duration and rise time of the AE signal at 60% of the expected burst pressure are distributed below 500, 5000 ${\mu}s$ and 300 ${\mu}s$, respectively. Then, at above 70% they increased with pressure by superimposing of individual AE signal generated at a nearby place. These results confirmed that the analysis of the distribution of AE parameters is an effective tool for estimating damage of a CNG fuel tank.

• Journal of fish pathology
• /
• v.12 no.1
• /
• pp.1-6
• /
• 1999

The immunostimulating effect of aloe on respiratory burst activity was investigated by measurements of the chemiluminescent responses (CL) of olive flounder (Paralichthys olivaceus) kidney phagocytes in vitro. The phagocytes incubated with 0.5 and $1{\mu}g/ml$ of aloe for 24 hours showed significantly increased respiratory burst activities compared to control. The result of this study suggests that aloe can be used as an immunostimulant for olive flounder culture.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.3
• /
• pp.435-451
• /
• 2015

Evaluation of the performance of aging structures is essential in the oil and gas industry, where the inaccurate prediction of structural performance can have significantly hazardous consequences. The effects of structure failure due to the significant reduction in wall thickness, which determines the burst strength, make it very complicated for pipeline operators to maintain pipeline serviceability. In other words, the serviceability of gas pipelines and elbows needs to be predicted and assessed to ensure that the burst or collapse strength capacities of the structures remain less than the maximum allowable operation pressure. In this study, several positions of the corrosion in a subsea elbow made of API X42 steel were evaluated using both design formulas and numerical analysis. The most hazardous corrosion position of the aging elbow was then determined to assess its serviceability. The results of this study are applicable to the operational and elbow serviceability needs of subsea pipelines and can help predict more accurate replacement or repair times.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.1
• /
• pp.28-35
• /
• 2021

The flow accelerated corrosion (FAC) is one of significant aging and degradation mechanism and can affect structural integrity of CANDU feeder pipes. Pipe burst can occur under normal operation pressure (min. 10 MPa) if wall-thinning of the feeder pipe due to FAC is accumulated. Previous studies considered simple shapes of feeder pipe with local wall-thinning in order to conservatively assess structural integrity of wall-thinned feeder pipe. In this paper, a new FE model is developed, having an actual shape of the feeder pipe (double bent) as well as the actual wall-thinning shape and location based on the in-service inspection result. Then, the burst pressure assessment of the wall-thinned feeder pipe is performed using lower bound limit load analysis considering elastic-perfectly plastic material. In addition, an improved formulation to predict the burst pressure of the wall-thinned feeder pipe is presented and the safety margin is compared with an existing assessment method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.19-27
• /
• 2016

Nowadays the adaptive buffering techniques for burst stream packet configuration and its operation algorithm to save energy in IP core network have been studied. This paper explains the selection method of packet buffering interval for energy saving when configuring burst stream packet at the ingress router in IP core network. Especially the adaptive buffering interval and its implementation scheme are required to improve the energy saving efficiency at the input part of the ingress router. In this paper, we propose the best adaptive buffering scheme that a current buffering interval is adaptively buffering scheme based on the input traffic of the past buffering interval, and analyze its characteristics of energy saving and end-to-end delay by computer simulation. We show the improvement of energy saving effect and reduction of mean delay variation when using an appropriate inverse-function selecting the buffering interval for the configuration of burst stream packet in this paper. We confirm this method have superior properties compared to other method. The proposed method shows that it is less sensitive to the various input traffic type of ingress router and a practical method.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.2
• /
• pp.122-128
• /
• 2016

Objective : To illustrate the technique of single-stage posterior subtotal corpectomy and circumferential reconstruction for the treatment of unstable thoracolumbar burst fractures and to evaluate the radiographical and clinical outcomes of patients treated using this technique. Methods : 16 consecutive patients with unstable thoracolumbar burst fractures were treated with single-stage posterior subtotal corpectomy and circumferential reconstruction. The mean patient age was 54.8 years. The mean follower up period was 25 months. Five patients suffered from T12 fractures, 10 from L1, 1 from L2. The segmental kyphosis, neurologic status, visual analogue scale for back pain was evaluated before surgery and at follow up. Results : The segmental kyphotic angle improved from 18.5 degrees before surgery to -9.2 degrees at the last follow up. The mean correction angle was 28.9 degrees. The mean surgical time was 255 minutes, and a mean intraoperative blood loss was 1073 mL. Intraoperative complications included two dural tears, and a superficial wound infection. There were no other severe complications. The mean visual analog scale of back pain decreased from a mean value of 6.6 to 2 at the last follow up. Conclusion : The single-stage posterior subtotal corpectomy and circumferential reconstruction achieved satisfactory kyphosis correction with direct visualization of the circumferentially decompressed spinal cord, as well as good fusion with less blood loss and complications. It is a safe and reliable surgical treatment option for unstable thoracolumbar burst fractures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1088-1097
• /
• 1999

In this paper we describe our investigation en ATM CLR(Cell Loss Rate) in the wireless ATM Networks, which consist of wireless access nodes and wireless links. A wireless access node is modelled as the ND/D/1queue. A wireless channel is modelled as channel with single and burst error characteristics, and it can be seen that the CLR degrades on a link with burst errors than on a link with single error. Because wireless channel can be approximated as the Rayleigh or Rician fading channel and wireless communication systems are power limited, it is customary that the CLR degrades on a link with burst errors than on a link with single error. So error control method should be used to improve performance degradation caused by burst errors. We consider the forward error correction(FEC) as error control scheme for CBR traffics to improve performance degradation caused by burst errors, and analyze performance of concatenated FEC scheme through the use of CLR.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.8
• /
• pp.1055-1062
• /
• 2000

Objectives : Burst fracture of the lower lumbar spine(L3-L5) is rare and has some different features compare to that of thoracolumbar junction. Lower lumbar spine is flexible segments located deeply, and has physiologic lordosis. All of these contribute to making surgical approach difficult. Generally, lower lumbar burst fracture is managed either anteriorly or posteriorly with various fixation and fusion methods. But there is no general guideline or consensus regarding the proper approach for such lesion. We have tried to find out the influencing factors for selecting the surgical approach through the analysis of lower lumbar burst fractures treated for last 4 years(1994.3-1998.3). Method : This study includes 15 patients(male : 10, female : 5, age range 20-59 years with mean age of 36.7 years, L3 : 8 cases, L4 : 5 cases, L5 : 2 cases). Patients were classified into anterior(AO) and posterior operated(PO) groups. We investigated clinical findings, injured column, operation methods, and changes in follow-up radiologic study (kyphotic angle) to determine the considerable factors in selecting the surgical approaches. Results : There were 5 AO and 10 PO patients. Anterior operation were performed with AIF with Kaneda or Z-plate and posterior operation were done with pedicle screw fixation with PLIF with cages or posterolateral fusion. Canal compression was 46.6% in AO and 38.8% in PO. The degree of kyphotic angle correction were 10.7 degree(AO) and 8.5 degree(PO), respectively. There was no statistical difference between anterior and posterior operation group. All patients showed good surgical outcome without complications. Conclusion : Anterior operation provided good in kyphotic angle correction and firm anterior strut graft, but it difficulty arose in accessing the lesions below L4 vertebra. While posterior approach showed less correction of kyphotic angle, it required less time and provided better results for accompanied adjacent lesion and pathology such as epidural hematoma. The level of injury, canal compression, biomechanics, multiplicity, and pathology are considered to be important factors in selection of the surgical approach.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.4
• /
• pp.353-358
• /
• 2012

Objective : The purpose of this study was to determine the efficacy of bone cement-augmented short segment fixation using percutaneous screws for thoracolumbar burst fractures in a background of severe osteoporosis. Methods : Sixteen patients with a single-level thoracolumbar burst fracture (T11-L2) accompanying severe osteoporosis treated from January 2008 to November 2009 were prospectively analyzed. Surgical procedures included postural reduction for 3 days and bone cement augmented percutaneous screw fixation at the fracture level and at adjacent levels without bone fusion. Due to the possibility of implant failure, patients underwent implant removal 12 months after screw fixation. Imaging and clinical findings, including involved vertebral levels, local kyphosis, canal encroachment, and complications were analyzed. Results : Prior to surgery, mean pain score (visual analogue scale) was 8.2 and this decreased to a mean of 2.2 at 12 months after screw fixation. None of the patients complained of pain worsening during the 6 months following implant removal. The percentage of canal compromise at the fractured level improved from a mean of 41.0% to 18.4% at 12 months after surgery. Mean kyphotic angle was improved significantly from $19.8^{\circ}$ before surgery to 7.8 at 12 months after screw fixation. Canal compromise and kyphotic angle improvements were maintained at 6 months after implant removal. No significant neurological deterioration or complications occurred after screw removal in any patient. Conclusion : Bone cement augmented short segment fixation using a percutaneous system can be an alternative to the traditional open technique for the management of selected thoracolumbar burst fractures accompanied by severe osteoporosis.