• Title/Summary/Keyword: Burst

Search Result 1,584, Processing Time 0.028 seconds

A Burst Error Correction Decoding Algorithm in TCM on Mobile Communications (이동통신에서 TCM의 연집에러 정정을 위한 복호방식)

  • 이영천;김종일;이명수;홍대식;강창언
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.17 no.9
    • /
    • pp.1020-1028
    • /
    • 1992
  • In this paper, a burst-error-correcting adaptive decoding in TCM(Trellis Coded Modulation) is presented that combines maximun-likelihood decoding with a burst error detection scheme. The decoder usually operates as a Viterbi decoder and switches to a burst-error-correcting mode whenever error patterns uncorrectable by Viterbi decoder are detected. It is demonstrated that TCM using adaptive decoding method outperforms a traditional TCM on the multi-path fading channels that are busty in nature, which are like the channel environments of mobile communications.

  • PDF

Novel 622Mb/s Burst-mode Clock and Data Recovery Circuits with the Muxed Oscillators (Muxed Oscillator를 이용한 622Mbps 버스트모드 클럭/데이터 복원회로)

  • 김유근;이천오;이승우;채현수;류현석;최우영
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.8A
    • /
    • pp.644-649
    • /
    • 2003
  • Novel 622Mb/s burst-mode clock and data recovery (CDR) circuits with muxed oscillators are realized for passive optical network (PON) application. The CDR circuits are implemented with 0.35$\mu\textrm{m}$ CMOS process technology. Lock is accomplished on the first data transition and data are sampled in the optimal point. The experimental results show that the proposed CDR circuits recover the incoming 400Mbps-680Mbps burst mode input data without error.

Analysis of Burst Pressure for Wear-Damaged Steam Generator Tubes (마멸에 의해 손상된 증기발생기 전열관의 파열압력 해석)

  • Shin, Kyu-In;Park, Jai-Hak
    • Journal of the Korean Society of Safety
    • /
    • v.18 no.4
    • /
    • pp.16-22
    • /
    • 2003
  • Generally the rupture of steam generator tubes proceeds from significant plastic deformation before failure. In this study, the burst pressures of damaged steam generator tubes were calculated from the plastic instability analysis with the finite element method. Two wear types, flat and circumferential types were considered. An equation for the burst pressure was proposed by using the strength reduction factor and the Svensson equation. The analysis results were compared with the experiment data from published references and they showed a good agreement with the experiment data.

The Performance Analysis of Burst Error Elimination CVDF Algorithm Using Switching Remote Direction Finding Antenna in VHF (VHF대역에서 원격운용 방향탐지안테나 소자의 스위칭에 의한 상관벡터방향탐지 버스트에러 제거 알고리즘 성능분석)

  • Won, Jong-Mook
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.10 no.3
    • /
    • pp.129-138
    • /
    • 2007
  • Recently, Direction Finding(DF) System is using switching DF algorithm to reduce system-weight by eliminating RF cable as much as possible. Also, Correlation Vector Direction Finding(CVDF) algorithms is being used for Fast Direction finding in tactical environment. In this paper, I will give you burst error elimination algorithms and compare the performance in case we use switching CVDF algorithm. Although antenna array is not working, we will successfully perform direction finding when we use this burst error elimination algorithms. Also, we will be completely capable of DF mission despite of meeting the unwanted situation that the monitoring signal disappear in case we use Switching Direction Finding algorithms. That situation frequently occurs under the Frequency Hopping signal circumstances.

A comparison of w-lan and i_Burst for building broadband and wireless data access service systems (Wireless LAN과 i_Burst의 광대역 무선 이동 서비스 시스템 구축 비교)

  • Lee, Ho-Gyun;Kim, Kwang-Il;No, Young-Tae;Lee, Sun-Hong;Park, Sin-Hu
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2002.04b
    • /
    • pp.1471-1474
    • /
    • 2002
  • 광대역 무선 이동 서비스의 사용자 요구가 증대됨에 따라 기존에 서로 다른 제품군이라고 생각했던 통신 서비스간의 충돌이 예상되고 있다. 무선랜과 기존 이동 통신시스템의 진화본인 HDR, 그리고 스마트 안테나 기술로 유명한 ArrayComm 에서 새롭게 내놓은 I_Burst 가 광대역 무선 이동 서비스 시스템으로 고려되고 있다. 본 논문에서는 기존의 무선랜을 이용한 시스템의 장, 단점을 정리하고 새롭게 제안된 i_Burst의 기술적 특징과 기존 시스템과 대비되는 장점들을 정리하고 있다.

  • PDF

Fabrication of 2.5 Gbps Burst-mode Receiver and its Full Compliance to GPON

  • Lee, Mun-Seob;Lee, Byung-Tak;Kim, Jong-Deog;Lee, Dong-Soo
    • Journal of the Optical Society of Korea
    • /
    • v.12 no.4
    • /
    • pp.355-358
    • /
    • 2008
  • In the current GPON market and standard, the line bit rate requirement is changing from 1.25 Gbps to 2.5 Gbps. We fabricate a 2.5 Gbps burst-mode receiver with commercially available blocks and optimize it with an APD bias control. A burst-mode measurement setup is made for the full compliance test with the GPON standard. The device meets the partially defined 2.5 Gbps specs in the current ITU G.984.2 standard, also, supports 1.25 Gbps specs for the coexistence issue in an access network. The full-compliant measurement values can be used as a guideline for fixing "for further study" specs in the current GPON standard at 2.5 Gbps.

Design and Performance Analysis of Burst Structure for TDMA-based Next Generation Satellite Return Link Transmission (TDMA 기반의 차세대 위성리턴링크 버스트 구조 설계 및 성능 분석)

  • Han, Jae-Hee;Kim, Pan-Soo;Chang, Dae-Ig
    • Journal of Satellite, Information and Communications
    • /
    • v.4 no.2
    • /
    • pp.34-38
    • /
    • 2009
  • This paper is related with optimum burst structure design for high efficient TDMA satellite return link transmission. In general, some typical burst structure for data transmission is composed of a pair of preamble and traffic data in the DVB-RCS (Digital Video Broadcasting. Return Channel via Satellite) and IPOS (IP over Satellite) standard. This structure has some difficulties to increase spectral efficiency that it requires a large of preamble length, high SNR environment, or receiver complexity. To cope with them, burst structure with distributed pilot symbol can be used to alleviate the residual frequency offset effect by calculating accurate frequency offset than conventional one. In particular, we investigate some relevant to proposed distributed pilot structure, previously and analyze their strong points/drawbacks in terms of synchronization to draw the most appropriate one.

  • PDF

Performance of Prioritized Service Discipline based on a Hop Count for Optical Burst Wireless Switched Networks (홉 기반의 우선처리를 고려한 광버스트 무선 교환방식의 성능분석)

  • Kim, Dong-Ok;Yoon, Hong
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.1
    • /
    • pp.34-39
    • /
    • 2005
  • In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical Wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop count. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose the Just Enough Time(JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the burst blocking probability and the link utilization.

Comparative Study of Brain Protection Effect between Thiopental and Etomidate Using Bispectral Index during Temporary Arterial Occlusion

  • Kim, Tae-Kwan;Park, Ik-Seong
    • Journal of Korean Neurosurgical Society
    • /
    • v.50 no.6
    • /
    • pp.497-502
    • /
    • 2011
  • Objective : This study was conducted to compare the effect of etomidate with that of thiopental on brain protection during temporary vessel occlusion, which was measured by burst suppression rate (BSR) with the Bispectral Index (BIS) monitor. Methods : Temporary parent artery occlusion was performed in forty one patients during cerebral aneurysm surgery. They were randomly assigned to one of two groups. General anesthesia was induced and maintained with 1.5-2.5 vol% sevoflurane and 50% $N_2O$. The pharmacological burst suppression (BS) was induced by a bolus injection of thiopental (5 mg/kg, group T) or etomidate (0.3 mg/kg, group E) according to randomization prior to surgery. After administration of drugs, the hemodynamic variables, the onset time of BS, the numerical values of BIS and BSR were recorded at every minutes. Results : There were no significant differences of the demographics, the BIS numbers and the hemodynamic variables prior to injection of drugs. The durations of burst suppression in group E ($11.1{\pm}6.8$ min) were not statistically different from that of group T ($11.1{\pm}5.6$ min) and nearly same pattern of burst suppression were shown in both groups. More phenylephrine was required to maintain normal blood pressure in the group T. Conclusion : Thiopental and etomidate have same duration and a similar magnitude of burst suppression with conventional doses during temporary arterial occlusion. These findings suggest that additional administration of either drug is needed to ensure the BS when the temporary occlusion time exceed more than 11 minutes. Etomidate can be a safer substitute for thiopental in aneurysm surgery.