• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1064-1067
• /
• 2001

Micro drilling is used in the production of fuel injection nozzle, watch, camera, air bearing and pinted circuit boards(PCB) are demanded for high precision. Recently industries of precision production require more small hole, high aspect ratio and high speed working for micro deep hole drilling. But the undesirable characteristics of micro drilling is the small signal to noise ratios, wandering motion of drill, high aspect ratio and the increase of cutting force as cutting depth increase. So in this paper to obtain the optimization of cutting condition a study on the characteristics of micro deep hole drilling used Tool dynamometer is proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.5
• /
• pp.7-13
• /
• 2010

The integrity and accuracy of the drilling hole are decided by positional error, diameter error, the roundness, the straightness, the cylindericity, size of the burr, the surface roundness and others. Among these parameters, positional error and diameter error have the most important parameters. The diameter error has been widely studied, but there has been little research done about the positional error due to the difficulty of measuring it. The measurement of hole location and diameter would be performed by CMM(Coordinate Measurement Machine). However, the usage of CMM requires much time and cost. In order to overcome the difficulties, we have developed a hole location and diameter error measuring device using machine vision. The developed measurement device attached to a CNC machine can determine hole quality quickly and easily.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.3
• /
• pp.195-198
• /
• 2009

Objective : Medpor porous polyethylene was used to reconstruct small bone defects (gaps and burr holes) along a craniotomy bone flap. The feasibility and cosmetic results were evaluated. Methods : Medpor Craniotomy Gap Wedges, V and T, were designed. The V implant is a 10 cm-long wedge strip, the cross section of which is an isosceles triangle with a 4 mm-long base, making it suitable for gaps less than 4 mm after trimming. Meanwhile, the Medpor T wedge includes a 10 mm-wide thin plate on the top surface of the Medpor V Wedge, making it suitable for gaps wider than 4 mm and burr holes. Sixty-eight pterional craniotomies and 39 superciliary approaches were performed using the implants, and the operative results were evaluated with respect to the cosmetic results and pain or tenderness related to the cranial flap. Results : The small bone defects were eliminated with less than 10 minutes additional operative time. In a physical examination, there were no considerable cosmetic problems regarding to the cranial bone defects, such as a linear depression or dimple in the forehead, anterior temporal hollow, preauricular depression, and parietal burr hole defect. Plus, no patient suffered from any infectious complications. Conclusion : The Medpor Craniotomy Gap Wedge is technically easy to work with for reconstructing small bone defects, such as the bone gaps and burr holes created by a craniotomy, and produces excellent cosmetic results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.211-212
• /
• 2006

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.101-106
• /
• 2003

Recent electronic equipment becomes smaller, more functional, and more complex. According to these trends, LTCC(low temperature co-fired ceramic) has been emerged as a promising technology in packaging industry. It consists of multi-layer ceramic sheet, and the circuit has 3D structure. In this technology via hole formation plays an important role because it provides an electric path for the packaging interconnection network. Therefore via hole quality is very important for ensuring performance of LTCC product. Via holes are formed on the green sheet that consists of ceramic(before sintering) layer and PET(polyethylene Terephthalate) one. In this paper we found the correlation between hole quality and process condition such as ceramic thickness, and tool size. The shear behavior of double layer sheet by micro hole punching which is different from that of single layer one was also discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.253-254
• /
• 2009

• Journal of the KSME
• /
• v.30 no.1
• /
• pp.29-35
• /
• 1990

본 글에서는 드릴링 작업의 가공정밀도 개선방안에 관하여 살펴보았다. 그러나 이러한 결과들은 현재 산업계에서 그 필요성이 점증하고 이는 small-deep hole 드릴링에 적용하기 위하여는 앞으 로도 계속 연구가 진행되어야 하며 특히 (1) 칩의 처리 문제, (2) Burr의 처리 문제, (3) 작업 상태에서 드릴휨의 모델링 등의 분야에 대한 연구가 선행되어야 할 것이다.

• Transactions of Materials Processing
• /
• v.14 no.3 s.75
• /
• pp.277-281
• /
• 2005

LTCC(Low temperature co-fired ceramic) is being recognized as a significant packaging material of electrical devices for the advantages such as relatively low temperature being needed for process, low conductor resistance and high printing resolution. In the process of LTCC electrical devices, the punched via-hole quality is one of the most important factors on the performance of the device. However, its mechanism is very complicated and optimization of the process seems difficult. In this paper, to clarify the process, via-hole punching experiments were carried out and the punched holes were examined in terms of their burr formation. The effects of thickness of PET sheet, ceramic sheet and punch-to- die clearance on via-hole quality were also discussed. Optimum process conditions are proposed and a factor $\kappa$ is introduced to express effect of the process variables.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.4
• /
• pp.266-270
• /
• 2015

Objective : Chronic subdural hematoma (CSDH) is one of the most frequent problems encountered in neurosurgery. Although burr-hole trephination is widely performed to treat CSDH, the incidence rate of recurrent CSDH is still 2-37%. The goal of this study is to determine the risk factors that affect recurrent CSDH. Methods : A total of 182 patients were included in this study who underwent burr-hole trephination. The clinical factors and radiographic features between the recurrence and the no recurrence groups were analyzed to find the parameters related to the postoperative recurrence of CSDH. Results : For the recurrence of CSDH that occurred in 25 patients (13.7%), among various risk factors, pre and postoperative midline displacements, which are more than 10 mm (p=0.000), and preoperative hemiparesis (p=0.026) had contributed to recurrent CSDH with statistical significance by univariate analysis. Unilateral CSDH were more frequently related to recurrent CSDH (16.3%), although it was not a statistical significant result (p=0.052). Furthermore, preoperative midline displacement only had statistical meaning for the recurrence of CSDH by multivariate analysis. Conclusion : This study indicates that the midline displacement on the preoperative computed tomography scan is the only independent predictor for the recurrence of CSDH.

• Journal of Korean Neurosurgical Society
• /
• v.40 no.4
• /
• pp.262-266
• /
• 2006

Objective : Chronic subdural hematoma[CSDH] is usually treated by burr hole trephination and hematoma evacuation with closed drainage and the surgical result is relatively good in most reported series. But, some patients experience the recurrence of CSDH. We study the clinical factors related to the recurrence of CSDH. Methods : 213 consecutive patients with CSDH who were treated with burr hole trephination and hematoma evacuation with closed drainage. The medical records, radiologic findings were reviewed retrospectively and clinical factors associated with the recurrent CSDH were analysed statistically. Results : 8.4%[18 cases] of the 213 patients who were treated due to CSDH were recurred. The demographic variables such as age, sex, coexisting diseases were not related to the recurrence. The preoperative hematoma thickness and postoperative hematoma thickness were not associated with the recurrence. The only factor related to the recurrence is postoperative hematoma density in this study. Conclusion : This study shows that postoperative hematoma density was strongly related to the recurrence of CSDH. However, several factors associated with the recurrent CSDH were reported in the liletrature. Thus, further study will be needed to uncover the factors related to the recurrence of CSDH.