Browse > Article

On-Machine Measurement System Development of Hole Accuracy using Machine Vision  

Kim, Min-Ho (Division of Mechanical System Engineering, Chonbuk Univ.)
Kim, Tae-Yeong (Division of Mechanical System Engineering, Chonbuk Univ.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.27, no.5, 2010 , pp. 7-13 More about this Journal
Abstract
The integrity and accuracy of the drilling hole are decided by positional error, diameter error, the roundness, the straightness, the cylindericity, size of the burr, the surface roundness and others. Among these parameters, positional error and diameter error have the most important parameters. The diameter error has been widely studied, but there has been little research done about the positional error due to the difficulty of measuring it. The measurement of hole location and diameter would be performed by CMM(Coordinate Measurement Machine). However, the usage of CMM requires much time and cost. In order to overcome the difficulties, we have developed a hole location and diameter error measuring device using machine vision. The developed measurement device attached to a CNC machine can determine hole quality quickly and easily.
Keywords
On-Machine Measurement; Hole Accuracy; Drilling; Machine Vision;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kahng, C. H. and Ham, I., "A Study on Sequential Quality Improvment in Hole-Making Process," Annals of the CIRP, Vol. 24, No. 1, pp. 27-32, 1975.
2 Choi, J. P., Min, B. K. and Lee, S. J., "Machining Accuracy Improvement by On Machine Part Measurement and Error Compensation," J. of the KSPE, Vol. 20, No. 12, pp. 34-41, 2003.   과학기술학회마을
3 Ei-Tammimi, A. and Darwish, S. M., "Geometric accuracies of NC and conventionally drilled holes," Journal of Materials Processing Technology, Vol. 75, No. 1, pp. 111-116, 1998.   DOI   ScienceOn
4 Kaminski, J. and Crafoord, R., "Position Accuracy of Drilled Holes," Annals of the CIRP, Vol. 40, No. 1, pp. 503-506, 1991.   DOI   ScienceOn
5 Lehtihet, E. A., Gunasena, U. N. and Weill, R., "Statistical Models for the Relationship between Production Errors and the Position Tolerance of a Hole," Annals of the CIRP, Vol. 39, No. 1, pp. 569-572, 1990.   DOI   ScienceOn
6 Wang, K., "Drilling Process Evaluation by Predicitng Drilled Hole Quality and Drill Bit Wear With On-Line Acoustic Emission Signals," Oregon State University, 1997
7 Kim, M.-H., "A Study on Vision Measurement System and Dynamic Signal Analysis for Improving Hole Accuracy in Drilling," Ph.D. Thesis, Department of Precision Mechanical Engineering, Chonbuk National University, 2009.
8 Kim, S. H. and Kim, D. H., "On-the-Machine Measurement System," J. of the KSPE, Vol. 18, No. 16, pp. 9-18, 2001.