• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.138-146
• /
• 1997

The optimal drill helix angle, point angle, and cutting conditions are recommended in the study so as to maximize the drilling performance by investigating the experimental reaults concerning with the state of chip formation, roundness of machined holes, and geometry of projected burr at hole exit, which are examined under the conditions of various helix angles, drill point angles of twist drill, cutting speeds, and feeds in operional parameters. In the easiness of chip escape, the helical type of chip is producted when a helix angle is 30$^{\circ}$, drill point angle 118$^{\circ}$, 140$^{\circ}$and feed is st between 0.1 and 0.15mm/rev. Roundness of machined hole is improved when the helix angle is 37$^{\circ}$, drill point angle is 118$^{\circ}$, and feed is 0.15mm/rev. The height of projected burr at the button of machined hole increases when the drill point angle and helix angle becomes large.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.773-776
• /
• 2005

An Experiment was carried out to study deburring in frilling hole on the Inclined exit surface. Two different deburring tools, exit surface angles, materials and cutting conditions were selected to check their performance using CNC machining center. In deburring operation, there are not only flat exit surfaces but also inclined exit surfaces which is described as inclination angle. Inclination of exit surface causes a quite different burr formation when comparing with flat surface. Deburring characteristics are analyzed according to the deburring tools and cutting conditions. Several strategies for a effective deburring on inclined exit surface were proposed.

• 소성∙가공
• /
• 제13권1호
• /
• pp.65-71
• /
• 2004

Recent electronic equipment becomes smaller, more functional, and more complex. According to these trends, LTCC(low temperature co-fired ceramic) has been emerged as a promising technology in packaging industry. It consists of multi-layer ceramic sheet, and the circuit has 3D structure. In this technology via hole formation plays an important role because it provides an electric path for the packaging interconnection network. Therefore via hole qualify is very important for ensuring performance of LTCC product. Via holes are formed on the green sheet that consists of ceramic(before sintering) layer and PET(polyethylene terephthalate) one. In this paper we found the correlation between hole quality and process condition such as PET thickness and ceramic thickness. The shear behavior of double layer sheet by micro hole punching which is different from that of single layer one was also discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.269-270
• /
• 2007

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.200-207
• /
• 2001

Burrs farmed in drilling are classified into three types, no burr, burrs with cap, teared burr. To control burr size in drilling, the second type burrs with cap are to be formed because it is small and uniform. It is necessary to understand the mechanism of cap formation to derive the burr formation into second type burr with cap. In several materials. second type burrs are formed in drilling by changing cutting conditions. It is observed that cap is formed as a result of the plastic deformation along the outside of exit hope. According to the tension behavior of the material in concentrated region between hole and drill outside edge, the geometry of burr with cap is determined. Simplified 2D FEM analysis shows good prediction for burr formation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1294-1298
• /
• 2005

In this study, combined micro press and surface finishing process are proposed to fabricate the micro nozzle array on a stainless steel sheet metal. In micro hole punching process the burr occurs inevitably, but the burr must be minimized in order to improve the quality and accuracy of the product. For this reason, subsequent magnetic field-assisted finishing technique is applied to remove the burr which exists around the nozzles for ink-jet printer head and proved to be a feasible for deburring by experiment. The deburring characteristics of sheet metals were investigated changing with polishing time and magnetic abrasive size. After the deburring, the burr size has remarkably reduced and roundness of the hole also has improved.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.47-53
• /
• 2006

An Experiment was carried out to find the scheme far minimization of burr formation on inclined exit surface in drilling. Several drills with different geometry are used for drilling the workpiece with inclined exit surface. Step drills are specified with step angle and step size. The influence of the inclination angle of exit surface on burr formation was observed, which enables to analyze the burr formation mechanism on inclined exit surface. Along the edge on the inclined exit surface, burrs are formed by the bending deflection to feed direction and also burrs are formed in exit direction of cutting edge. To minimize the burr formed in feed direction, the corner angle which is formed by the inclination angle and step angle must be large enough not to be bent to burr. By decreasing step angle of drill and decreasing the distance between two axes of two holes, burr formation at the intersecting holes can be minimized. Burr formation mechanisms are analyzed according to the drill geometries and cutting conditions. Several schemes far burr minimization on inclined exit surface were proposed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.275-280
• /
• 2001

Recently, the trends of industrial products grow more miniaturization, variety and mass production. Micro drilling which take high precision in cutting work is requested more micro hole and high speed working. Especially, Micro deep hole drilling is becoming more important in a wide spectrum of precision production industries, ranging from the production of automotive fuel injection nozzle, watch and camera parts, medical needles, and thick multi-layered Printed Circuit Boards(PCB) that are demanded for very high density electric circuitry. This paper shows the tool monitoring results of micro drill with tool dynamometer. And additionally, microscope with built-in monitor inspection show the relationship between burr in workpiece and chip form of micro drill machining.

• Journal of Korean Neurosurgical Society
• /
• 제29권5호
• /
• pp.659-663
• /
• 2000

The motality rate of acute subdural hematoma(ASDH) associated with closed head injury is high in spite of recent advances in neurosurgery. Many variables in regard to outcome of ASDH have been assessed. But among them, intracranial pressure(ICP) control and the time interval between injury and operative evacuation are the only things that can be affected by doctor. We introduced a simple method to the management of ASDH for reducing the time interval between injury and operation. When the immediate decompressive operation of ASDH was impossible by any causes, we made a burr hole at the center of hematoma, usually on 2-3cm above temporal squama and 1-2cm behind coronal suture under local anesthesia before main operation. Partial hematoma evacuation was achieved through the burr hole and it was effective in preventing further worsening of patients neurological status before main operation. Prompt hematoma evacuation through the burr hole seemed to be effective in delaying secondary ischemic brain damage and made easy to closing the dura opening and replacement of the bone flap at the end of main decompressive operation. This easy method may reduce the time interval between injury and operation. We represent surgical technique with two cases of ASDH managed with this simple method.

• Journal of Korean Neurosurgical Society
• /
• 제43권1호
• /
• pp.11-15
• /
• 2008

Objective : Burr hole drainage has been widely used to treat chronic subdural hematoma (CSDH). However, the incidence of recurrent CSDH varies from 3.7 to 30% after surgery. The authors attempted to elucidate the risk factors associated with the recurrence of CSDH in one burr hole drainage technique. Methods : A total of 255 consecutive cases who underwent one burr hole drainage for CSDH were included in this study. Twenty-four patients (9.4%) underwent a repeated operation because of the recurrence of CSDH. We analyzed retrospectively the demographic, clinical and radiologic factors associated with the recurrence of CSDH. Results : In this study, two risk factors were found to be independently associated with the recurrence of CSDH. The incidence of CSDH recurrence in the high- and mixed-density groups was significantly higher than those in the low- and iso-density groups (p<0.001). Bleeding tendency such as in leukemia, liver disease and chronic renal failure was also significantly associated with recurrence of CSDH (p=0.037). Conclusion : These results suggest that high- and mixed- density shown on computed tomographic scan was closely relates with a high incidence of recurrence. Therefore, the operation could be delayed in those cases unless severe symptoms or signs are present. Reoperation using the previous burr hole site is a preferred modality to treat the recurrent CSDH.