• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.259-259
• /
• 2004

정밀부품의 가공 시에 발생되는 burr는 제품의 정밀도, 성능과 제품의 생산성에도 부정적인 영향을 끼치다. 따라서 효율적인 burr의 제거는 제품의 성능의 향상뿐만 아니라 생산성의 향상에도 긍정적인 영향을 미칠 수 있다. 자기 연마법(Magnetic Abrasive Finishing)은 연마제의 연마특성과 철의 자기화 성질을 이용한다. 자기장내의 자기력선의 응집현상을 통해서 burr를 제거하는 방법이다. 자기 유도자에 의해 형성된 magnet flow를 따라 지립이 정렬을 하고 정렬된 지립은 브러쉬의 역할을 하여 burr를 제거하게 된다.(중략)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1294-1298
• /
• 2005

In this study, combined micro press and surface finishing process are proposed to fabricate the micro nozzle array on a stainless steel sheet metal. In micro hole punching process the burr occurs inevitably, but the burr must be minimized in order to improve the quality and accuracy of the product. For this reason, subsequent magnetic field-assisted finishing technique is applied to remove the burr which exists around the nozzles for ink-jet printer head and proved to be a feasible for deburring by experiment. The deburring characteristics of sheet metals were investigated changing with polishing time and magnetic abrasive size. After the deburring, the burr size has remarkably reduced and roundness of the hole also has improved.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.7-13
• /
• 2005

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.241-244
• /
• 2002

Deburring is conducted using MAF(magnetic abrasive finishing) method. Magnetic inductor is designed and manufactured to generate proper magnetic induction far deburring the burr formed in drilling SM45C. Rotational speed, table feed rate, grain size of powder and working gap are changed to investigate the effect on deburring.

• 기술사
• /
• 제28권2호
• /
• pp.31-47
• /
• 1995

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1877-1880
• /
• 2003

We were interest in Deburring using MAF(magnetic abrasive finishing) method. So Magnetic inductor was designed and manufactured to generate proper magnetic induction fer deburring the burr formed in drilling SM45C. We experienced according to the Rotational speed, table feed rate, grain size of powder and working gap are changed to investigate the effect on deburring. At this time we experienced in abrasive effect mainly.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.30-47
• /
• 1997

This paper encompasses a general technology in robot deburring automation using solid rotaing burr tools. Deburring is a cumbersome area in finishing technology, where design concept and system implementation is based on knowhows and experiences rather then theoretical development. In the field engineering it is diffcult to find a clue to where and how to start the system design. This paper presents a guide inselection of tool concept of geometry and material. Also, the concept of tool compliance system is introduced, which is one of the most important factor in robot deburring. Typical problems encountered in the field are classified into 20 categories and the solutions are suggested by the proven technology from the expertise. Special problems in polymer and diecasting areas are also briefly mentioned.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.415-416
• /
• 2006

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.37-43
• /
• 2004

The performance of magnetic abrasive finishing fur surface is evaluated by the characteristic curve. The characteristic curve is generated by experiment in surface finishing. For experiment, new magnetic inductor is designed and manufactured. 15 kinds of powders are provided to find the relationship between powder characteristic and finishing performance. As powder, Fe-TiC. Polymer-TiC and Fe-NbC are used with different size. The size of abrasives and location are also important factor for the performance. From characteristic curve, two index are obtained, which specify the initial finishing performance and endurance of finishing performance. It is proved that the performance index can be applied to select proper powder for efficient deburring. It is shown that the characteristic curve can be used as good tools for evaluating powder performance in surface finishing and deburring.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.71-71
• /
• 2003