• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.174-180
• /
• 2017

Recently, the world faces the environmental problem such as air pollution due to harmful gas discharged from car and abnormal climate due to the green-house gases increased by the discharge of $CO_2$. Compressed Natural Gas (CNG), one of alternative for this problem, is less harmful, compared to the existing fossil fuel, as gaseous fuel, and less carbon in fuel ingredients and carbon dioxide generation rate relatively favorable more than the existing fuel. However, CNG fuel has the weakness of slow flame propagation speed and difficult fast burn. On the other hand, hydrogen does not include carbon in fuel ingredients, and does not discharge harmful gas such as CO and HC. Moreover, it has strength of quick burning velocity and ignition is possible with small ignition energy source and it's has wide Lean Flammability Limit. If using this hydrogen with CNG fuel, the characteristics of output and discharge gas is improved by the mixer's burning velocity improved, and, at the same time, is possible to have stable lean combustion with the reduction of $CO_2$ expected. Therefore, this research tries to identify the characteristics of engine and emission gas when mixing CNG fuel and hydrogen in each portion and burning them in spark igniting engine, and grasp the lean combustion limit and emission gas characteristics according and use it as the basic data of hydrogen-CNG premixed engine.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.357-364
• /
• 2016

Recently, the world faces the environmental problem such as air pollution due to harmful gas discharged from car and abnormal climate due to the green-house gases increased by the discharge of $CO_2$. Compressed Natural Gas (CNG), one of alternative for this problem, is less harmful, compared to the existing fossil fuel, as gaseous fuel, and less carbon in fuel ingredients and carbon dioxide generation rate relatively favorable more than the existing fuel. However, CNG fuel has the weakness of slow flame propagation speed and difficult fast burn. On the other hand, hydrogen does not include carbon in fuel ingredients, and does not discharge harmful gas such as CO and HC. Moreover, it has strength of quick burning velocity and ignition is possible with small ignition energy source and it's has wide Lean Flammability Limit. If using this hydrogen with CNG fuel, the characteristics of output and discharge gas is improved by the mixer's burning velocity improved, and, at the same time, is possible to have stable lean combustion with the reduction of $CO_2$ expected. Therefore, this research tries to identify the characteristics of engine and emission gas when mixing CNG fuel and hydrogen in each portion and burning them in spark igniting engine, and grasp the combustion stability and emission gas characteristics according and use it as the basic data of hydrogen-CNG premixed engine.

• 한국분무공학회지
• /
• 제10권2호
• /
• pp.1-9
• /
• 2005

An experimental study was carried out to obtain the fundamental data about the effects of radical ignition on premixture combustion. A CVC(constant volume combustor) divided into the sub-chamber and the main chamber was used. Numerous narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in tile sub-chamber derives the simultaneous multi-point ignition in the main chamber. We have examined the effects of the sub-chamber volume, the diameter and number of passage holes, and the equivalence $ratio({\Phi})$ on the combustion characteristics by means of burning pressure measurement and flame visualization. In a CVC, the overall burning time including the ignition delay became very short and the maximum burning pressure was slightly increased by the radical ignition(RI) method in comparison with those by the conventional spark ignition(SI) method. Combustible lean limit by RI method is extended by ${\Phi}=0.25$ compared with that by SI method. Also, In cases of charging the number and the diameter for the fixed total cross section of the passage holes, combustion period increased significantly at a sub-chamber with a single hole, but those of the other conditions had almost a similar tendency in the sub-chamber with 4 or more holes. regardless of equivalence ratio. Therefore, it was Proved that a critical cross section exists with the number of passage holes.

• 한국추진공학회지
• /
• 제26권5호
• /
• pp.35-43
• /
• 2022

본 연구에서는 고체추진제를 사용하는 closed bomb test(CBT)의 연소에 대한 정밀 모델링 및 해석을 수행하였다. 기상과 고상을 동시에 해석하기 위해 fluid structure interaction(FSI) 기법을 사용하였으며 기체상과 그레인의 연소해석은 Eulerian 방법을, 그레인의 이동은 Lagrangian 방법을 적용하였다. 고체상의 그레인과 연소가스의 상호 작용은 소스텀을 통해 완전 결합(fully coupled) 되도록 하였다. 그레인의 연소거리와 연소면의 이동을 모사하기 위하여 volume of fluid(VOF) 방법을 사용하였고, 그레인에 작용하는 힘은 그레인 연소면에 작용하는 압력과 중력을 고려하고, VOF의 속도항에 그레인 연소속도와 그레인 이동속도를 고려하였다. 개발한 수치모델을 바탕으로 1개와 3개 그레인에 대한 연소해석을 수행하여 실험결과와 비교 검증하였다. 연소시에 나타나는 압력 섭동에 대한 음향장을 분석하였다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제13권2호
• /
• pp.75-85
• /
• 2007

현재 시장에는 PVR, DVR, 캠코더 등과 같이 기록 가능 cd, dvd와 같은 광매체에 멀티미디어 스트림을 저장하고, 재생하는 많은 임베디드 시스템들이 많이 있다. 이 논문에서는 다양한 응용과 임베디드 시스템에서 사용할 수 있도록 명확한 구조와 문서를 가진 운영체제 독립적 광매체 API의 설계하고 공개 소스 형태로 구현한 내용을 기술한다. 연구에서는 실시간 광매체 기록을 위하여 ISO-9660 표준을 따르는 새로운 매체 레이아웃과 API를 제안하고 구현하였다. 또 개발된 API의 유용성을 검증하기 위해, 잘 알려진 CD 버닝 프로그램인 cdrecord를 대치할 수 있는 텍스트 응용 프로그램과 그래픽 응용 프로그램도 개발하였다. 모든 초기 개발은 Linux PC 환경에서 진행되었으며, 이후 pSOS를 운영체제로 하는 상용 임베디드 시스템에도 이식되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.293-300
• /
• 2008

Efficient designing of SRM Grains in the field of Rocketry is still the main test for most of the nations of world for scientific studies, commercial and military applications. There is a strong need to enhance thrust, improve the effectiveness of SRM and reduce mass of motor and burning time so as to allow the general design to increase the weight of payload/on board electronics. Moreover burning time can be increased while keeping the weight of the propellant and thrust in desired range, so as to give the time to control / general design group in active phase for incorporating delayed cut off if required. A mathematical design, optimization & analysis technique for Slotted Tube Grain has been discussed in this paper. In order to avoid the uncertainties that whether the Slotted Tube grain configuration being designed is best suited for achieving the set design goals and optimal of all the available designs or not, an efficient technique for designing SRM Grain and then getting optimal solution is must. The research work proposed herein addresses and emphasizes a design methodology to design and optimize Slotted Tube Grain considering particular test cases for which the design objectives and constraints have been given. In depth study of the optimized solution have been conducted thereby affects of all the independent parametric design variables on optimal solution & design objectives have been examined and analyzed in detail. In doing so, the design objectives and constraints have been set, geometric parameters of slotted tube grain have been identified, performance prediction parameters have been calculated, thereafter preliminary designs completed and finally optimal design reached. A Software has been developed in MATLAB for designing and optimization of Slotted Tube grains.

• 공업화학
• /
• 제30권1호
• /
• pp.95-101
• /
• 2019

한국의 2016년 화장률은 82.7%로 1994년의 20.5%보다 4배나 높았다. 화장률이 점차 증가함에 따라 화장시설이 부족해지면서 화장률이 높아질수록 화장시설의 증설이 요구되고 있으며, 또한 화장로의 장기간 작동에 따라 많은 양의 연료가 사용되고 있다. 이러한 문제를 해결하기 위해 본 연구에서는 화장로의 열효율 특성을 최적화하고, 증가하는 화장에 대한 요구에 대응하는 화장 시스템을 제안한다. 본 논문의 목적은 전산 유체 역학(computational fluid dynamics, CFD)을 사용하여 시뮬레이션을 수행함으로써 열전달 계수를 포함한 열흐름 특성을 조사하는 것이다. CFD 모델은 화장시설에 대한 현장 실험으로 검증되었다. 시뮬레이션 결과, 주 연소기에서 연료 소비가 거의 25% 감소하고 체류 시간이 증가했다. 시뮬레이션을 토대로 개량된 연소기, 열교환기, 2차 연소 공기 시스템, 내화 및 단열재를 사용하여 개선된 화장로를 구성하였다. 현장실험 결과 에너지 소비가 약 54.4%로 줄어들었으며 연소 시간이 거의 20 min 단축되었다.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.45-53
• /
• 2004

An experimental study was carried out to obtain the fundamental data about the effects of radicals induced injection on premixture combustion. A constant volume combustor divided to the sub-chamber and the main chamber was used. The volume of the sub-chamber is set up to occupy less than 1.5％ of that of whole combustion chamber. Radial twelve narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in the sub-chamber will derive the simultaneous multi-point ignition in the main chamber. While the equivalence ratio of pre-mixture in the main chamber and the sub-chamber is uniform. We have examined the effects of the sub-chamber volume, the diameter of passage hole, and the equivalence ratio on the combustion characteristics by means of burning pressure measurement and flame visualization. In the case of radical ignition method(RI), the overall turning time including the ignition delay became very short and the maximum burning pressure was slightly increased in comparison with those of the conventional spark ignition method(SI), that is, single chamber combustion without the sub-chamber. The combustible lean limit by RI method is extended to more ER=0.25 than that by SI method. Therefore the decrease of every emission including NOx and the improvement of fuel consumption is anticipated due to lean burn.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.591-598
• /
• 2018

The reaction characteristics of aluminum-copper(II) oxide composites initiated by the electrostatic discharge were studied as changing the aluminum particle size. Three different sizes of aluminum particles with nano-size copper(II)-oxide particle were used in the study. These composites were manufactured by two methods i.e. a shock-gel method and a self-assembly method. The larger aluminum particle size was, the less sensitive and less violent these composites were based on the electrostatic test. On the analysis of high speed camera about ignition appearances and burning time, the burning speed was faster when aluminum particle size was smaller.

• 한국석유지질학회:학술대회논문집
• /
• 한국석유지질학회 1999년도 제6차 학술발표회 발표논문집
• /
• pp.68-84
• /
• 1999

자연 미생물 분해 (Biodegradation)는 미생물들이 유출 기름 또는 기타 환경 오염물들을 분해시키는 자연 풍화 과정이며 이를 더욱 가속화시키기 위하여 인공적으로 미생물에 필요한 영양분 공급 또는 미생물들을 추가로 파종하는 것을 미생물 분해법 (Bioremediation)이라고 한다 현재 해상 기름 유출 사고 시 기계적 장비를 이용한 제거방법이 널리 사용되고 있으며 기계적 제거 방법의 대안으로서 화학분산제 (Chemical Dispersants) 사용과 현장 소각 (In-situ Burning) 방법이 있다. 또 하나의 대안으로서 이 미생물 분해법이 지적되고 있으며 충분한 시간이 주어질 때 해안으로 유입되는 기름에 대하여 일부 미생물들을 이용하여 유출 기름을 적어도 부분적으로 제거할 수 있다. 본 논문에서는 해상 유출 기름 제거를 위한 미생물 분해법의 종류와 기술의 잠재력 그리고 적용 시 고려하여야 할 문제점들을 분석하여 발생 가능한 피해를 최소화시키는데 필요한 정보들을 정리하였다.