• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.219-229
• /
• 2018

We isolated Streptomyces scopuliridis KR-001 that produced herbicidal active metabolite(s) against several grass and broad leaf weeds. In this study, potential as natural herbicide of mutant N-29 broth filtrate of S. scopuliridis KR-001 was investigated to Ambrosia artemisiifilia in a greenhouse and field condition. The broth filtrate of mutant N-29 by foliar application showed a strong herbicidal activity to A. artemisiifilia with leaf stage in a greenhouse condition. Also, field trial of foliar application within treatment range had effectively controlled with early and middle stage of A. artemisiifilia at the natural habitats. Phytotoxic symptoms of mutant N-29 broth filtrate by foliar application were wilting and discoloration, and burn-down of leaves and finally plant death. These results suggest that mutant N-29 broth filtrate is considered possible as a natural herbicide for controlling environmentally friend to invasive alien plant such as A. artemisiifilia and may provide a new lead molecule for a more efficient herbicide.

• Composites Research
• /
• v.31 no.4
• /
• pp.139-144
• /
• 2018

Long Fiber-reinforced composites have advantages of excellent production efficiency and formability of complex shapes compared to conventional continuous fiber reinforced composite materials. However, if we need to make complicated composite shapes or to assemble parts made of different materials, a variety of joining methods are needed. In general, long fiber prepreg sheet (LFPS) contains mold release agent to facilitate demolding after thermoforming. Therefore, mechanical fastening is required in addition to the adhesive bonding to get proper joining strength. In this study, we proposed a stainless steel insert for co-cure bonding which cures LFPS and bonds the stainless steel insert through thermoforming process. The wing of the insert which is spread during the thermoforming process induces adhesion and mechanical wedging effect and serves as a hook to resist the pulling force. The burn-out method was used to confirm the unfolded state of the stainless steel insert wings inserted into the composite material. The static pull-out test was performed to quantitatively evaluate the joining strength. From these experimental results, the condition which guarantees the most appropriate joining strength was derived.

• Weed & Turfgrass Science
• /
• v.6 no.3
• /
• pp.212-221
• /
• 2017

An actinomycetes isolate G-0299 obtained from a forest soil showed strong phytotoxic activity to Digitaria ciliaris. For the foliar application study, the culture filtrate of the isolate G-0299 showed strong herbicidal activity only to D. ciliaris among the 12 monocot and 5 dicot weed species. And herbicidal activity at a concentration of 500, 250, 125 and $62.5{\mu}gmL^{-1}$ of culture filtrate was 100%, 98%, 70% and 40%, respectively. Phytotoxic symptoms of the culture filtrate by foliar application were desiccation and burn-down or bleaching of leaves and finally plant death. And then the herbicidal activity was exhibited only under the light condition. Also, chlorophyll loss of D. ciliaris leaf tissues in the light condition was much higher than in the dark condition and then chlorophyll content decreased 82%, 5%, respectively. In conclusion, our results suggest that soil bacteria, isolate G-0299 could be a good candidate for new bio-herbicide and provide a new lead molecule for a more unique herbicide.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3246-3252
• /
• 2009

The interest on the recovery of thermal energy using the waste has been rising to solve the problems of continuous increase of waste generation and the depletion of the fossil fuel recently. The incineration has been used most popularly as a treatment process of the waste for the energy recovery. However, it is expected that incineration and design cost will increase in the treatment of air contaminant emitted from incinerator. This research has simulated the actual incinerator and the flue gas treatment system using the Aspen plus which is the software to simulate the chemical process. The incineration process is composed of the 1st and 2nd combustor to burn the waste, SNCR process to reduce the $NO_x$ using the urea, and the steam generation process to save the energy during incineration. The $Ca(OH)_2$ slurry was used as an acid gas (HCl, $SO_2$) treatment materials and the removal efficiency for the products from the neutralization of acid gas in SDA and combustion ash was simulated at the bag filter. The simulation result has been corresponded with the treatment efficiency of emitted gas from the actual industrial waste incinerator and it is presumed to be used to forecast the efficiencies of flue gas treatment system in the future.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.383-389
• /
• 2004

A commercially pure Ti(CP-Ti) and Ti-25wt％Pd alloy for dental applications were cast into a phosphate-bonded Al$_2$ $O_3$/ $SiO_2$ investment mold and the surface of the casting specimens were investigated by means of SEM/EDS, XRD and XPS. The addition of 25wt％Pd in CP-Ti showed a moderate mold reaction owing to the considerable lowering of melting point. XRD analysis of the investment after burn-out treatment revealed that it consisted essentially of $SiO_2$, Al$_2$ $O_3$, P$_2$O$\_$5/, Mg$_3$(P $O_4$)$_2$, AlP $O_4$, Mg$_2$ $SiO_4$, MgAl$_2$ $O_4$ The mold reaction products were Ti$\_$5/Si$_3$ and Ti $O_2$ in case of CP-Ti casting and Ti $O_2$ and SiO$\_$x/ in case of Ti-25wt％ Pd casting.

• Journal of Chest Surgery
• /
• v.40 no.2 s.271
• /
• pp.97-102
• /
• 2007

Background: Endovenous laser treatment has recently been introduced as a less invasive technique, with many good results reported, A 980-nm diode laser was used on the great saphenous vein (GSV) occlusions in patients with varicose veins, due to GSV reflux, and the therapeutic effects analyzed. Material and Method: Between September 2003 and February 2006, 238 patients (332 cases) with GSV reflux underwent endovenous laser treatment with a 980-nm diode laser. Operative procedures were simultaneous endovenous laser treatment and ambulatory phlebectomy. The preoperative clinical findings, postoperative complications and postoperative duplex US follow up results at 1 and 3 months were reviewed. Result: Postoperative complications were ecchymosis in almost cases, paresthesia 68 cases (20.5%) and skin burn in 3 cases (0.9%). Follow up duplex US revealed 26 and 10 cases at 1 and 3 months of GSV reflux or partial recanalization, with therapeutic success rates of 91.3 and 87.9%, respectively. Conclusion: The treatment of GSV occlusion with an endovenous laser is less invasive than traditional GSV stripping, but relatively high recanalization was experienced, possibly due to inadequate laser power, laser fiber pullback speed or an extremely dilated GSV. However, continuous attempts will be required to reduce the recanalization after the procedure, with accurate follow up using duplex US.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.475-481
• /
• 2019

A splint is one of assisting devices for the disabled with hemiplegia or contracture and is manually made by an experienced expert. Heated thermoplastic materials are continuously fitted to the affected part. This traditional method has a possible risk of low-temperature burn, quality variance of the splint due to the proficiency of maker. etc. While various approaches has been made using 3D printing technology in order to redeem those disadvantages, they still carry high cost issues with 3D scanners or accuracy issues with manual measurement. This research begins with symmetrical characteristics of human body and focuses on the preliminary study for the possibility of splint manufacturing with 3D printing technology based on geometric characteristics of unaffected arm. 3D right and left forearm models of healthy male adults were created by photogrammetry software and a series of digital images in order to measure the circumference and cross-sectional area of the forearm models at every 20mm from the elbow. The circumference and cross-sectional area showed tolerable levels of differences between both sides within subjects; The circumference and cross-sectional area showed very strong correlations between both sides within subjects. From these findings, the possibility of splint manufacturing with 3D printing technology could be confirmed based on the geometric characteristics of unaffected side.

• (The)Study of the Eastern Classic
• /
• no.59
• /
• pp.387-404
• /
• 2015

A great number of philosophers during 'Six's Dynasty'(六朝) had the most active and furthest discussion throughout the history of China to study the concerns; Having a question such as "Where the body and the soul come out around us?", "What is the essence of complicated and delicate mental operation?" "Are there any relationships between the body and the soul?" and then "How do the human soul exist after death?" First, during 'Don-Jin' period as body and soul theory was based on 'Yin'(陰) and 'Yang'(陽). 'He Cheng Tian' said that everything which was burn on earth should die because the soul couldn't stay the dead body longer. In the same age, 'Ming Fo Run' and 'Da Xing Run' which denied that the soul couldn't exist forever were main topics of the discuss among the distinguished philosophers. Next, during 'Northern & Southern dynasty', body and soul theory was divided into two. First of all, body and soul of 'Heng Cun' might be harmonized, however, that was not perfectly put together. Because, after human death, even if the body of human might be existed, the soul left elsewhere but always stayed around us. The body was the soul which meant that the soul was to the nature of the body and the body was to the usage of soul. Many philosophers insisted that nobody meant no soul according to 'Shen Bu Mie Run' and 'Shen Mie Run'which was the main topic as an academic argument in those days. Finally, during Dong-Jin dynasty covered the significance of Body and Soul theory and analyzed the influence into the history of the history philosophy in china.

• Journal of the Korean Institute of Gas
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2022

This paper is a purpose to study and analyze the engine starting failure examples for LPG car. The first example, the researcher verified the phenomenon that didn't supply the fuel because of filter clogging by fine alien substance in the gas valve line when he inspected the emergency cutting valve. The second example, there was no the influence of gas leakage when the solenoid operated at first. But the damage part of solenoid assemblying face wad downed a durability according to running a valve. Eventually, the researcher checked on the phenomenon of engine stopping by no gas feeding in solenoid because of leaking of gas. The third example, the researcher sought that the wiring sheaths of connector fin between EGR 10A fuse and LPG switch verified the burn-out phenomenon due to the bad contacting as tension damage produced the overheating. Therefore, the manager of a car has to do pre-inspection no producing electric failure and he must maintain his car with optimum condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.2
• /
• pp.121-127
• /
• 1977

Leaf burning due to nitrofenapplication was characterized as brown color spot appearing on the leaf sheath and blade. The spots predominantly appeared around 5-7 cm high above soil surface regardless of different particle size, formulation, application method, or water level. Magnitude and frequency of burn spots increased somewhat as the granular size gets finer, by higher water level, or in transplanted rice compared to directly sown rice when applied at 7 leaf-stage, but there was no indication of increase in leaf burning due to clinging of floating dust to rice plant. When collections from local distributor's stock of TOK 7G, a granular formulation of nitrofen, were analyzed for particle size composition, 98.9% by weight ranged between 9 to 35 meshes, and only about 0.08% by weight was of particles finer than 100 mesh.