• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.84-97
• /
• 2016

This study was to investigate the user's thermal environments of the children's parks according to pavements and sunscreen types during periods of heat waves. The measurements were conducted at the sand pits, rubber chip pavement, shelters, and green shade ground of the two children's parks located in Jinju, Korea(Chilam: $N\;35^{\circ}11^{\prime}1.4{^{\prime}^{\prim}}$, $E\;128^{\circ}5^{\prime}31.7{^{\prime}^{\prime}}$, elevation 38m, Gaho: $N\;35^{\circ}09^{\prime}56.8{^{\prime}^{\prime}}$, $E\;128^{\circ}6^{\prime}41.1{^{\prime}^{\prime}}$, elevation 24m) over three days during 11-13, August, 2016. The highest ambient air temperatures at the Jinju Meteorological Office during the three measurement days were $35.9{\sim}36.8^{\circ}C$, which corresponded with the extremely hot weather. A series of experiments measured air temperature, relative humidity, wind velocity, black globe temperature, and long-wave and short-wave radiation of the six directions 0.6 m above ground level. The wet bulb globe temperature(WBGT) and the universal thermal climatic index(UTCI) were used to evaluate thermal stress. Surface temperature images of the play equipment were also taken using infrared thermography. Surface temperatures of the play equipment and grounds were used to evaluate burn risk through contact with playground materials. The results showed the following. The maximum air temperatures averaged over 1-hour period for three days were $36.6{\sim}39.4^{\circ}C$. The sun shades reduced those temperatures by up to $2.8^{\circ}C$(green shade) and $1.0^{\circ}C/2.3^{\circ}C$(shelters). The minimum relative humidity values averaged over 1-hour period for three days were 44~50%. The sun shades increased those humidity values by up to 6%(green shade) and 4%/6%(shelters). The risk of heat related illness at the measurement sites of the children's parks were extreme and high in the daytime hours. The maximum WBGT values averaged over a 30-minute period for three days were $31.2{\sim}33.6^{\circ}C$. The sun shades reduced those WBGT values by up to $2.4^{\circ}C$(green shade) and $0.5^{\circ}C/2.1^{\circ}C$(shelters) compared to sandpits, but would not block the risk of heat related illness in the daytime hours. The category of heat stress at the measurement sites of the children's parks were extreme and very strong in the daytime hours. The maximum UTCI values averaged over a 30-minute period for three days were $39.9{\sim}48.1^{\circ}C$. The sun shades reduced those UTCI values by up to $7.8^{\circ}C$(green shade) and $4.1^{\circ}C/8.2^{\circ}C$(shelters) compared to sandpits, but could not lower heat stress category from extreme and very strong to strong and moderate in the daytime hours. According to the burn threshold criteria when skin was in contact with playground materials, the maximum surface temperature of the stainless steels($70.8^{\circ}C$) surpassed three seconds $60^{\circ}C$ threshold for uncoated steel, that of the rubber chip($76.5^{\circ}C$) surpassed five seconds $74^{\circ}C$ threshold for the plastic, that of the plastic slide($68.5^{\circ}C$) and seats($71.0^{\circ}C$) surpassed the one min $60^{\circ}C$ threshold for plastic, respectively. The surface temperatures of shaded play equipment were lower approximately $20^{\circ}C$ than those of play equipment exposed to the sun. Therefore, sun shades can block the risk of burns in daytime hours. Because of the extreme and high risk of heat related illness and extreme and high heat stress at the children's parks during periods of heat waves, parents and administrators must protect children from the use of playgrounds. The risk of burn when contact with play equipments and grounds at the children's parks during periods of heat waves, was very high. The sun shades are essential to block the risk of burn from play equipments and grounds at the children's parks during heat waves.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.451-457
• /
• 2019

In this study, the characteristics of coffee grounds were reviewed by making them from solid fuel through heat-drying and oil-drying method. The differences in the higher calorific power by each dried sample were compared. And industrial analysis using the thermogravimetric analyzer was considered for applicability to organic waste and oily samples. Before and after drying, the surface of the specimen was observed with SEM equipment and the ingredients were measured through the EDS equipment. As a result, no other hazardous substances, such as heavy metals, were measured. Next, The differences between thermal decomposition and combustion reactions were considered through the TG and DTG curves. As a result, it is that the oil-dried coffee grounds is longer to burn than the heat-dried coffee grounds. Finally, the combustion gases emitted through the thermogravimetric analyzer were collected and the carbon monoxide and carbon dioxide performed qualitative and quantitative analysis using GC over time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.1
• /
• pp.81-98
• /
• 2013

Since Probabilistic Latent Semantic Analysis (PLSA) and Latent Dirichlet Allocation (LDA) were introduced, many revised or extended topic models have appeared. Due to the intractable likelihood of these models, training any topic model requires to use some approximation algorithm such as variational approximation, Laplace approximation, or Markov chain Monte Carlo (MCMC). Although these approximation algorithms perform well, training a topic model is still computationally expensive given the large amount of data it requires. In this paper, we propose a new method, called non-simultaneous sampling deactivation, for efficient approximation of parameters in a topic model. While each random variable is normally sampled or obtained by a single predefined burn-in period in the traditional approximation algorithms, our new method is based on the observation that the random variable nodes in one topic model have all different periods of convergence. During the iterative approximation process, the proposed method allows each random variable node to be terminated or deactivated when it is converged. Therefore, compared to the traditional approximation ways in which usually every node is deactivated concurrently, the proposed method achieves the inference efficiency in terms of time and memory. We do not propose a new approximation algorithm, but a new process applicable to the existing approximation algorithms. Through experiments, we show the time and memory efficiency of the method, and discuss about the tradeoff between the efficiency of the approximation process and the parameter consistency.

• Archives of Reconstructive Microsurgery
• /
• v.21 no.2
• /
• pp.131-136
• /
• 2012

Purpose: Arterialized venous flap is useful for reconstruction of the traumatic soft tissue defect in fingers, but insufficient circulation of the traumatic fingers makes surgeons annoying to use the flap. We have grafted flaps in 7 fingers with insufficient vascular bed hoping to expanded the category of the flap. Materials and Methods: Arterialized venous flap have transplanted in 7 fingers from March 2008 through February 2010 and followed up for 4 to 16 months(average 7.2 months). They were all male with a mean age at the time of surgery was 33. The main injury was crushing in 4 degloving, contact burn and saw injury was I respectively. Time interval from injury to flap transplantation was average 3.1. weeks(3 days to 6 weeks). Designed flap size ranges from $8cm{\times}3.5cm$to $4cm{\times}3cm$. Vessel type of flap was one artery with two veins were 5 cases and one artey with one vein 2. Flap type was cutaneous in 3, tendocutaneous 2, neurotendocutaneous 1 and neurocutaneous 1. The circulation state of recipient site was avascular in 2 cases, insufficiency 3 and tip avascular 2. Results: Arterialized venous flap was complete survived in 2 cases, partial necrosis(less than 10%) 3 and failed in 2. Conclusion: An arterialized venous free flap could be a useful procedure for reconstruction in soft tissue or combined defect of the finger despite an avascular or insufficient vascular beds if the recipient beds were free from infection.

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.115-123
• /
• 2012

Human placenta extract (hPE) has therapeutic potential against certain diseases such as burn injury, liver cirrhosis and chronic wound through stimulating tissue repair processes. However, the effects of hPE on liver regeneration in animals are unknown. This study investigated the effect of hPE on the expression of proliferating cell nuclear antigen (PCNA) during liver regeneration induced by partial hepatectomy (PH) in rats. The activities of AST, ALT and ALP increased during a few days after PH. A high level of ALP was particularly seen at day 3 in the control group. All the levels of experimental groups were normalized by day 5 after PH. On immunohistochemistry, the expression of PCNA increased at the early days, showed a peak at day 3 after PH. The PCNA staining was more obvious in the experimental group over the whole period. By western blotting, PCNA seemed to be more strongly expressed in the hPE injected group in the early stage and fell to almost undetectable levels at day 7. On immunocytochemical observations, the number of PCNA-gold particles in the nuclei at day 1 of the hPE treated groups was more than those of the untreated groups. The results suggest that hPE could accelerate liver regeneration induced by PH involving the expression of PCNA in rats.

• Journal of Acupuncture Research
• /
• v.28 no.2
• /
• pp.1-11
• /
• 2011

Objectives : The aim is to comprehend the difference of moxibustion used according to applied body parts (knee pain, neck pain, back pain) to oriental doctors running clinic in Seoul. Methods : A sampling of 288 oriental doctors running clinic in Seoul was done and the doctors were asked to fill out 20 questions by interviewing directly from Nov. 23. 2009 to Jan. 9. 2010. Results : The result shows that moxibustion was used for knee pain and back pain more than neck pain. The type of moxibustion mostly used was sticker moxibustion for all three symptoms. Burn marks were left mostly in knee and back pain. Most large volume of moxa was used to back pain. More than half of the oriental doctors used 1-3 acupoints for one procedure and on average 2-3 sessions was done. Patients with knee pain and back pain had more than 4 sessions compared to neck pain. Treatments were mostly done 3 times a week, and as for total treatment period, it took less than 1 week for acute symptom, and it took more than 1 week and less than 5 weeks for chronic symptom. Conclusions : This research shows that the method of moxibustion used differs according to the area of treatment(knee pain, neck pain, back pain) by survey of oriental doctors through direct interviews.

• Korean Journal of Acupuncture
• /
• v.28 no.3
• /
• pp.53-62
• /
• 2011

Objectives : Burn is most common adverse events of moxibustion. Various kinds of components influence on the heat stimulation of commercial indirect moxa, but there are not enough investigation about the status. The purpose of this study is to investigate the 6 components to build a base data that is currently available to build a standard of an indirect moxibustion. Methods : The length and weight, density, thickness of the paper disk, diameter of the paper disk, and diameter in the paper disk hole were measured against 6 kinds of commercial indirect cautery. Results : 1. 'Seoam', 'Kihwang' and 'Taegeuk' shows uniform length than the other brands. 2. 'Dongbang', 'Kihwang' and 'Taegeuk' shows uniform weight than the other brands. 3. 'Dongbang', 'Kihwang' and 'Taegeuk' shows uniform density than the other brands. 4. 'Dongbang' and 'Kihwang' shows uniform thickness than the other brands. 5. 'Seoam', 'Dongbang' and 'Taegeuk' shows uniform diameter of disc hole than the other brands. Conclusions : As a result of investigation, 'Dongbang' and 'Kiwhang' indirect moxibustion was identified as a uniform product. This results are considered as an important base materials of the KS through commercial indirect moxibustion.

• Archives of Plastic Surgery
• /
• v.39 no.2
• /
• pp.138-142
• /
• 2012

Background : Electrical burns are one of the most devastating types of injuries, and can be characterized by the conduction of electric current through the deeper soft tissue such as vessels, nerves, muscles, and bones. For that reason, the extent of an electric burn is very frequently underestimated on initial impression. Methods : From July 1999 to June 2006, we performed 15 cases of toe tissue transfer for the reconstruction of finger defects caused by electrical burns. We performed preoperative range of motion exercise, early excision, and coverage of the digital defect with toe tissue transfer. Results : We obtained satisfactory results in both functional and aesthetic aspects in all 15 cases without specific complications. Static two-point discrimination results in the transferred toe cases ranged from 8 to 11 mm, with an average of 9.5 mm. The mean range of motion of the transferred toe was $20^{\circ}$ to $36^{\circ}$ in the distal interphalangeal joint, $16^{\circ}$ to $45^{\circ}$ in the proximal interphalangeal joint, and $15^{\circ}$ to $35^{\circ}$ in the metacarpophalangeal joint. All of the patients were relatively satisfied with the function and appearance of their new digits. Conclusions : The strategic management of electrical injury to the hands can be both challenging and complex. Because the optimal surgical method is free tissue transfer, maintenance of vascular integrity among various physiological changes works as a determining factor for the postoperative outcome following the reconstruction.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.171-182
• /
• 2016

Since FAO introduced the Globally Important Agricultural Heritage Systems(GIAHS) in 2002, 36 sites of 15 countries so far have been listed on GIAHS. This study aims to find the important agricultural heritages of Korea and to prepare the methods for them to be selected as GIAHS. We have analyzed the proposals of the 36 GIAHS listed in order to study the characteristics of their components of the agricultural heritage which worked for being selected. To analyze the components of the agricultural heritage first, agricultural heritage was classified into 13 types and 42 components in light of GIAHS criteria. Then central themes were set to analyze the relevant contents in the proposals. They were, the type of GIAHS Site, significant agricultural landscape, the agriculture-forestry-fisheries-livestock linkage systems, the multi-layered, inter-cropping, circulation cultivation systems, the soil and water management systems, the conservation of agrobiological diversity and genetic resources, the history of the agricultural heritage, the succession of traditional farming techniques, the cultural diversity and so on. Most GIAHS are located in mountains, grasslands, rivers and coasts, desert than in plains, through which GIAHS assure us that it is the heritage of human challenge to overcome the harsh geographic environment and maintain a livelihood. In these sites the traditional farming techniques are carried on, such as mountain clearings, terraced rice paddies, and burn fields, and the unique irrigation systems and agricultural landscapes are well maintained, and the eco-friendly traditional farming techniques utilizing abundant forest resources and agriculture are well handed down. The origin or home of crop growing, a variety of genetic crop storage, the world's largest crop producer and preserving cultural diversity are also important factors for the selection.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.291-295
• /
• 2007

FTL(Fuel Test Loop) is a facility that confirms performance of nuclear fuel at a similar irradiation condition with that of nuclear power plant. FTL consists of In-Pile Test Section (IPS) and Out-Pile System (OPS). FTL construction work began on August, 2006 and ended on March, 2007. During Construction, ensuring the worker's safety was the top priority and installation of the FTL without hampering the integrity of the HANARO was the next one. Task Force Team was organized to do a construction systematically and the communication between members of the task force team was done through the CoP(community of Practice) notice board provided by the Institute. The installation works were done successfully overcoming the difficulties such as on the limited space, on the radiation hazard inside the reactor pool, and finally on the shortening of the shut down period of the HANARO. Without a sweet of the workers of the participating company of HEC(Hyundae Engineering Co, Ltd), HDEC(HyunDai Engineering & Construction Co. Ltd), equipment manufacturer, and the task force team, it is not possible to install the FTL facility within the planned shutdown period. The Commissioning of the FTL is on due to check the function and the performance of the equipment and the overall system as well. The FTL shall start operation with high burn up test fuels in early 2008 if the commissioning and licensing progress on schedule.