• Title/Summary/Keyword: Burn Duration

검색결과 58건 처리시간 0.019초

낮은 엔진 부하의 운전조건에서 흡기포트 내 물 분사에 따른 가솔린 직접분사 엔진의 연소 특성 (Combustion Characteristics of Gasoline Direct Injection Engine with Water Injection into Intake Port under Low Engine-Load Operating Condition)

  • 전해강;이경환;최명식;박수한
    • 한국분무공학회지
    • /
    • 제23권2호
    • /
    • pp.96-101
    • /
    • 2018
  • The purpose of this study is to investigate the effect of water injection on combustion characteristics of gasoline direct injection (GDI) engine with turbo-charger under low-load operating condition. The test engine used in this study has four-cylinder and 10.2 of compression ratio. In order to study the effect of water injection ratio on combustion characteristics, the water was injected into the intake port from 10% to 50%, based on fuel injection quantity. From the experiment, it revealed that the water injection induced the improvement of fuel economy because of the advance of spark-timing by the reduction of in-cylinder temperature. In addition, the water injection caused the prolong of extension of the ignition delay and slight increase of burn duration.

정적연소기에서의 메탄-공기 혼합기의 연소특성(2) : 비균질급기 (Combustion Characteristics of Methane-Air Mixture in a Constant Volume Combustion Chamber(2) : Inhomogeneous Charge)

  • 최승환;전충환;장영준
    • 한국자동차공학회논문집
    • /
    • 제11권4호
    • /
    • pp.29-36
    • /
    • 2003
  • A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at spark plug and the combustion characteristics of inhomogeneous charge methane-air mixture under several parameters. The flow characteristics such as mean velocity and turbulence intensity was analyzed by hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer was used to investigate the effect of initial charge pressure, excess air ratio and ignition times on combustion pressure and combustion duration. Mean velocity and turbulence intensity had the maximum value at 200 or 300ms and then decreased to beneath 0.05m/s gradually at 3 seconds. Second mixture is accompanied by an increase in the combustion rate, and that the higher the mass which is added in the second stage injection, the faster the burn rate.

가솔린 기관의 혼합기 형성 촉진이 연소 특성에 미치는 영향 (Effect of Enhanced Mixture Formation on the Combustion Characteristics in Gasoline Engine)

  • 이창식;서영호;김민수
    • 한국자동차공학회논문집
    • /
    • 제3권5호
    • /
    • pp.56-63
    • /
    • 1995
  • In this paper, the fuel atomization effect of a spark-ignition engine on the lean burn characteristics is studied. The fuel atomization is enhanced by heating the inside of the intake manifold with electric heater. Several operating parameters including cyclic variation are expressed against the air-fuel ratio from the experimental results. The fuel atomization gives much influence on the combustion stability. As the intake manifold is heated, the combustion duration decreased and the value of COV in the lean region as well as in the theoretical equivalence ratio became smaller than of not-heated.

  • PDF

고주파점화장치를 사용한 착화성 향상에 관한 연구 (A Study on an Improvement of the Ignitability Using the High Frequency Ignition System)

  • 이중순;강병무;하종률
    • 대한기계학회논문집B
    • /
    • 제20권1호
    • /
    • pp.359-368
    • /
    • 1996
  • For fuel economy and pollutant reduction, the interests in lean burn has increased recently. The purpose of this research is to develop a High Frequency Ignition System (HIS) that can make powerful ignition. We studied relations between performance of HIS and probability of inflammation under various ignition conditions. It is concluded that the portion of capacitance energy to the total energy is comparatively larger and that the optimum spark interval and spark duration are dependent upon conditions of Constant Volume Combustion Chamber.

Evaluation of combat calorie consumption based on GoBe2 nanosensor

  • Shuo Guan;Benxu Zou
    • Advances in nano research
    • /
    • 제14권6호
    • /
    • pp.527-539
    • /
    • 2023
  • Measuring energy burn during intensive combat sport has been a challenging concerns for a long time. In the present article, the energy consumption during combat sports is measured by use of wearable GoBe2 equipped with nanotechnology measuring devices. In this regard, 12 professional combat athletes were asked to wear GoBe2 devices during different sessions of intensive combat exercises. The curves provided by GoBe2 nano-sensor devices are further collected and analyzed for different combat durations. On the other hand, energy consumption in these athlete is calculated using other validated methods to evaluate reliability of GoBe2 wearable devices. Based on the results obtained from these experiments a multi-parameter mathematical model is presented for estimation of combat calorie consumptions. The results show that nanotechnology in these type of sensors could help in estimation of calorie consumption during combat. Moreover, the reliability of using wearable GoBe2 sensors are satisfactory except for some specific conditions. The mathematical model provides a satisfactory results based on athlete physical condition and also duration of the combat with about 8% error margin in the results.

토치 점화 장치의 체적에 따른 연소특성 파악 (Combustion Characteristics of Volume Variation of Torch in a CVCC)

  • 권순태;김형식;최창연;박찬준;엄인용
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 2010년도 춘계학술 발표회
    • /
    • pp.166-170
    • /
    • 2010
  • 토치 점화 장치의 연소 특성을 파악하기 위하여 6개의 각기 다른 토치 점화 장치를 설계하였다. 토치 점화장치의 체적이 메탄의 연소특성에 미치는 영향을 파악하기 위하여, 토치점화 장치의 높이(h)와 오리피스 직경(De)는 10mm와 6mm로 고정하고, 입구 직경(D)을 12mm에서 22mm까지 2mm씩 증가시키며 토치 점화 장치를 설계하였다. 초기 화염 생성 및 전파는 질량 연소율과 연소 촉진율로 분석하였다. 질량 연소율과 연소 촉진율을 계산하기 위하여 정적 연소실 내의 평균 압력을 측정하였다. 또한 shadow graph법을 이용하여, 초기 화염 생성과 화염 전파과정 전 영역을 가시화하였다. 토치 점화 장치를 사용한 경우에는 일반적인 스파크 점화와 비교하여 질량 연소율의 기울기가 증가하였고, 연소 촉진율도 개선된것을 확인하였다. 토치 점화 장치의 체적이 증가할수록 연소가 개선되었으며, 넓은 점화 표면을 제공하였다.

  • PDF

농약(Gramoxon)중독에 의한 화상으로 발생된 구강점막염 치험 (MANAGEMENT OF ORAL MUCOSITIS OWING TO CHEMICAL BURN BY INTOXICATION OF AGRICULTURAL CHEMICALS(GRAMOXON) : REPORT OF CASES)

  • 유재하;강상훈;김현실;백성흠;유태민;이지웅;정원균;김종배
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제29권2호
    • /
    • pp.123-127
    • /
    • 2003
  • Chemical burns onto oral mucosa which are infrequent, may result from contact with a wide variety of chemical agents. The degree of injury depends on the chemical, its concentration, duration of contact, and the natural penetrability and resistance of the tissues involved. Chemicals do not usually "burn" in that they do not cause destruction by hyperthermic activity. Rather, they damage tissue by causing coagulation of protein by one of several processes, reduction, oxidation, desiccation, corrosion, or vesication. Paraquat(Gramoxon) is the most frequently agricultural chemicals that induce the severe toxic reactions onto the organs of human body in Korea. The toxic reaction are composed of pulmonary edema and fibrosis, formation of hyaline membrane, inflammatory reaction and bleeding tendency, owing to the cell damage by the production of superoxide radicals. The contents of essential treatment in paraquat intoxication are commonly airway and breathing maintenance, gastric lavage, much hydration and diuresis, hemoperfusion and medications for the removal of the chemicals and the prevention of various complications. The sedative oral dressings, such as, orabase ointment application, warm saline gargling, lidocaine viscous gargling and oral gargling by the mixed solutions(tetracycline, prednisolone and 10% dextrose water) are important for the improvement of chemical oral mucositis and the comfortable feeding of diet. The authors managed properly two cases of oral chemical mucositis that were occurred by the incorrect use of agricultural chemicals(paraquat) and report the cases with the review of literatures about care of the chemical intoxication and oral mucositis.

Lye Stricture of the Esophagus Complicated by Carcinoma

  • 유회성;이호일;이정호
    • Journal of Chest Surgery
    • /
    • 제6권2호
    • /
    • pp.225-230
    • /
    • 1973
  • Five cases of esophageal cancer developed at the site of esophageal lye stricture were reported. Duration of lye stricture was between 13 and 40years, and all 5 cases had taken normal diet without appreciable troubles after recovery from the acute stage of burn till the suspected onset of esophageal malignaney. Outstanding symptoms of this grave condition were rather acute progressive dysphagia and frequent episodes of esophageal foreign bodies, Diagnosis could be confirmed easily by endoscopic biopsy in suspected eases, and all were epidermoid carcinoma histopathologically. Curative resection of this condition was made in neither of the cases, and their prognoses were more grave than other esophageal malignancies in our experience. The development of esophageal carcinoma at the site of corrosive esophagitis with resulting benign stricture has now been suspected as a cause and effect relationship between these two conditions, and Kiviranta: stated that the incidence of esophageal cancer in patients with lye stricture of longer duration is a thousand times higher than normal population. During last one decade the authors experienced 5 cases of esophageal carcinoma developed at the site of lye stricture of the esophagus among about 350 cases of lye burned esophagus at the Department of Thoracic & Cardiovascular Surgery, the National Medical Center in Seoul, Korea. In Korea they still use lye as a detergent in rural area, and there are still many persons ingesting lye for suicidal attempt or on accident. Lye stricture of the esophagus is, therefore, the most common esophageal disease needing surgical procedures, and the authors believe that there will be much more eases of lye stricture complicated by esophageal eareinoma repoted in near future in this Country.

  • PDF

Nd-YAG LASER MICRO WELDING OF STAINLESS WIRE

  • Takatugu, Masaya;Seki, Masanori;Kunimas, Takeshi;Uenishi, Keisuke;Kobayashi, Kojiro F.;Ikeda, Takeshi;Tuboi, Akihiko
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
    • /
    • pp.187-192
    • /
    • 2002
  • Applicability of laser micro welding process to the fabrication of medical devices was investigated. Austenitic stainless steel wire (SUS304) was spot melted and crosswise welded, which is one of the most possible welding process for the fabrication of medical devices, by using a Nd-YAG laser. Effects of welding parameters on the microstructure, tensile strength and corrosion resistance were discussed. In the spot melting, melted metal width decreased with decreasing the input energy and pulse duration. Controlling the laser wave to reduce laser noise which occurred in the early stage of laser irradiation made reasonable welding condition wider in the welding condition of small pulse duration such as 2ms. The microstructure of the melted metal was a cellular dendrite structure and the cell size of the weld metal was about 0.5~3.5 ${\mu}{\textrm}{m}$. Tensile strength increased with the decrease of the melted metal width and reached to a maximum about 660MPa, which is comparable with that for the tempered base metal. Even by immersion test at 318K for 3600ks in quasi biological environment (0.9% NaCl), microstructure of the melted metal and tensile strength hardly changed from those for as melted material. In the crosswise welding, joints morphologies were classified into 3 types by the melting state of lower wire. Fracture load increased with input energy and melted area of lower wire, and reached to a maximum about 80N. However, when input energy was further increased and lower wire was fully melted, fracture load decreased due to the burn out of weld metal.

  • PDF

사지에 발생한 편평상피 세포암 (Squamous Cell Carcinoma in the Extremities)

  • 최일용;김태승;조원민;최충규
    • 대한골관절종양학회지
    • /
    • 제1권1호
    • /
    • pp.98-104
    • /
    • 1995
  • 장기간 피부에 존재하는 궤양성 반흔이나, 만성골 수염의 누루 등에서 편평상피 세포암이 잘 발생하며 이들은 동통이 더욱 심해지거나 종괴의 크기가 갑자기 증가할때 그리고 분비물(discharge)이 늘어 날때는 악성 변화를 의심하여야 하며 조기에 생검을 하여 진단 후 적절한 수술적 치료가 필요하다. 또한 이들은 국소 림프절로의 전이가 빈발하므로 Grade II와 III에서는 예방적으로 국소 림프절에 방사선 조사(irradiation)를 고려해야 된다.

  • PDF