• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.466-469
• /
• 2007

Heat pumps are used for air-conditioning systems in commercial buildings, schools, and factories because of low operating and maintenance costs. These systems use the earth as a heat source in heating mode and a heat sink in cooling mode. Ground heat exchangers are classified by a horizontal type and vertical type according to the installation method. A horizontal type means that a heat exchanger is laid in the trench bored in 1.2 to 1.8 m depth. And a vertical type is usually constructed by placing small diameter high density polyethylene tube in a vertical borehole. Vertical tube sizes range from 20 to 40 mm nominal diameter. Borehole depth range between 100 and 200 m depending on local drilling conditions and available equipment. In this study, to evaluate the performance of single u-tube with bentonite grouting, single u-tube with broken stone grouting and double n-tube bentonite grouting of vertical ground heat exchangers, test sections are buried on the earth and experimental apparatus is installed. Therefore the heat transfer performance and pressure loss of these are estimated.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.735-736
• /
• 1998

Reduction of hot carrier degradation in MOS devices has been one of the most serious concerns for MOS-ULSIs. In this paper, three types of LDD structure for suppression of hot carrier degradation, such as spacer-induced degradation and decrease of performance due to increase of series resistance will be investigated. LDD-nMOSFETs used in this study had three different drain structure. (1) conventional ${\underline{S}}urface$ type ${\underline{L}}DD$(SL), (2) ${\underline{B}}uried$ type ${\underline{L}}DD$(BL), (3) ${\underline{S}}urface$urface ${\underline{I}}mplantation$ type LDD(SI). As a result, the surface implantation type LDD structure showed that improved hot carrier lifetime to comparison with conventional surface and buried type LDD structure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.2
• /
• pp.80-84
• /
• 2014

Phosphorus (P) is an essential nutrient for all living organisms. P is mostly obtained from mined rock phosphate. However, existing rock phosphate reserves could be exhausted in the next 50-100 years. As Korea is totally dependent on imported rock phosphate, we should seek for solution to overcome the P depletion by efficient use and recycling. For this, this study suggested a P flow model to identify the location and flow route of P in urban area based on traditional material flow analysis. The type of P entering the urban areas are fertilizer, food and feed. Each type of P is used in agriculture, human consumption and animal husbandry. After going through each process, P is moved to waste management facilities within food waste, excreta and sewage. Some portion of P in waste are buried, incinerated and discharged, which can be reservoir of P in the future.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.1
• /
• pp.96-101
• /
• 2001

In designing the greenhouse structures, snow and wind loads must be estimated on the basis of the probability of occurrence of snow or wind storms of a given intensity. The recurrence interval chosen depends on the standard durable years and safety factors of the greenhouse. This study was carried out to find the standard durable years of pipe framed greenhouses. Bend test for metallic materials was conducted on samples of galvanized steel pipes being used in greenhouse frames. A secular change of collapse loads and flexural rigidity for galvanized steel pipes were analyzed with the parts buried in the ground and exposed in the atmosphere. From those experimental results and corrosion rate of galvanized film, the standard durable years for pipe framed greenhouses are estimated as follows ; the small scale pipe houses of movable type is 7∼8 years and the large scale pipe houses of fixed type is 14∼15 years.

• The Journal of Information Systems
• /
• v.30 no.1
• /
• pp.105-121
• /
• 2021

Purpose Today, through digital services, many people enjoy a conveient and comfortable life. Nevertheless, it is easy to find people in our daily lives who are buried in work without any payment that we did not do before digital services. Such un-payed works under digital environment are called digital shadow works. The purpose of this study is to classification and dynamics of digital shadow works and to suggest research direction. Design/methodology/approach Based on two dimension, voluntary participation ('should' type and 'want' type) and work orientation (management-operation), digital shadow works were classified into four categories - chore, makeup, routine, and quest. Findings In digital shadow work there are four types of dynamics - routine and quest, makeup and chore, makeup and quest, and quest and actions in offline. According to the classification and analysis of dynamics, three research directions in digital shadow work are suggested and discussed- digital shadow works operation mechanism considering dynamics, expansion of existing user theories based on survey method by digital shadow works and social influences by digital shadow works.

• Journal of architectural history
• /
• v.26 no.6
• /
• pp.77-88
• /
• 2017

Ordinary people generally bury or burn placenta when the baby was born. But, Joseon royal family put placenta in pot and then buried it in propitious site praying for good health and long life. After that baby had become the king of Joseon, people built stone figures formed fixed type at that place. It is called gabong-taesil(加封胎室). The purpose of this study is to figure out the type and characteristics of the King Taejo's taesil in Joseon Dynasty. The King Taejo's taesil had built first as soon as Joseon was established circa 1393, and repaired largely in 1689. Since then, this was damaged by the Japanese Empire and assembled in recent days at near place from the original place. Center piece of taesil remains the original form, and the rest of stone figures is assumed to be rebuilt in 1689. But, some materials like sangseok(裳石) and jeonseok(磚石) are assumed that are original stone figures or were made, assembled by the style of then. Considering most of remained taesil is a relic of the latter part of Joseon Dynasty, the King Taejo' taesil has high cultural value as the first gabong-taesil of Joseon Dynasty inheriting Goryeo Dynasty type.

• Korean Journal of Heritage: History & Science
• /
• v.33
• /
• pp.36-67
• /
• 2000

Square-shaped moated burial precincts(方形周溝墓) can be classified into type I that has bridges only at the comers, type II that has bridges at the comers and sides, type III that has bridges only at the sides, type IV that is surrounded by the moat without bridges, type V that has its sides less than those of type I ~ V by 1 or 2, and type VI that has the round-shaped ground. But the time differences among the types are not known yet. For the burial appliances of square-shaped moated burial precincts, there are stone coffins, pit burials and jar burials. The major burial appliances situated in the mound are stone coffins and pit burials, and jar burials are subsidiary appliances that were buried at the shoulder part of the mound or at precincts. According to the case of Gwanchang-ri KM423, grave mounds, which arc closely related with the burial appliances, were built by heaping up the earth in and around the precinct as low as only enough to protect the burial appliances. Considering the relics unearthed in the burial compartment of KM437, the time when square-shaped moated burial precincts were formed is estimated to be the age when Songguk-ri type earthenware and clay stripes earthenware co-existed. It was the early Iron Age when ironware began to sp read in this country. Emerging first in that age, square-shaped moated burial precincts were presumably formed until around the end of BC or the beginning of AD, when KM404 and KM423, which were unearthed with plain earthenware, grey earthenware and ironware, were formed. When analyzing the form of small-sized graveyards in precincts, the unearthed relics and the locations, the people who formed square-shaped moated burial precincts were considered as those who had a culture comprising clay stripes earthenware, which appears newly in the Songguk-ri type earthenware of native, and ironware, and a settled agricultural society based on paddy fields and labor forces of family units.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.2
• /
• pp.103-113
• /
• 1999

Jeupjang like salted soybean paste with vegetable is the Korean traditional side order eating at table. Bibliographical studies on the Jeupjang in historic books such as Jeungbo-Sanlim-Keongjae(Re-edition of agriculture economic), Imwon- Keongjae Ji(Book of country economic) and Keuhap-Chongseo(Handbook of household) described the Korean food in the 18 century carried out. In addition, investigation and analytical studies on various home-made Jeupjang in present was accomplished. Jeupjangs were classified into three types according to variety preparing methods. Three types were fermented soybean paste (Doenjang) type using traditional Meju(soybean cake stater) for Jeupjang, salted pickle (Jangachi) type buried cucumber and eggplant into soybean paste or soysauce (Kanjang), and salted sauer kraut (Kimchii) type prepared vegetable in Jeupjang-Meju mash. The procedures for producing Jeupjang were Jeupjang-Meju making, and mixing vegetable with Meju powder into brine. At last process was fermented in horse wastes or grasses for 7-14 days. But manufacturing methods of Jeupjang before the 18 century were different in present. Nowadays glutinous rice, red pepper powder and various vegetable were used for domestic Jeupjang.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.630-633
• /
• 2008

Geothermal heat pump systems use the earth as a heat source in heating mode and a heat sink in cooling mode. These systems can be used for heating or cooling systems in farm facilities such as greenhouses for protected horticulture, cattle sheds, mushroom house and etc. A horizontal type means that a geothermal heat exchanger is laid in the trench buried in 1.2 to 1.8 m depth. Because a horizontal type has advantages of low installation, operation and maintenance costs compared to a vertical type, it is easy to be adopted to agriculture. In this study, to heat and cool farm facilities and obtain basic data for practical application of horizontal geothermal heat pump system in agriculture, a horizontal geothermal heat pump system of 10 RT was installed in greenhouse. Heating and cooling performance of this system was estimated. The horizontal geothermal heat pump used in this study had heating COP of 4.57 at soil temperature of $14^{\circ}C$ with depth of 1.75m and heating COP of 3.75 at soil temperature of $7^{\circ}C$ with the same depth. The cooling COP was 2.7 at ground temperature at 1.75m depth of $25.5^{\circ}C$ and 2.0 at the temperature of $33.5^{\circ}C$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.200-205
• /
• 2008

Stability and durability of the artificial reefs (ARs) installed for wildstock enhancement have been a key issue. We surveyed the stability of 4,044 artificial reefs installed at 5 sites (Gangeung, Donghae, Samcheok, Goseong. and Yangyang) along the Gangwon coast of the East Sea (Sea of Japan) through which 1 to 5 typhoons pass annually. The ARs surveyed were 7 types aging 1 to 4 years. The side scan sonar (SSS) and scuba diving surveys confirmed that the ARs stability was age and type-dependent. A total of 85.56% ARs remained safe. the rest 14.44% being influenced by physical parameters of the waters such as wave extremes mostly caused by typhoons. An interesting observation was that the AR were particulatly vulnerable to the wave extremes in the first year of installation, thereafter being less damageable. Representative damages of the ARs were capsized (0.20%). broken (5.79%), sunk (0.27%), and buried (8.18%). By type, dice reef was most stable. while semicircle branch reef was most vulnerable.