• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.865-874
• /
• 2019

A controller for an underwater glider is presented. Considered underwater glider is a torpedo-shaped autonomous underwater vehicle installing adjustable buoyancy bag and movable battery in it. The controller is composed of an LQR controller to maintain zigzag vertical movement for gliding and two PD controllers to control elevator/rudder angles. The LQR controller controls the pumping speed into the buoyancy bag and the moving speed to locate the battery. One of the PD controller controls the elevator angle to assist the LQR controller, and the other controls the rudder angle to adjust the direction of the underwater glider. A reduced order Luenberger observer is adopted to estimates the center of gravity of the glider and the buoyancy mass that are essential but cannot be measured. Mathematical simulation using Matlab proved the validity of the proposed controller to obtain better performance than conventional LQR only controller under the influence of sea current.

• Journal of Advanced Research in Ocean Engineering
• /
• v.3 no.1
• /
• pp.25-31
• /
• 2017

Generally, underwater gliders do not have separate propellers for their forward movement. They derive a propulsive force due to the difference between their buoyancy and gravity. The attitude of an underwater glider is controlled by changing the relative position of the buoyancy center and mass center. In this study, we derived nonlinear 6-DOF dynamic and mathematical models for the motion controller and buoyancy controller. Using these equations, we performed dynamic underwater glider simulations and verified the suitability of the design and dynamic performance of the proposed underwater glider.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.21-29
• /
• 2017

In this paper, we studied the control of the hybrid underwater glider (HUG), which has the advantage of high precision route search function and long-term mission capability. Dynamic modeling of HUG is based on numerical model of the attitude controller and buoyancy engine, thruster. We designed the control part considering the smooth control and precise sailing of HUG. A buoyancy engine capable of inhaling water is designed to control the buoyancy of HUG. And mass shifter carrying the battery was designed for controlling pitching motion of HUG. A control system for controlling the buoyancy engine and the attitude controller was constructed. In order to verify performance, we performed water tank test using manufactured HUG.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2018

The floating sculptures in the form of ad-ballon commonly used ropes in order to hold on. Relatively air flow is much less indoor than outdoor. Users of buoyancy sculptures hope to be able to maintain their desired posture without being fixed. This study applied drone technology to buoyancy sculptures. The drones can be moved vertically and horizontally, and the posture can be maintained, so buoyancy sculptures are easy to apply. Therefore, we have studied the control system of buoyancy sculpture using drone technology. Also, a control system that can maintain the desired posture at a constant height was studied. The overall shape was a light fiber material and helium gas for zero buoyancy to support the sculpture. The system configuration was STM32F103CB from ARM. In addition, the gyro and acceleration, geomagnetic sensors and motors are composed of small and medium size BLDC motors. The scheduling of the control system in the configuration of the control device was carefully considered. Because the role of the whole component becomes very important. The communication between the components is divided into the sensor fusion and the interface communication with the whole controller. Each communication technology is designed to expand. This study was implemented to actively respond from the viewpoint of posture control using the drone technology.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.24-34
• /
• 1996

In ordaer to hold an underwater vehicle at a certain depth, buoyancy that acts on the underwater vehicle can be modulated. In this research, buoyancy that could control depth of underwater vehicle is generated by a buoyancy bag. Solenoid valves are operated by pulse with modulation(PWM) method. State equation, in consideration of the volume of buoyancy bag, pressure inside bag, and dynamic of the underwater vehicle, is derived. This system is very unstable, inculdes modelling error and nonlinearity. In depth control system, maintanance of performance is required., anainst vatiation of systerm parameter and operating depth, and designed. Through the computer simulation, performance is comparerd for each controllers.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.8
• /
• pp.688-693
• /
• 2013

This paper proposes a new method on attitude control of an underwater robot by using five ABTs (Attitude Ballast Tank). A pipe is connected to the bottom of the ABTs and transfers water by a pump, while another pipe is connected to the top of the ABT to transfer air. The buoyancy center of the underwater robot can be changed by means of the water transfer. This way, the attitude of the underwater robot can be maintained and/or controlled as desired. The changes of the center of gravity and the buoyancy central are estimated by a Lagrangian function which is similar to that for an inverted pendulum. The controller in this paper is designed by modeling of the underwater robot and selecting suitable gains of a PD controller which has fast response characteristics. This paper shows the possibility of the attitude control of an underwater robot by changing the center of gravity and the buoyancy center of the robot. Moreover, experimental results verify that the controller is effective in maintaining Roll/Pitch of the underwater robot with very low power consumption.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.6
• /
• pp.546-551
• /
• 2014

This paper addresses a feedback linearization control problem for the nonlinear dynamics of an underwater glider system. We consider the buoyancy and moment as control inputs, which come from the mass variation and elevator control, respectively. Moment-to-force coupling increases the nonlinearities, which make the controller design difficult. By using a feedback linearization technique, we convert the nonlinear underwater glider to an equivalent linear model and design a linear controller. The controller for the equivalent converted linear system is designed using sufficient conditions in terms of linear matrix inequalities. Then, the control input of the nonlinear model of an underwater glider is formulated from the linear control input. An experimental examination is implemented to verify the effectiveness of the proposed technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.516-521
• /
• 1993

In order to hold a underwater vehicle at a depth, we can modulate buoyancy that acts on the underwater vehicle. In this research, by using a ballon, we was able to generate buoyancy that could control depth in which vehicle was operate. And in order to control flux of air that was flowed in balloon, we used solenoid valve, relief valve and so on. We derived differential equations of volume of balloon, pressure of inside of balloon, dynamic of underwater vehicle, and air flux for the simulation and linearized these differential equation. So we designed LQG/LTR controller, and applied the controller to nonlinear system. Through the simulation, we compares the nonlinear system with the linear system and investigated the operation of solenoid valve.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.5
• /
• pp.311-318
• /
• 2017

A reduced order observer is developed for depth control of a hybrid underwater glider which combines the good aspects of a conventional autonomous underwater vehicle and a underwater glider. State variables include the center of gravity of the robot and the weight of the buoyancy bag, which can not be directly measured. By using the mathematical model and available information such as directional velocities, accelerations, and attitudes, we developed a Luenberger's reduced order observer to estimate the center of gravity and the buoyancy weight. By simulations using Matlab/Simulink, the efficiency of the proposed observer is shown, where a LQR controller using full state variables is adopted as a depth controller.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.47-52
• /
• 2004

Greater holding force of an anchor is required for maintaining the position of a larger floating structure. According to the series of model tests of pile anchors with movable fluke, the square type pile anchor, with fluke, showed more than 6 times of the uplift pulling force, compared to the same type pile anchor, without fluke. This uplift force is 100 times its weight. When the water depth is more than 40m, It is difficult to install the pile anchor. For a convenient installation method, a type of manipulator is proposed for the separation of a weight and buoyancy controller, using TRIZ.