• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.493-502
• /
• 2012

Syngas laminar burning velocity measurements were carried out at atmospheric pressure and ambient temperature using the Bunsen flame configuration with nozzle burner as a fundamental study on flame stability of syngas fuel. Representative syngas mixture compositions ($H_2$:CO) such as 25:75%, 50:50% and 75:25% and equivalence ratios from 0.5 to 1.4 have been conducted. Average laminar burning velocities have been determined by the stabilized nozzle burner flames using the angle method, radical surface area method and compared with the data obtained from the other literatures. And the results of each experimental methodologies in the various composition ratios and equivalence ratios were coincided with the result of numerical simulation. Especially, it was confirmed that there was necessary to choice a more accurate measurement methodology even the same static flame method for the various composition ratios of syngas fuel including hydrogen. Also, it was reconfirmed that the laminar burning velocities gradually increased with the increasing of hydrogen content in a fuel mixture.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.362-367
• /
• 2003

It is shown that the effect of variable parameters on flame structures and NOx emissions in the laminar partially premixed methane-air flames with a co-axial Bunsen burner. Objectives of this paper is to understand the effects of flow variables on NOx emissions and the flame structure with OH chemiluminescence, including reconstructed image by abel inversion processing at each conditions. A fuel flowrate of 200 [cc/min] was fixed and the amount of air was varied from 400 to 1200 [cc/min]. The experimental variables were equivalence ratio(${\Phi}$ fuel split percentage(${\sigma}$ and inner tube recess(x/D). Flow conditions were ranged from $1.36{\sim}4.76$(equivalence ratio), $50{\sim}100$(fuel split percentage) and $0{\sim}20$(inner tube recess). NOx analyzer and ICCD camera with a OH filter were used as a main experimental apparatus. In addition, Abel inversion, which is a kind of tomography and valuable to estimate a two-dimensional structure of co-axial flames from cubical information, was employed for combustion diagnostics. Results from this study indicate that the main effects depend on equivalence ratio and next sigma, x/D for NOx production and OH formation. Throughout Abel inversion, we could affirm the maximum position and the tendency of OH radical intensity by variants at five axial heights above the burner exit.

• 한국연소학회지
• /
• 제19권1호
• /
• pp.17-28
• /
• 2014

In this study, the laminar burning velocity of syngas fuel($H_2/CO$) and flame structure with various hydrogen contents were studied using both experimental measurements and detailed kinetic analysis. The laminar burning velocities were measured by the angle method of Bunsen flame configuration and the numerical calculations including chemical kinetic analysis were made using CHEMKIN Package with USC-Mech II. A wide range of syngas mixture compositions such as $H_2$ : CO = 10 : 90, 25 : 75, 50 : 50, 75:25 and equivalence ratios from lean condition of 0.5 to rich condition of 5.0 have been considered. The experimental results of burning velocity were in good agreement with previous other research data and numerical simulation. Also, it was shown that the experimental measurements of laminar burning velocity linearly increased with the increment of $H_2$ content although the burning velocity of hydrogen is faster than the carbon monoxide above 10 times. This phenomenon is attributed to the rapid production of hydrogen related radicals such as H radical at the early stage of combustion, which is confirmed the linear increase of radical concentrations on kinetic analysis. Particular concerns in this study are the characteristics of burning velocity and flame structure different from lean condition for rich condition. The decrease of OH radicals and double peaks are observed with $H_2$ content in rich condition once $H_2$ fraction exceeds over threshold.

• 해양환경안전학회지
• /
• 제27권1호
• /
• pp.153-160
• /
• 2021

아산화질소(Nitrous oxide, N2O)는 지구온난화 물질의 하나로 이산화탄소에 비해 지구온난화효과가 310배 강하고 분해하는데 120년이 소요되기 때문에 오존층 파괴에 주범으로 알려져 있다. 따라서 본 연구에서는 N2O를 저감하기 위해 고온 열분해 기술을 적용하여 N2O 저감 공정에서 발생하는 NOx 배출 특성에 대해 조사하였다. 고온 유동장을 형성하기 위해 동축 분젠 예혼합 화염을 열원으로 채택하였으며 실험 변수로는 노즐출구속도, 동축류 속도 및 N2O 희석률로 설정하였다. 실험 결과, NO 생성률은 노즐출구속도 및 동축류 유량에 관계없이 N2O 희석률이 증가함에 따라 증가하였다. N2O의 경우에는 연소 불안정성(Kelvin Helmholtz 불안정)이 억제된 안정된 예혼합 화염에서 다량으로 배출되었는데, 이는 화염 면 부근에서 감소된 N2O의 체류시간으로 인해 열분해 시간이 충분하지 않기 때문인 것으로 사료된다. 따라서 N2O의 저감 효율을 증진시키기 위해서는 K-H 불안정성이 발생되는 노즐출구속도를 선정하여 화염 면 부근에서 발생되는 와류(toroidal vortex) 형태의 유동 구조를 형성하는 것이 N2O의 체류시간을 증가시키는데 효과적인 것으로 판단된다.

• 한국연소학회지
• /
• 제6권2호
• /
• pp.36-42
• /
• 2001

Usually, we use the flame thickness and turbulence scale to classify the flame structure on a phase diagram of turbulent combustion. The flame structure in turbulence is still in debate, and many studies have been done. Since the flame motion is rapid and its reaction zone thickness is very thin, it is difficult to estimate the flame thickness. Here, we propose a new approach to determine the reaction zone thickness based on ion current signals obtained by an electrostatic probe, which has enough time and space resolution to detect flame fluctuation. Since the signal depends on the flow condition and flame curvature, it may be difficult to analyze directly these signals and examine the flame characteristics. However, ion concentration is high only in the region where hydrocarbon-oxygen reactions occur, and we can specify the reaction zone. Based on the reaction zone existing, we estimate the reaction zone thickness. We obtain the thickness of flames both in the cyclone-jet combustor and on a Bunsen burner, compared with theoretically predicted value, the Zeldovich thickness. Results show that the experimentally obtained thickness is almost the same as the Zeldovich thickness. It is concluded that this approach can be used to obtain the local flame structure for modeling turbulent combustion.

• 한국광학회지
• /
• 제9권4호
• /
• pp.264-269
• /
• 1998

분젠버너에서 당량비에 따른 연료부족, 적정, 과잉의 경우로 예혼합된 프로판-공기 화염에서 발생된 C2, CH, OH 라디칼의 농도형태 측정을 영상처리법을 이용하여 가시화하였다. 영상처리 시스템에서 협대역 통과필터, 영상증폭장치, CCD 및 PC를 사용하여 라디칼의 발광 파장대의 영상을 처리하였다. 영상처리 시스템을 통하여 화염에서 라디칼의 반응영역을 관찰하고, 라디칼의 농도분도를 예측할 수 있었다. 반응영역에서 각각의 라디칼의 공간적 분포는 CmHn 계열 화염의 반응 메카니즘을 이해할 수 있는 충분한 정보를 제공하였다. 이 정보로부터 C2 라디칼의 형광은 반응영역 앞부분에 먼저 나타나며 CH와 OH 라디칼의 형광은 화염의 하류부분에 분포함을 알 수 있었다.