• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.439-445
• /
• 2021

In view of the complex geometric structure of the rod bundle channel and the limitation of the current CHF visualization experiment technology, it is very difficult to obtain the rod bundle CHF mechanism directly through the phenomenon of the rod bundle CHF visualization experiment. In order to obtain the applicable CHF mechanism assumption for rod bundle channel, firstly, five most representative DNB type round tube CHF mechanistic models are obtained with evaluation and screening. Then these original round tube CHF mechanistic models based on inlet conditions are converted to local conditions and coupled with subchannel analysis code ATHAS. Based on 5 × 5 full-length rod bundle CHF experimental data independently developed by Nuclear Power Institute of China (NPIC), the applicability research of each model for CHF prediction performance in rod bundle channel is carried out, and the commonness and difference of each model are comparatively studied. The CHF mechanism assumption of superheated liquid layer depletion that is most likely to be applicable for the rod bundle channel is selected and two directions that need to be improved are given. This study provides a reference for the development of CHF mechanistic model in rod bundle channel.

• Journal of Korea Multimedia Society
• /
• v.18 no.4
• /
• pp.506-523
• /
• 2015

The intent is to determine whether or not the custody transfer is helpful for data transmission in challenging underwater communications when running Bundle protocol or underwater protocols. From the point of view defending side, Underwater Acoustic Network (UAN) will be a serious threat for its strong functionality long rang and high precision of surveillance and detection. Therefore, countermeasures must be taken to weaken its effect. Our purpose is analyzed that how to benefit from the UIoT to learn from, exploit and preserve the natural underwater resources. Delay/Disruption Tolerant Network (DTN) is essential part of the network heterogeneity communication network. The vulnerability and potential security factors of UIoT are studied thereafter. Security mechanisms for an underwater environment are difficult to apply owing to the limited bandwidth. Therefore, for underwater security, appropriate security mechanisms and security requirements must be defined simultaneously. The paper consists of mathematical and security model. Most important point of view in the security challenges of effective Buffer and Storage management in DTN.

• Applied Microscopy
• /
• v.31 no.4
• /
• pp.367-374
• /
• 2001

Leaves of two developmental stages of Salsola species, young and mature, were examined to reveal the structural and functional relationships in the photosynthetic tissue using anatomical and ultrastructural criteria. Both young and mature leaves had Kranz anatomy of the Salsolid type with two layers of chlorenchyma on the leaf periphery: an outer layer of palisade mesophyll cells and an inner layer of compact bundle sheath cells with centripetally arranged organelles. The chlorenchyma was continuous in young leaves , while it was discontinuous in mature leaves. The main vascular bundle occupied the central position in the leaf. but the small peripheral vascular bundles were in contact with the chlorenchyma. Structural dimorphism of chloroplasts was obvious in bundle sheath cells of mature leaves exhibiting noticeable grana reduction, whereas mesophyll cell chloroplasts had well developed grana in all cases. Plasmodesmata were less numerous and rather simple in young leaves relative to well-developed secondary plasmodesmata of the later stage. According to the current data, features of two stages of Salsola leaves corresponded to NADP-ME bio-chemical subtype on the basis of photosynthetic cell ultrastructure. Implications of developing such anatomical and ultrastructural data of Sulsola species and biochemical characteristics reported in other C-4 species have been discussed.

• Mycobiology
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2003

Detailed structures of ectomycorrhizae formed in Pinus roots were observed with various microscopes: light, fluorescence, and scanning electron microscopes. The mantles and Hartig nets commonly found in the structure of ectomycorrhiza were newly observed according to developmental stage by various staining. The mycelia were observed to be composed of coiled types on the surface of epidermal root during early stage and fused to form mantles of smooth fungal layers, loosing mycelia with some viscous liquid secreted. The ectomycorrhizal hyphae in anatomical roots penetrated the cortical layer and formed obviously mantle and Hartig net. The round spots of ectomycorrhizal mycelia were observed morphological distribution from the cortical layer to vascular bundle of stele in the ectomycorrhizal roots of Pinus species and especially scattered at the area of meristem at the root tip as longitudinal sections. Those mycelia penetrated seemed to move into other roots by means of vascular bundle of ectomycorrhizal roots and newly form ectomycorrhizal roots of dichotomous branches.

• Applied Microscopy
• /
• v.52
• /
• pp.6.1-6.5
• /
• 2022

We examined the morphology of the fertilized egg and the fine structure of fertilized egg envelopes of Poropanchax normani belonging to the family Poeciliidae, also known as Norman's lampeye using light and electron microscopes. The fertilized eggs with narrow perivitelline space were found to be spherical and demersal, additionally containing small oil droplets in the vitelline membrane. Further, a bundle of adhesive filaments was observed to be present on one side of the fertilized egg. These filaments possessed remarkably high elasticity and were approximately 1-3mm in length. The size of the fertilized egg was determined to be about 1.49 ± 0.07mm (n=30). The outer surface appeared smooth, and adhesive filaments originating at different location of the surface of the envelope were found to be distributed around the egg envelope and were joined together to form a single long bundle in scanning electron microscopic observation. A peak-like structure formed of several straight wrinkles was observed around the micropyle. However, the complete structure of the micropyle could not be studied due to the depth at which it was located. Additionally, the total thickness of the egg envelope was ascertained to be approximately12.5-14.5㎛. The egg envelope consisted of two distinct layers, an outer electron dense layer and an inner lamellar layer, further consisting of 10 sublayers of varying thicknesses. Collectively, it was observed that the morphological characteristics of the fertilized egg, fine structures surrounding the micropyle, outer surface, adhesive structure consisting adhesive filaments, and sections of fertilized egg envelope displayed species specificity.

• Nuclear Engineering and Technology
• /
• v.45 no.7
• /
• pp.895-910
• /
• 2013

The reflood test data from the rod bundle heat transfer (RBHT) test facility showed that the grids in the upper portion of the rod bundle could become wet well before the arrival of the quench front and that the sizes of liquid droplets downstream of a wet grid could not be predicted by the droplet breakup models for a dry grid. To investigate the water droplet generation from a wet grid spacer, a viscous linear temporal instability model of the water sheet issuing from the trailing edge of the grid with the surrounding steam up-flow is developed in this study. The Orr-Sommerfeld equations along with appropriate boundary conditions for the flow are solved using Chebyshev series expansions and the Tau-Galerkin projection method. The effects of several physical parameters on the water sheet oscillation are studied by determining the variation of the temporal growth rate with the wavenumber. It is found that a larger relative steam velocity to water velocity has a tendency to destabilize the water sheet with increased dynamic pressure. On the other hand, a larger ratio of steam boundary layer to the half water sheet thickness has a stabilizing effect on the water sheet oscillation. Droplet diameters downstream of the spacer grid predicted by the present model are found to compare reasonably well with the data obtained at the RBHT test facility as well as with other data recently reported in the literature.

• The Plant Pathology Journal
• /
• v.19 no.2
• /
• pp.85-91
• /
• 2003

Pre-treatment with DL-3-aminobutyric acid (BABA) in the cucumber plants caused the decrease of disease severity after inoculation with anthracnose pathogen Colletotrichum orbiculare. In this study, ultrastructures of the vascular bundle and the infection structures in the leaves of BABA-treated as well as untreated cucumber plants were observed after inoculation with the anthracnose pathogen by electron microscopy. The ultrastructures of vascular bundle in the leaves of BABA-treated plants were similar to those of the untreated plants except plasmodesmata. In the BABA-treated plants, the plasmodesmata were more numerous than in the untreated plants, suggesting that the BABA treatment may cause the active transfer of metabolites through the vascular bundle. In the leaves of untreated plants, the fungal hyphae were spread widely in the plant tissues at 5 days after pathogen inoculation. Most cellular organelles in the hyphae were intact, indicating a compatible interaction between the plant and the parasite. In contrast, in the leaves of BABA pre-treated plants the growth of most hyphae was restricted to the epidermal cell layer at 5 days after inoculation. Most hyphae cytoplasm and nucleoplasm was electron dense or the intracellular organelles were degenerated. The cell walls of some plant cells became thick at the site adjacent to the intercellular hyphae, indicating a mechanical defense reaction of the plant cells against the fungal attack. Furthermore, hypersensitive reaction (HR) of the epidermal cells was often observed, in which the intracellular hyphae were degenerated. Based on these results it is suggested that BABA causes the enhancement of defense mechanisms in the cucumber plants such as cell wall apposition or HR against the invasion of C. orbiculare.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.84-90
• /
• 2001

To investigate morphological characteristics of zephyr produced from two bamboo species, Phyllostachys nigra var. henonis and Gigantochloa apus, basic anatomic properties were examined by scanning electron microscopy and image analysis. According to SEM observation, zephyr from Phyllostachys nigra var. henonis was not of uniform in shape and showed macro crack between vascular bundle sheaths. This may be attributes to the sclerenchymatous fibers connected closely, thus resulting in difficult separation of intercellular layer. Zephyr from Gigantochloa apus was of uniform in shape, which may be caused by easy separation of intercellular layer of sclerenchymatous fibers having thin cell wall and large cell lumen. By image analysis in cross section of two species, the ratio of vascular bundle sheaths and cell wall ratio of sclerenchymatous fibers were examined. The ratio of vascular bundle sheaths in Phyllostachys nigra var. henonis was lower than that in Gigantochloa apus. However, cell wall ratio of sclerenchymatous fibers in Phyllostachys nigra var. henonis was higher than that in Gigantochloa apus.

• Journal of Plant Biology
• /
• v.28 no.1
• /
• pp.21-28
• /
• 1985

The bipinnate-compound leaf of Parkia clappertoniana has prominent, long petiole with a pulvinal base. The pulvinus has wood, periderm, lenticels and extensive cortical layer. Its vascular bundles are elongated with alternating rays. The vascular bundles of the petiole, rachis and veins are oval, with conspicuous bundle caps. Stomatal complex is predominantly paracytic with occasional occurrence of anomocytic stomata near the midrib. The oval stomata have conspicuous stomatal ledges. Trichomes are unicellular, acicular and restricted to the rachis, petiole and pinnule mid-ribs and margin. Ecological and taxonomic significance of features is discussed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.3
• /
• pp.157-170
• /
• 1993

To prove the effct of semi-rigid fixation which utilize wire and rigid fixation which utilizes miniplate toward cranio-facial growth and development of growing children for teenagers, 28 rabbits-6 weeks, about 1.5kg-were experimented. They were classified three groups the semi-rigid group was 12 rabbits which were fixed with 26 gauge stainless steel wire to cross a fronto-nasal suture, the rigid group was the other 12 rabbits which were fixed with miniplate and screw, the control group was 4 rabbits which were get rid of only periosteum. The sample of fronto-nasal of rabbits which were sacrified after 2 weeks, 4 weeks, 8 weeks, and 12 weeks of the operation were investigated and made a comparative study with the light microscops. 1. At the control group, the central part of bony suture was connected with colagen bundle, the osteoblastic layer was investigated at the bony ending, new bone which covered the inside and outside faces of the bone suture was formed between periosteum. 2. Two weeks later from the experiment, ran slightly irregularly the collagen bundle which connects both bony endings of the rigid group. 3. Four weeks later from the experiment, collagen bundle of bone surface were arranged parally a little and comparing to the semi-rigid group, newly formed woven bone of surface of the adjacent bone was made obviously a little. 4. Eight weeks later from the experiment, collagen bundle which is located between both bony ending become close. Both the semi-rigid group and the rigid group showed significant formation of new bone at the periosteum and the bone surface. 12 weeks later from the experiment, both the semi-rigid group and the rigid group showed the regular running in the collagen bundle and smooth, dense periosteum. Then they assumed a similar aspect of the control group. I think that it does not give the influence to the cranio-facial growth of children or teenager to utilize a rigid fixation for a short period. Because as the time goes on, the surface of the bone suture was recovered and adjacent bone surface of the miniplate fixation showed compensatory growth, although both the semi-rigid group which utilized wire and rigid group which utilized a miniplate brought about the change of the area of the bone suture at the early period.