• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2553-2558
• /
• 2014

Military rotorcraft should be designed taking into account the condition of the fuel cell bullet impact. The internal fluid pressure, stress of metal fitting and fuel cell, bullet kinetic energy can be included as the design factor for the fuel cell. The best way to obtain the important design data is to conduct the verification test with actual product. But, the verification test requires huge cost and long-term effort. Moreover, there is high risk to fail because of the sever test condition. Thus, the numerical simulation is required to reduce the risk of trial-and-error together with prediction of the design data. In the present study, the bullet impact simulation based on SPH(smoothed particle hydrodynamics) is conducted with the commercial package, LS-DYNA. As the result of the numerical simulation, the internal pressure of fuel cell is calculated as 350~360MPa and the equivalent stress caused by hydro-ram effect is predicted as 260~350MPa on metal fittings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.615-622
• /
• 2020

Frangible bullets, which are shredded after impact on a target, reduce the possibility of both ricochet and unexpected injury in shooting training and in mission acts in dams, nuclear power plants, and cultural properties. Reducing the levels of hazardous materials in shooting ranges, such as lead, has become an important agenda for the government and environmental groups. In this study, the shape of a frangible bullet was designed for efficient shredding, and the safety and reliability were confirmed by actual firing under different process conditions. In addition, the physical characteristics, such as compaction pressure, density, and frangibility of each process, were compared by analyzing the microstructure of the sintered frangible bullet. The experiment revealed the smallest fragmentation after impact on the target under the following conditions: Cu-Sn 85:15; sintering temperature, 600℃; sintering time, one hour. Further development of the process conditions and experimental methods will contribute to the performance and environmental improvement of a frangible bullet.

• Journal of Sensor Science and Technology
• /
• v.28 no.5
• /
• pp.318-322
• /
• 2019

In shooting training, an impact point identification system that uses the impact wave of the bullet to check the impact point in the target plate has been recently used. Acoustic sensors used in these systems must be able to detect shock waves of high sound pressure levels and be both waterproof and dustproof for rainy weather and dusty environments, respectively. In this study, membranes with excellent waterproof, dustproof, and sound transmitting characteristics were selected through a characteristics test; a protection cap was installed to install the selected materials. After coupling the produced protection cap to the acoustic sensor housing, the sensitivity and phase characteristics of the acoustic sensor were checked. Through the waterproof and dustproof test, the performances of its sensitivity and phase characteristics were confirmed. Finally, the normal shockwave of a 5.56 mm diameter bullet was measured using a shockwave detection signal collecting plate equipped with a prototype of the acoustic sensor at a 100 m firing range.

• Trans-
• /
• v.8
• /
• pp.79-93
• /
• 2020

The main purpose of this article is to discuss the impact of "Dance Smash" TV show on Chinese dance, which uses the combination of dance and new media technology as the core content of the program. "Dance Smash", as a dance communication TV program for the public, first considers the entertainment attributes of variety shows. Spread the dance art on the basis of meeting the public's aesthetic needs, thereby expanding the popular living space of dance art. The use of 'moment of the storm' has let the general audience of non-dance majors feel the technical charm of dances, thus playing a healthy promotion role. However, whether "Bullet Time", a type of dance program that has had a successful case in the West, can also have a positive impact on the mass communication of dance in the localization of China, this is what questions and seeks of this article.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.97-99
• /
• 2012

A pressure-based BOIK model considering Shock to Detonation Transition(SDT) and damage due to external fragment or bullet stimuli impact on energetic materials and analytical approach for determination of free parameters are proposed. The rate of product mass fraction(${\lambda}$) consists of ignition term that represents the initiation due to shock compression and growth term that describes propagation of detonation wave and strain term representing the morphological deformation induced by external impact.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.92-97
• /
• 2010

Fire simulation by using a computational fluid dynamics model and examination of the fires at indoor shooting ranges broken out in the past were conducted, to presume causes of the fire at the indoor shooting range in Busan and suggest fire safety measures. On-site investigations and shooting tests on unburned gunpowder were also carried out. No trace of the muzzle spark and spark at the bullet trap was found in CCTV footage, and the impact of a stray bullet failed to ignite gunpowder. Cigarette was therefore presumed to be the most likely source of ignition among the potential sources. It appeared that the explosion in the shooting area was caused by violent burning of the polyurethane sound absorber and unburned gunpowder accumulated on it. The fire safety measures include prohibit of use of profile polyurethane sound absorber, removal of steel components from bullet trap, clean up and control of unburned gunpowder, etc.

• International Journal of High-Rise Buildings
• /
• v.6 no.4
• /
• pp.297-300
• /
• 2017

Employers are realizing that workplaces have an immense impact on productivity. And, because people typically represent about 90% of a company's costs, even a slight improvement in productivity hits the bottom-line in a very big way. The focus is shifting away from saving money by reducing space needs or cutting energy requirements, and moving toward making the workplace friendlier and healthier. What is a healthy workplace, exactly? The answer should be clear by now. Mountains of research have expounded on this very topic, and then news outlets cover the latest discoveres ad infinitum. The problem is, research is rather dense, while the news isn't comprehensive. Office managers trying to improve workplace wellness want neither a 55-page report nor a half dozen articles to convince their landlord that their space can do better. Recognizing this gap, Harvard researchers have released a concise-yet-complete list of healthy building features. Here, we're sharing these nine features with a few insights of our own on the value of being healthy and productive. Find out: ${\bullet}$ What makes a healthy building and why is it so important ${\bullet}$ How to improve the health of your own office ${\bullet}$ What happens for your people and your bottom line when you make health a priority.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1093-1098
• /
• 2013

A single-crystal sapphire is used as a transparent bulletproof window material; however, few studies have investigated the dynamic behavior and fracture properties under high-speed impact. High-speed and high-resolution sequential images are required to study the interaction of the bullet with the brittle ceramic materials. In this study, a device is developed to capture the sequence of high-speed impact/penetration phenomena. This system consists of a speed measurement device, a microprocessor-based camera controller, and multiple CCD cameras. By using a linear array sensor, the speed-measuring device can measure a small (diameter: up to 1 2 mm) and fast (speed: up to Mach 3) bullet. Once a bullet is launched, it passes through the speed measurement device where its time and speed is recorded, and then, the camera controller computes the exact time of arrival to the target during flight. Then, it sends the trigger signal to the cameras and flashes with a specific delay to capture the impact images sequentially. It is almost impossible to capture high-speed images without the estimation of the time of arrival. We were able to capture high-speed images using the new system with precise accuracy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.405-413
• /
• 2013

During the land operations, the enemy's gunnery is the primary threat. For the military vehicle, the bulletproof effect is the one of the important issues regarding the safety of soldiers on duty. Recently, the advanced military vehicles have planned to install armor plates. However, due to the budget problem, it is difficult to equip the protection systems. Hence, the optimum approach to increase bulletproof capability is essential. In this paper, the optimum thickness and component of the armor of military vehicles were evaluated by using finite element analysis for bullet impact effects. To achieve this aim, 7.62mm NATO bullet, 1.6mm steel and Kevlar-29 composite have been modeled and the simulations were conducted with various thickness cases by using MSC Nastran sol 700. Consequently, it was revealed that Kevlar-29 45 Layer is appropriate thickness for 7.62 bulletproof. Furthermore, Kevlar-29 in front of steel was effective by comparison with the back of steel for bulletproof.

• Composites Research
• /
• v.24 no.6
• /
• pp.7-11
• /
• 2011

Polyurethane oligomers (PUOs) such as UA8297, UP127 and EB8200 were utilized to enhance the anti-bullet property of Dyneema$^{(R)}$/vinylester composites. First, prepregs of PUO and vinylester (XSR10) were prepared via spray coating on Dyneema$^{(R)}$ fabric at 21 % resin content (by volume). In addition, spray coating and film lamination were also carried out with a mixture of XSR10/PUO for selected PUOs. Next, the prepregs were dried at RT for 1-2 h and then at $100^{\circ}C$ for 30 min to remove the solvent and to provide partial cure when necessary. The prepregs were stacked in 24 layers and cured at $120^{\circ}C$ for 5 min under the contact pressure and for additional 25 min at 150 $kg/cm^2$. Finally, the anti-bullet properties of composite samples were evaluated by measuring $V_{50}$ with simulated fragment projectile (SFP, 17 gr). The results showed a 6.5 and 9.0 % increase of $V_{50}$ with UP127 and EB8200, respectively.