• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.356-363
• /
• 2019

A patient who went through maxillectomy can have soft palate defects including oronasal fistulas and suffer from dysphagia and dysarthria due to velopharyngeal insufficiency. This defect causes the food to enter nasal cavity and creates hypernasal sound which debilitates a quality of life. An obturator can rehabilitate the substantial oral tissue defects. The maxillary obturator separates the nasopharynx from the oropharynx during speech and deglutition by closing of the defect. For edentulous obturator patient, it is difficult to obtain proper retention due to reduced peripheral sealing. Therefore, the contours of the defects must be used to maximize the retention, stability, and support. Hollow type obturator can improve physiologic function by reducing weight than the traditional obturator. This case report describes a patient with hemi-maxillectomy who recovers mastication, speech, deglutition, and appearance with a maxillary obturator using physiological border molding of the velopharyngeal area and double-processing method.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.28 no.1
• /
• pp.29-45
• /
• 2015

Objectives: The object of this study was to observe the in vitro antibacterial effects of Yeonkyokeumpae-jeon (YKKPJ) have been used for treating various gynecological diseases including mastitis in Korea, and individual six kinds of herbal composition aqueous extracts - Forsythiae Fructus (FF), Millettiae Caulis (MC), Lonicerae Flos (LF), Fritillaria Thunbergii Bulb (FT), Taraxci Herba (TH) and Prunellae Spica (PS) against E. coli. Methods: Antibacterial activities against E. coli of YKKPJ, FF, MC, LF, FT, TH and PS aqueous extracts were detected using standard agar microdilution methods. In addition, the effects on the bacterial growth curve were also monitored at MIC and $MIC{\times}2$ levels. The effects on the intracellular killing and bacterial invasion of individual test materials were also observed using Raw 264.7 and MCF-7. The results were compared with ciprofloxacin, a second generation of quinolone antibiotics in the present study. Results: MIC of YKKPJ, FF, MC, LF, FT, TH, PS aqueous extracts against E. coli were detected as $0.039{\pm}0.013mg/ml$, $0.064{\pm}0.033mg/ml$, $0.108{\pm}0.053mg/ml$, $0.078{\pm}0.027mg/ml$, $16.250{\pm}8.385mg/ml$, $15.625{\pm}9.375mg/ml$, $0.254{\pm}0.131mg/ml$, repectively. YKKPJ, FF, MC, LF, FT, TH, PS aqueous extracts showed antibacterial effects against to E. coli, except for FT and TH, which were showed negligible antibacterial effects, respectively. In addition, ciprofloxacin with YKKPJ, FF, MC, LF and PS aqueous extracts also showed marked dosage-dependent inhibition of bacterial growth, and favorable inhibitory effects on the both bacterial invasion and intracellular killing assays using MCF-7 and Raw 264.7 cells were detected in this experiment. Conclusions: The results obtained in this study suggest that traditional polyherbal formula YKKPJ aqueous extracts showed more favorable antibacterial activities as compared to individual six kinds of herbal composition aqueous extracts. The antibacterial effects of YKKPJ against E. coli considered as results of complicated synergic effects of their six kinds of herbal components rather than simple antibacterial effects of single herbal components. It means, YKKPJ aqueous extracts may show potent anti-infectious effects against E. coil for mastitis.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.654-658
• /
• 2010

A FA (Lilium formolongi $\times$ Lilium asiatic hybrid) intersectional hybrid lily cultivar 'Orange Crown' was developed in 2007 at National Institute of Horticultural and Herbal Science (NIHHS), Rural Development Administration (RDA) of Korea. The cross and immature embryo rescue was conducted between female parents 'Migreen' (Lilium formolongi 'Raizan' $\times$ Lilium asiatic hybrid 'A61') and male parent 'A01-187' (L. asiatic 'A96-28' $\times$ 'Sanzio') by cut style pollination method at Suwon in 2001. It was preliminarily selected as 'FA04-27' in 2004. Multiplication, bulb production and characteristic tests were conducted from 2004 to 2007. The evaluation of characteristics and preference were surveyed at a lily flower show of NIHHS at Taean in 2007. 'Orange Crown' flowers in the late of June and grows more than 183 cm stem length. Flowers bloom upward-facing, a little spotted and orange (RHS, O24A) petals. The pollen of 'Orange Crown' was sterile.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.325-329
• /
• 2018

There are two kinds of calla belonging to the Zantedeschia spp. depending on the growing condition. Between them, various colored calla with flower shape and flower color are very popular as cut flowers. However, colored calla is very low in natural reproduction rate, and it takes a long time to obtain a flowering bulb. So it is urgent to establish a large breeding system of good varieties. In this study, various plant growth hormone treatments were carried out to improve the growth of the plants in calla. Root formation was the highest at 81.5 % in basal MS medium, and the formation of shoot and multiple shoots were the highest at 100.0 % and 36.4 % in the combined treatment of BA 2.0 mg/L and IBA 1.0 mg/L, respectively. In fresh weight, the highest growth rate was observed with 11.2 times increase in BA 2.0 mg/L single treatment. Auxin and cytokinin mixed treatment were widely used in previous studies and positive effects on the growth of calla plants will help to establish the micro-propagation system.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.301-307
• /
• 2011

Optimal culture conditions of Spirulina platensis NIES 39 have been established using different types of light sources. Several types of photobioreactors were designed and the increase of biomass, the amount of $CO_2$, fixation and the production of chlorophyll content were studied. The result revealed that the input conditions of a 10 min period per 4 h at the condition of 5% $CO_2$ and 0.1 vvm, were excellent in the growth. The growth showing the maximum biomass accumulation is limited to 1.411 g/L when using the fluorescent bulb and the low powered surface mount device (SMD) type LEDs which were equipped-inside in the photobioreactor. However, the biomass exceeded up to 1.758 g/L level when a high powered red LED (color temperature : 12000 K) photobioreactor system was used. The $CO_2$ fixation speed and rate were increased. Although the total production of chlorophyll content undergoes a proportional increase in the biomass, the net content per dry cell weight (DCW) showed the higher production with a blue LED (color temperature : 7500 K) light than that of any other wavelengths. The carbon dioxide loss was marked as 0.15% of the inlet gas (5% $CO_2/Air$, v/v) at the maximum biomass culture condition.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.216-220
• /
• 2018

Freesia (Freesia hybrida Hort.) 'Sweet Lemon' was developed for the cut flowers in National Institute of Horticultural Herbal Science, Rural Development Administration, Korea in 2015. This hybrid was crossed and selected from 'Teresa' and 'Yvonne' in 2007. Morphological characteristics of the selected freesia hybrid were investigated for 5 years from 2009 to 2014, and then it was named 'Sweet Lemon' in 2015. 'Sweet Lemon' has double and lemon petals (RHS color chart Y2B). The average flower diameter was 6.8 cm and the average yield is 6.7. The growth of the plant is vigorous and the average plant height is 99.0cm, which is 34.7cm higher than the standard cultivar 'Yvonne'. The average floret number per stalk of 'Sweet Lemon' was 10.7, and stalk length was 7.7 cm. The average days to first flowering of 'Sweet Lemon', 126 days, was approximately 20 days earlier than the control cultivar. It's average vase life and yield is 8.7 days and 5.6 cormlets per plant, respectively. Totally 58 of volatile compounds were identified using gas chromatography-mass spectrometry (GC-MS), the major components were linalool, alpha-terpineol, alpha-selinene, and limonene.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2021

Onions are a representative produce that requires supply-demand control measures due to large fluctuations in production and price by growing season. Accurate forecasts of crop production can improve the effectiveness of such measures. However, it is challenging to obtain accurate estimates of crop productivity for onions because they are mainly grown on the open fields. The objective of this study was to perform the empirical analysis of the relationship between factors for crop growth and meteorological conditions, which can support the development of models to predict crop growth and production. The growth survey data were collected from open fields. The survey data included the weight of above ground organs as well as that of the bulbs. The estimates of meteorological data were also compiled for the given fields. Correlation analysis between these factors was performed. The random forest was also used to compare the importance of the meteorological factors by the growth stage. Our results indicated that insolation in early March had a positive effect on the growth of the above-ground. There was a negative correlation between precipitation and the growth of the above-ground at the end of March although it has been suggested that drought can deter the growth of onion. The negative effects of precipitation and daylight hours on the growth of the above-ground and under-ground were significant during the harvest period. These meteorological factors identified by growth stage can be used to develop models for onion growth and production forecast.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.5
• /
• pp.179-186
• /
• 2021

Manipulation of complex objects with an anthropomorphic robot hand like a human hand is a challenge in the human-centric environment. In order to train the anthropomorphic robot hand which has a high degree of freedom (DoF), human demonstration augmented deep reinforcement learning policy optimization methods have been proposed. In this work, we first demonstrate augmentation of human demonstration in deep reinforcement learning (DRL) is effective for object manipulation by comparing the performance of the augmentation-free Natural Policy Gradient (NPG) and Demonstration Augmented NPG (DA-NPG). Then three DRL policy optimization methods, namely NPG, Trust Region Policy Optimization (TRPO), and Proximal Policy Optimization (PPO), have been evaluated with DA (i.e., DA-NPG, DA-TRPO, and DA-PPO) and without DA by manipulating six objects such as apple, banana, bottle, light bulb, camera, and hammer. The results show that DA-NPG achieved the average success rate of 99.33% whereas NPG only achieved 60%. In addition, DA-NPG succeeded grasping all six objects while DA-TRPO and DA-PPO failed to grasp some objects and showed unstable performances.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.2
• /
• pp.19-30
• /
• 2023

Underground structures, such as compacted sand piles applied as soft ground countermeasures, are analyzed for settlement and stability by the composite ground design method. The basic principle of the composite ground design method is the arching effect. The reinforcing effect of the pile is evaluated as the stress-distribution ratio. When applying grouting piles with elastic properties using the ground reinforcement method, the existing stress-distribution ratio was only considered when the pile was installed. This study shows that the method of applying the stress-distribution ratio applied in previous studies should be changed when the ground reinforcement pile is installed at an arbitrary location in the ground without raising it to the ground surface. When high strength jet routing is applied, the stress-distribution ratio (n) to the in-situ ground generally ranges from 30 to 50. However, if the pile is located far from the surface and the depth goes down to the boundary depth of the stress sphere, the stress-distribution effect rapidly decreases, and the stress-distribution ratio converges to 1.5.

• Journal of Environmental Impact Assessment
• /
• v.33 no.1
• /
• pp.9-17
• /
• 2024

The purpose of this study is to select and predict optimal heatwave indices for describing and predicting heat-related illnesses. Regression analysis was conducted using Heat-related illness surveillance system data for a number of heat-related illnesses and meteorological data from the Korea Meteorological Administration's Automatic Weather Station (AWS) for the period from 2021 to 2023. Daily average temperature, daily maximum temperature, daily average Wet Bulb Globe Temperature (WBGT), and daily maximum WBGT values were calculated and analyzed. The results indicated that among the four indicators, the daily maximum WBGT showed the highest suitability with an R² value of 0.81 and RMSE of 0.98, with a threshold of 29.94 Celsius. During the entire analysis period, there were a total of 91 days exceeding this threshold, resulting in 339 cases of heat-related illnesses. Predictions of heat-related illness cases from 2021 to 2023 using the regression equation for daily maximum WBGT showed an accuracy with less than 10 cases of error annually, demonstrating a high level of precision. Through continuous research and refinement of data and analysis methods, it is anticipated that this approach could contribute to predicting and mitigating the impact of heatwaves.