• Corrosion Science and Technology
• /
• v.10 no.6
• /
• pp.194-198
• /
• 2011

This is the first release of an interim report on the development of coating technology of Zn-Mg alloy layers on steel strip by EML-PVD (electromagnetic levitation - physical vapor deposition) process in an air-to-air type continuous PVD pilot plant. It intends to introduce a basic principle of the EML-PVD process together with the high speed PVD pilot plant built in Posco. Due to the agitation effect provided by the high frequency induction coil, simultaneous evaporation of Zn and Mg from a droplet could produce alloy coating layers with Mg content of 6% to 12% depending on the composition of the droplet inside the coil. For its superior corrosion resistance, Zn-Mg alloy coated steel would be a very promising material for automotive, electrical appliances, and construction applications.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.12-24
• /
• 2013

The cities of Joseon dynasty had weak structure against fire. Fires have resulted in damage on property and life. But they gave a chance to development various policies, planning tools, techniques and facilities for minimizing the damages of fire. This study aims to understand the progression of fire control policy in Joseon dynasty. Fire control policies can be divided into four categories ; fire prevention, prohibition of fire spreading, fire extinguishing and rescue system. The progression of fire control policies can be divided into three steps. In the first step, from Taejong to Moonjong, various policy, such as regal & administrative system, planning tools, fire control works & appliances have been built and executed. In the second step, from Danjong to Hyunjong, fire control work have taken the central place of fire control policy. In the third step, from Sookjong to Sunjong, development of fire control appliances have taken the central place of fire control policy.

• Current Photovoltaic Research
• /
• v.1 no.1
• /
• pp.33-37
• /
• 2013

LCPV modules under 5 suns consist of reflective optics and receiver modules, similar to a typical fixed concentration PV module. If they are to be used as a compound parabolic concentrator, which is filled with a dielectric material, a compact plate structure of the fixed CPV can be designed and built at a large acceptance angle. These types of flat-$plate{\mu}$-LCPV modules are suitable for building integrated photovoltaic modules, facade applications, mobile devices, and small home appliances. Therefore, in this study, the possibilities for other application devices were studied and presented by designing and fabricating LCPCs for CPV modules.

• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.11-18
• /
• 2010

The aims of this study were to grasp the real condition state and clarify the characteristics and influence of pollutants on the indoor air pollution in occupied apartment units. The research method was to measure the pollution levels of indoor air pollution, and investigate characteristics of the pollutants such as the outdoor environment, elapsed time after construction, finished materials, temperature, relative humidity, space extension, purchase with furniture and electric appliances, built-in closets, and method for cleaning the air. And these were made a comparition between industrial and residential area. The VOCs and formaldehyde concentration in indoor air were measured the 6 household in residental area and 5 household in industrial area. In conclusion, the concentration such as benzene, ethylbenzene, toluene, xylene, styrene showed the pollution state within permissible levels, however formaldehyde concentration has need a lot of attention as ever. And it turned out that the influence with reference to emission from building materials on indoor air pollution lessened under 18 months elapsed time after construction.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.99-100
• /
• 2006

The concept of dental clinic have been changed along the advanced dental science to meet the need of setting up high-technology-digital appliances. As the general idea about the dental clinic has been changed from systematic connection, the expansion of zoning needs to become more accurate and mote detailed. In the spacious waiting room. the interment cafe has been established to supply the information services, and the various multi-imaged channels, which were built in, will relieve the boredom of the waiting time. The formation of water space leads to the effect of humidification and makes parents share visual and auditory sympathy All of the unit-chairs attached cameras in the consultation room enables people to diagnose more quickly and precisely through the computerized system. Partitions have been set of to put it in and to help diagnosis process to be done smoothly in the formational space. The whole atmosphere is intended to be harmony with the natural surroundings in Je-Ju. It will inspire people visiting this clinic to image the deep blue sea in Je-Ju. By using projective non-material a lot, especially material wooden windows and doors, it is believed to create the bright and stable atmosphere. It will lead patients feel comfortable.

• Journal of Families and Better Life
• /
• v.26 no.6
• /
• pp.51-69
• /
• 2008

The purpose of this study was to identify the level of awareness, uses, and satisfaction on home automation systems by the digital home residents, to reveal the existing problems using home automation systems, and to clarify residents' positive or negative life changes after using home automation systems. Two apartment complexes, which were relatively well equipped with home automation systems compared to other recently built apartments, were selected to perform the survey by digital home residents who were housewives and have lived in current home more than 6 months. The researcher developed a survey questionnaire for each apartment complex and collected data from 501 residents from May to June, 2008. The results of the study found low awareness and low uses of remote control systems of electric appliances through a cellular phone or PC from outside. Also, the significant variables which showed group differences in level of uses and satisfation were age, annual income, duration of residence, and level of considering home automation system before decision to move in. The results of the study also revealed that frequent breakdown was the most critical problem using home automation systems. Generally, using home automation systems affected to residents' life changes positively. More findings and suggestions for development of more user-friendly digital home services were discussed.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.257-263
• /
• 2015

Although a variety of preparation methods for DoS attacks and DDoS attacks are presented, it is still being exploited, the vulnerability with networks and protocols. In particular, When was built environment that can be used anywhere in the Internet, Internet of Things is entering era. Thus, the conventional computer, as well as household appliances, etc. DoS attack targets or are likely to do the attacker role is increasing. In this paper, we first find out about the type and characteristics of DoS attacks. Open source operating system, Linux has iptables that packet filtering tool and firewall programs. Using iptables to set the policy ruleset against DoS attacks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.68-73
• /
• 2011

In this study, a group of home bus system(HBS) is used to manage difference types of household appliances or many household appliance of the same type. The existing central controller is analyzed, and an independent control system is built to devise new methods to design the PC HBS. The newly designed system is installed in an air-conditioned building; the system can be monitored and controlled from a control room or from an office. By using the system, we can efficiently manage future energy needs and control large-scale integrated electronics and home automation system to an individual manage to build large is expected to contribute.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.3
• /
• pp.213-221
• /
• 2004

In recent years, since more and more diode rectifiers with smoothing dc capacitor are used in electronic equipments, household appliances and ac drives, harmonics generated by these loads have become a major issue. In addition, 3-phase 4-wire system is widely employed in distributing electric energy to several office building and manufacturing plants. This systems show excessive currents in the neutral. These neutral currents are fundamentally third harmonic, and their presence is tied to wiring failure, elevating of neutral potentials, transformer overheating, etc. In response to the concerns, this paper proposes a series active power filter scheme based on direct compensating voltage extraction method and the advantage of this control algorithm is direct extraction of compensation voltage reference without multiplying gain. Therefore, the calculation of the compensation voltage reference will becom much simpler than other control algorithm. To verify the effectiveness of the proposed algorithm, a prototype active power filter is built and some experiments are carried out.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.1
• /
• pp.60-69
• /
• 2016

Complicated crown-root fracture of permanent incisors cause esthetic, functional, and psychological problems to patients. Therefore, treatment is important and multidisciplinary treatment is required. This case report describes the clinical procedures involved in the treatment of trauma-induced complicated crown-root fractures in the maxillary incisor of two young patients. Conventional root canal treatment and apexification were performed in each patient. To expose the fracture margins to the supragingival level and to reestablish the biologic width, orthodontic extrusions with fixed appliances were performed followed by a retention period. During the retention period, fiber-optic posts and cores were built up and provisional crowns were placed. Finally, ceramic crowns manufactured using a computer-aided design/computer-aided manufacturing (CAD/CAM) system were placed. In both patients, the teeth presented satisfactory functional and esthetic outcomes without relapse. The periodontal tissues were healthy.