• Journal of the Korean Institute of Navigation
• /
• v.8 no.2
• /
• pp.51-70
• /
• 1984

In the North Pacific Ocean a lot of large waves set up in winter, affected by continued winds and swells owing to severe extratropical cyclones. Under this sea condition, if the ship is about 100,000L/T (in deadweight capacity tonnage), we can't find the danger involved in the ship at sea apparently. But when we compare the seaworthiness of ship's building strength with the stress given to the hull by waves, we can't insist that the former be more stronger than the latter. As a result, VLCC is in danger of destroying and cutting for lack of longitudinal strength in heavy weather. Up to this time, Naval Architects have actively studied the relation between ship's longitudinal strength and waves as a ship's projector; however, actually, they have never made more profound study on the problem of longitudinal strength in relation to navigation. The main puprpose of this thesis is to clarify these vivid actual states of ship's trouble unknown to ship's masters. In this thesis we picked up VLCC Pan Yard, a vessel of Pan Ocean Bulk Carrier company's, as a model ship. And in the North Pacific Ocean, we have chosen for this research the basins where the wind speed and the wave height are greater than average. The data used this thesis are quotes from the "winds and waves of the North Pacific Ocean('64-'73)", and wind speed more than 30 knots was made use of as an ocject of this study. By usinh the ITTC wave spectrum, we found out the significant waves for every 5 knots within the range of 20 knots to 45 knots of wind speed. According to this H1/1000 was calculated. The stress of ship's hull is determined by ship's speed and wave height. We compared the ship's longitudinal strength with a planned wave height by rules of several famous classification societies in the world. In the last analysis, we found out that ship's present planned strength in heavy weather is not enough. Finally we made a graph for avoiding heavy weather, with which we studied safe ship's handling in the North pacafic Ocean in winter.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.105-112
• /
• 2013

The new renewable energy became popular as a clean and sustainable alternative energy under the circumstances that the entire world is facing severe abnormal climate due to the use of fossil fuel, and among which, solar energy can be obtained anywhere and is not difficult to apply it into the existing buildings, which makes it possible to be widely distributed. However, as PV module is installed into a single plate system, it shows structural weaknesses which are vulnerable to wind load and give loss to design elements in external appearance. Accordingly, this study planned one-step parallel system to complement the problems occurring from a single plate system and used STAR-CCM+ V.8 made by CD-Adapco, a computational fluid dynamics(CFD) simulation tool to measure wind load stability and support based on the design standards for a single plate system and one-step parallel system. Building height was limited to less than 10m and wind speed was given when increasing from 35m/s to 50m/s by 5m/s on PV system installed into the flat roof. In this case, our analysis suggested that step-one parallel system was in class 7-9 according to Beaufort's wind power classification, which did not have an impact on the fixed PV system, and the single plate system is considered to cause risks in designing wind speed in central districts because it is more than wind power class 12.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.289-294
• /
• 2020

Peptic ulcer disease is a gastrointestinal disorder caused by Helicobacter pylori infection and the use of nonsteroid anti-inflammatory drugs. While many studies have been conducted to find the risk factors of peptic ulcers, there are no studies on the suggestion of peptic ulcer prediction models for Koreans. Therefore, the purpose of this study is to implement peptic ulcer prediction model using machine learning based on demographic information, obesity information, blood information, and nutritional information for middle-aged and elderly people. For model building, wrapper-based variable selection method and naive Bayes algorithm were used. The classification accuracy of the female prediction model was the area under the receiver operating characteristics curve (AUC) of 0.712, and males showed an AUC of 0.674, which is lower than that of females. These results can be used for prediction and prevention of peptic ulcers in the middle and elderly people.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.321-328
• /
• 2014

Clear understanding and related information management of geography and city facilities are the fundamental approach to prevent city disaster. In order to accomplish the service to prevent city disaster effectively, there needs to be a consistent framework for data collection, to build models, and to manage information. In this study, the authors proposed standardized city information modeling process and application concept to use information model for service of preventing city disaster in information management standpoint. The study was conducted on the process of classification and necessary attributes to manage city facilities effectively considering disaster related information. Additionally, the study suggested the methods for building an open city information model based on an integrated data schema, CityGML. Finally, through the implementation of sample model, the study confirmed city information modeling methodology and applicability for service of disaster prevention.

• Journal of architectural history
• /
• v.32 no.1
• /
• pp.61-72
• /
• 2023

Korean architecture classifies Banja (the decorated flat of the ceiling visible from the inside) of Royal Palaces into two types: Woomul(water-well, 井) banja, which inserts rectangular wooden board into lattice frame, and paper banja, which applies paper to the flat ceiling. Such classification was established in the 19th century. Before that, Banja was classified according to what was inserted into the lattice frame, either wooden or paper board. At first, the banja that used paper board was widely installed regardless of the purpose or nobility of the building. However, since the 17th century, the use of paper board banja became mostly restricted to Ondol (Korean floor heating system) rooms which are characterized by private usage and the importance of heating, and it was considered inferior to wooden board banja in terms of rank or grace. The contemporary paper banja was mainly installed in low-rank ondol rooms until the late 19th century to early 20th century, when roll-type wallpaper was introduced from the West and the paper banja came to decorate the King's and Queen's bedrooms. The traditional paper board banja benefits heat reservation, reduces the weight of the ceiling, and allows the adjustment of the lattice frame size. Furthermore, it can feature unique artistry if covered with blue, white, or red Neung-hwa-ji (traditional flower pattered paper).

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.100-107
• /
• 2001

A Interior material, a main cause of fire-growth and generating toxic gas when it burns, should be dealt with great care in life safety design. Nonetheless, it has been used recklessly with undue attention to its contribution to fire in particular in entertainment occupancy and causes many victims in fire. Therefore, this study attempts to examine the current use of interior material in Korea and find out what to be improved and enhanced in terms of related regulations. Based on the comparison and analysis of the Korea regulation with those of advanced nations, suggestions are made for an effective and efficient improvement and complement to the current system. What can be suggested from this study are as follows. The use of interior material should be controlled under the unified regulation of fire-safety codes. Code should be set up so that the current construction enforcement should be applied in retroactive to those entertainment buildings that obtained a license prior to the implementation of the system certifying that the building is fire-resistant and fire-protective. The legislation should be made to control the fire-protection facilities of small-sized, underground entertainments. It should be obliged to present the blueprint displaying the use of interior material at the time of changing occupancy. Or, it should be compelled to report changes that go way without permit to the administrative office. A compulsory provision should be set up to have a fire-resistant performance to movable furniture. The classification index designating the fire hazard of interior material by flame spread rate and smoke toxicity and its test method should be established.

• Journal of The Korean Association For Science Education
• /
• v.38 no.4
• /
• pp.575-585
• /
• 2018

In this study, the texts of science textbooks of the past 20 years were collected in order to systematically carry out researches on scientific languages and scientific terms that have not been noticed in science education. We have collected all the science textbooks from elementary school to high school in the 6th curriculum, the 7th curriculum, and the 2009 revised curriculum, and constructed a corpus comprising of 132 textbooks in total. Sequentially, a raw corpus, a morphological annotated corpus, and a semantic annotated corpus of science terms, were constructed. The final constructed science textbook corpus was named K-STeC (Korean Science Textbook Corpus). K-STeC is a semantic annotated corpus with semantic classification and classification of scientific terms, together with meta information of bibliographic information such as curriculum, subject, grade, and publisher, location information such as chapter, section, lesson, page, and sentence, and structure information such as main, inquiry activities, reference materials, and titles. Throughout the three-year study period, a new research method was created by integrating the know-how of the three fields of linguistic informatics, computer science and science education, and a large number of experts were put in to produce labor-intensive results. This paper introduces new research methodologies and outcomes by looking at the whole research process and methods, and discusses the possibility of future development of scientific language research and how to use the results.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.6
• /
• pp.602-608
• /
• 2013

The aim of this study is to investigate experimentally the effect of the combination of fine particle cement with high Blaine fineness (FC) and recycled aggregates on the engineering properties and micro structure of high volume blast furnace slag (BS) concrete with 75% BS and 21 MPa. FC manufactured by particle classification at the plant with Blaine fineness of more than $7000cm^2/g$ was used as additional alkali activator for high volume blast furnace slag concrete made with recycled fine and coarse aggregates. FC was replaced by 15, 20 and 25% OPC. Test results showed that the incorporation of FC resulted in an increase in the compressive strength compared to BS concrete without FC by as much as 30% due to accelerated hydration and associated latent hydraulic reaction. It was found that the use of FC and recycled aggregates played an important role in activating BS for high volume BS concrete by offering sufficient alkali.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.2
• /
• pp.13-24
• /
• 2020

This study derives the characteristics of the private external space planning in multi-family housing through the analysis of the good case built after 2000 in Europe. First, the cases were categorized into block or block perimeter, linear and point type to examine the relationship between the type of building in urban context and the location of private external space. By block or block perimeter and linear type, private external spaces are planned in the inner courtyards or open space between buildings used as common space for residents, inducing communications between neighbors. And the direction of private external space depends on the arrangement of the building mass in urban context. In the classification as point type, there are many cases, where private external spaces are arranged in all directions, connected almost all interior spaces. Second, based on the above results, the planned characteristics of the private external space are derived by dividing it into three categories: intermediated space between inside and outside, intermediate space between private and public /individual and collective space and the identity of the intermediate space. (1) In most cases, direction, size of enclosed area and location of private extern space is designed to fit the surrounding context, so residents can perceive as much of the assets of the surrounding environment as possible, and it can be used as an extended area of living space. In another cases, it is divided into various sub-areas to experience the spatial transition from inside to outside or vice versa. 2) The private external space, which is placed in a courtyard or in a collective open space, is partially enclosed and blocked, allowing interaction with the neighbors without pressure. Along the street, they are designed to allow residents to experience the vitality of the city and to be formative element of the facade, which could confidently reveal the lifestyle and taste of residents. 3) By some of point types, which facade is three-demensional layer as a habitable external space, the private external space is very flexible for use. This intermediate space is composed of diverse spaces for various needs, or it has generous size with positional conditions connected with all interior spaces to be used multi-functional.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.701-712
• /
• 2021

As the domestic housing supply problem has been resolved, the apartment construction market has shifted to a consumer-oriented market that wants high quality, and in particular, expectations in the area of finishing quality have increased. Looking at the status of complaints regarding apartment housing defects supplied by Korea Land and Housing Corporation, tile-related complaints are the type occurring the most frequently. While the Ministry of Land, Infrastructure and Transport(MOLIT) is making an ongoing effort to reduce complaints related to defects, through approaches such as drafting amendments to 「Investigation of defects in apartment houses, calculation of repair costs, and standards for determining defects」, the provision of preventive measures has been insufficient. In addition, by reviewing studies, there has been insufficient research to construct a classification system after deriving the characteristics of each type using the qualitative knowledge of experts, various quantitative indicators, and suggesting measures for reduction according to the causes of each type. Therefore, this study will reflect qualitative indicators to use the AHP analysis that makes it easy to identify the relationship between defects by surveying construction experts. Then, by visualizing the weight of 'Possibility of recurrence after repair,' 'Degree of difficulty in repairing defects' and 'Fault frequency' using a radial graph, we will analyze the characteristics of each type of tile construction defect and establish measures for reduction according to the cause. This will improve the quality of the living environment and contribute to the establishment of a system for smooth defect management and reduction of defects in apartment tile construction.