• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.273-280
• /
• 2000

Channel characteristics between the outdoor transmitter far away from the building and receivers inside the building are explored theoretically using ray tracing technique. In this paper, 29 receivers are located on the single floor of the building to observe the variation of channel properties depending on receiver location. For each receiver, amplitudes and phases of ail the possible rays form the transmitter to the receiver are traced to obtain impulse response. Statistical results for rms delay spread and power delay profiles for representative receiver location are given.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.19-20
• /
• 2016

Domestic construction industry has experienced many difficulties as it has been on a downward. It's a way that active modular structure market to solve this problem. However, as Modular structure technical standard in Korea is in the early stages, our modular factory maufactured rate is almost 40% lower than overseas. Besides, there is less design diversity so it just applies for a few buildings like low-rise building and general group barrackes. To deal with these problems, it is essential to modulating the equipment which can improve the production rate. This will help to ensure the quality, shortening of the construction period, the reduction of labor costs. We have defined the name of segmented by each installation location of the equipment to modulating equipment. And it was examined the suitability of the modulating of the location-specific utility system. The results of the analysis are discussed on the page.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.258-259
• /
• 2013

Recently, architectural design has been changing from formal design to freeform design due to the digitalization of construction industry. Especially, the formal design has been accepted as a design trend recently and applied many times as a design concept in the architectural design competitions such as turn-key. However, various deflects such as water leak and cracks have been occurred because the traditional construction methods had been applied without any revision or adaptation of the formal construction method for the freeform building construction. Therefore this research proposes location point control method for freeform metal panel installation which is focused on the application of LH JinJu new office.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.2
• /
• pp.3-10
• /
• 2018

Damage location and extent of structure could be detected by the inverse analysis on dynamic response properties such as frequencies and mode shapes. In practice the measured difference of natural frequencies represent the stiffness change reliably, however the measured mode shape is insensitive for stiffness change, but provides spatial information of damage. The damage detection index on shear building structures is formulated in this study. The damage detection index could be estimated from mode shape and srory stiffness of undamaged structure and frequency difference between undamaged and damaged structure. For the verification of the observed damage detection method, the numerical analysis of Matlab and MIDAS and shacking table test were performed. In results, the damage index of damaged story was estimated so higher than undamaged stories that indicates the damaged story apparently.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.29-30
• /
• 2022

Tile defects in apartment houses are caused by a combination of various factors. These factors cannot be specified, and it is difficult to determine the exact cause because a number of causes are intertwined. In addition, because the climate of Korea is different by season, the coefficient of thermal expansion between materials is different, which is a major cause of tile defects. Therefore, this study analyzed the difference between the construction location and the period of defect occurrence according to the types of tile defects caused by environmental differences between indoor and outdoor environments. Two-way ANOVA was used, indoor and outdoor spaces were selected, and defect types were selected accordingly to show the difference in the occurrence period of each defect.

• Journal of Digital Contents Society
• /
• v.19 no.8
• /
• pp.1617-1623
• /
• 2018

It is necessary to develop a next generation location referencing method with higher accuracy as advanced technologies such as autonomous vehicles require higher accuracy of location data. Thus, we proposed a framework for a lane-level location referencing method (L-LRM) based on high-precision digital road network map, and developed a tool which is capable of analyzing and evaluating the proposed method. Firstly, the necessity and definition of location referencing method was presented, followed by the proposal of an L-LRM framework with a fundamental structure of high-precision digital road network map for the method. Secondly, an architecture of the analysis and evaluation tool was described and then the Windows application program was developed using C/C++ programming language. Finally, we demonstrated the performance of the proposed framework and the application program using two different high precision digital maps with randomly generated road event data.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.75-86
• /
• 2018

This study analyzed the relationship between re-applications and the degree of re-applications under the assumption of a complex interaction between the location strategy and the internal capacity of a nursing home. The results of the study are as follows. First, although the relative influence on re-use is greater in hospital internal capacity (${\beta}=0.303$) than in hospital location strategy (${\beta}=0.313$) both factors have a statistically significant effect on the degree of re-use. Second, the importance of location strategy was found to be more important for rehabilitation-enhanced nursing hospitals than for general care (${\beta}=0.43$). It is suggested that detailed preparations should be made based on factors such as location marketability, traffic infrastructure, building sales, and medical concentration. Third, internal hospital capacity did not show any adjustment effects due to hospital type, and it was confirmed that both were important factors for general care and rehabilitation-enhanced hospitals.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.5
• /
• pp.340-352
• /
• 2011

This study was carried out to analyze the change of wind filed and heat island according to the location of the high rise building using micrometeorology numerical model Envi-met3.0. In this study, the real urban planning of Jeonju city was used as input for the location and height of buildings. Modeling was performed for two conditions as input data. Case 1 is that wind direction is SSE and case 2 is W. To analyse the change of wind filed, wind speed results were used. To analyze the change of heat island, temperature results were used. Below the building height, wind speed increased 0.2~2.5 m/s at the inflow area and decreased 0.5~2.0 m/s at the area between the buildings. Above the building height, wind speed decreased 0.1~0.8 m/s near the building complex. On the other hand, wind speed increased 0.2~0.4 m/s in the outside area of the building complex. In the case of temperature, below the building height, temperatures increased $0.01{\sim}0.1^{\circ}C$ in the building complex and leeward area. On the other hand, temperature decreased $0.01{\sim}0.005^{\circ}C$ in the outside area of the building complex. Above the buildings height, temperatures decreased $0.05{\sim}0.2^{\circ}C$ in most of the area.

• Journal of architectural history
• /
• v.29 no.5
• /
• pp.7-16
• /
• 2020

The Municipal Building of Busan was the first western-style building of Korea in 1879. It was also the predecessor of Busan Metropolitan City Hall. On the other hand, the Municipal Building of Busan was a symbolic structure that shows the history of Busan. The Municipal Building of Busan has inherited the construction location and site, including the speciality of Choryangwaegwan, and is a good example of the process of inheriting the authority of the former space through the appropriation of the building. The Municipal Building of Busan was relocated to the edge of the coast in 1934 because a small and dilapidated building failed to function properly. The relocation of the Municipal Building of Busan in 1934 was the origin of changing the coastal space in downtown. As a result, landfill sites along the coast were in the limelight and developed into the downtown area of Busan after Korea's liberation.

• Architectural research
• /
• v.12 no.2
• /
• pp.15-22
• /
• 2010

Our prediction model is based on the development of "Semantic Location Model." It embodies geometrical and topological information which can increase the efficiency in prediction and make it easy to manipulate the prediction model. Data mining is being implemented to extract the inhabitant's location patterns generated day by day. As a result, the self-learning system will be able to semantically predict the inhabitant's location in advance. This context-aware system brings about the key component of the ubiquitous computing environment. First, we explain the semantic location model and data mining methods. Then the location prediction model for the ubiquitous computing system is described in details. Finally, the prototype system is introduced to demonstrate and evaluate our prediction model.