• 제목/요약/키워드: Building block method

검색결과 197건 처리시간 0.025초

지반의 동상력과 구조물의 피해대책 (Frost Heave Force of Ground and Countermeasure for Damage of Structures)

  • 예대호;영목휘지;김영수
    • 한국지반공학회논문집
    • /
    • 제23권5호
    • /
    • pp.43-51
    • /
    • 2007
  • 동결작용은 빌딩, 구조물, 도로, 철도 그리고 공공시설관로에 엄청난 손상을 일으킬 것이다. 자연지반의 동상에 대한 연구는 과거에 많이 수행되었다. 근래에는 사회기반시설 유지의 발전과 함께 각종구조물의 복잡화로 인하여 동상대책에 대한 관심이 집중되고 있다. 본 연구에서는 구조물에 작용하는 자연지반의 동상력을 정량적으로 파악하는 것을 목적으로 하였다. 지표면에 설치한 원형강판에 작용하는 동상력이 현장시험에서 측정되었다. 동결면에서 발생하는 동상력은 동결된 토층을 거쳐 구조물에 전달된다. 또한 다단앵커로 보강된 옹벽이 현장에 설치되고 옹벽에 작용하는 동결선과 동상압 등이 측정되었다. 최종적으로 동결면의 위치와 형상이 수치해석수법을 이용하여 추정되었고 치환 범위를 결정하는 설계수법이 토질정보와 기상정보에 따라 제안되었다.

투수성이 높은 화산쇄설층에서 부력앵커 시공을 위한 단일공 차수공법 (C-RJP Grouting)의 적용성에 관한 연구 (A Applicability Study on Single Grouted Column Method (C-RJP Grouting) for Buoyancy-Resistant Permanent Anchor in Highly Permeable Volcanic Clastic Zones)

  • 정용건;채영수;박병희;김정열
    • 한국지반환경공학회 논문집
    • /
    • 제16권8호
    • /
    • pp.5-12
    • /
    • 2015
  • 연구대상은 건축물에 지하부의 이용 극대화 목적으로 지하부의 부력에 대한 부력 저항용 앵커를 고려하였다. 그러나 투수계수가 크고 지하수 유속이 빠른 화산쇄설층에서 앵커 천공부를 통해 지하수가 급격히 유출되어 앵커체 삽입이 불가능하였다. 또한 억지로 삽입된 앵커공에서는 계속적으로 많은 양의 해수와 시멘트가 유출되었으며, 앵커의 일부는 지반에 정착이 되지 않는 현상이 발견되었다. 이러한 문제를 해결하기 위한 지하수 차단방법으로 초고압 분사교반 공법을 적용하였고, 그중 단일공 차수방법을 채택하여 부력방지앵커를 설치하였다. 본 연구에서는 초고압 분사교반 공법을 이용한 단일공 차수방법을 현장에 적용하고 3회에 걸친 시험시공을 통해 본 시공 시험에 적용할 주입재를 결정하였고 투수시험, 코어채취 표준관입시험 일축압축강도시험을 통하여 차수효과 및 지반개량 정도를 확인하였다. 또한 부력방지앵커의 설치 및 인장시험을 통해 앵커의 안정성을 확보하여 화산쇄설층에서 단일 차수공법의 적용성을 검증하였다.

Thermal Stability Enhanced Ge/graphene Core/shell Nanowires

  • 이재현;최순형;장야무진;김태근;김대원;김민석;황동훈;;황성우;황동목
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.376-376
    • /
    • 2012
  • Semiconductor nanowires (NWs) are future building block for nano-scale devices. Especially, Ge NWs are fascinated material due to the high electrical conductivity with high carrier mobility. It is strong candidate material for post-CMOS technology. However, thermal stability of Ge NWs are poor than conventional semiconductor material such as Si. Especially, when it reduced size as small as nano-scale it will be melted around CMOS process temperature due to the melting point depression. Recently, Graphene have been intensively interested since it has high carrier mobility with single atomic thickness. In addition, it is chemically very stable due to the $sp^2$ hybridization. Graphene films shows good protecting layer for oxidation resistance and corrosion resistance of metal surface using its chemical properties. Recently, we successfully demonstrated CVD growth of monolayer graphene using Ge catalyst. Using our growth method, we synthesized Ge/graphene core/shell (Ge@G) NW and conducted it for highly thermal stability required devices. We confirm the existence of graphene shell and morphology of NWs using SEM, TEM and Raman spectra. SEM and TEM images clearly show very thin graphene shell. We annealed NWs in vacuum at high temperature. Our results indicated that surface melting phenomena of Ge NWs due to the high surface energy from curvature of NWs start around $550^{\circ}C$ which is $270^{\circ}C$ lower than bulk melting point. When we increases annealing temperature, tip of Ge NWs start to make sphere shape in order to reduce its surface energy. On the contrary, Ge@G NWs prevent surface melting of Ge NWs and no Ge spheres generated. Furthermore, we fabricated filed emission devices using pure Ge NWs and Ge@G NWs. Compare with pure Ge NWs, graphene protected Ge NWs show enhancement of reliability. This growth approach serves a thermal stability enhancement of semiconductor NWs.

  • PDF

에폭시 수지 용출물질에서의 내분비계장애물질 Bisphenol-A의 정량과 용출특성 파악 (A Study on the Quantification and Chracterization of Endocrine Disruptor Bisphenoi-A Leaching from Epoxy Resin)

  • 배범한;최명수;임남웅;정재훈
    • 한국물환경학회지
    • /
    • 제16권4호
    • /
    • pp.469-477
    • /
    • 2000
  • Bisphenol-A (BPA), a known endocrine disruptor, is a main building block of epoxy resin which is widely used as a coating agent in residential water storage tanks. Therefore, BPA leaching from the epoxy resin may have adverse effects on human health. The possibility of BPA leaching from three epoxy resins were tested with a modified KS D 8502 method at 20, 50, 75 and $100^{\circ}C$ in deionized water and the specified test water, respectively. BPA leached to the test water was identified using GC-MS and quantified with GC-FID after a sequential extraction and concentration. The results showed that BPA leaching has occurred in all three samples tested. The quantify of BPA leaching from unit area of epoxy resin coating was in the range of $10.677{\sim}273.120{\mu}g/m^2$ for sample A, 29.737~1734.045 for sample B and 52.857~548.778 for sample C depending on the test temperature, respectively. In general, the amount of BPA leaching increased as the water temperature increases. This result implies a higher risk of BPA leaching to drinking water during a hot summer season. In addition, microbial growth, measured by colony forming units, in epoxy coated water tanks was higher than that in a stainless steel tank suggesting that compounds leaching from epoxy resin may support the growth of microorganisms in a residential water holding tank.

  • PDF

Nanowire Reconfigurable Crossbar 구조를 위한 결함 회피형 로직 재할당 방식의 분석과 총 비용에 따른 최적화 방안 (Cost-Driven Optimization of Defect-Avoidant Logic Mapping Strategies for Nanowire Reconfigurable Crossbar Architecture)

  • 이종석;최민수
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제37권5호
    • /
    • pp.257-271
    • /
    • 2010
  • Photolithography 통합 시대의 끝이 빠르게 다가옴에 따라, 최근에는 새로운 나노 스케일의 소재와 집적 방식에 기반을 둔 수많은 나노 스케일 장치와 시스템이 나타나고 있다. 특히 nanowire crossbar 구조를 이용한 다양한 reconfigurable architecture 들이 보고되고 있다. 하지만 아쉽게도 나노 스케일의 구성 요소를 이용한 이러한 고집적 시스템은 생산 단계에서 발생하는 각종 물리적 결함과 오차에 취약하며 따라서 결함에 대한 관용성 즉 defecttolerance는 nanowire reconfigurable crossbar 시스템에 있어 해결해야 할 가장 중대한 문제 중 하나라 할 수 있다. 이에 본 논문에서는 nanowire reconfigurable crossbar 시스템 상에서 사용되어질 수 있는 세 가지의 결함 회피형(defectavoidant) 로직 재할당 알고리듬을 설명하고 다양한 방식으로 평가하였다. 이에 더불어 로직 재할당시에 발생하는 비용과 이로 인해 얻어지는 repair performance를 계량적으로 상호 분석하여 최적화된 repair 방식을 찾아내는 새로운 방안을 소개하였다. 이어 다양한 파라메터들을 이용한 시뮬레이션 결과를 제시함으로써 새로 소개된 cost-driven repair 최적화 방식을 검증하였다.

Chaotic particle swarm optimization in optimal active control of shear buildings

  • Gharebaghi, Saeed Asil;Zangooeia, Ehsan
    • Structural Engineering and Mechanics
    • /
    • 제61권3호
    • /
    • pp.347-357
    • /
    • 2017
  • The applications of active control is being more popular nowadays. Several control algorithms have been developed to determine optimum control force. In this paper, a Chaotic Particle Swarm Optimization (CPSO) technique, based on Logistic map, is used to compute the optimum control force of active tendon system. A chaotic exploration is used to search the solution space for optimum control force. The response control of Multi-Degree of Freedom (MDOF) shear buildings, equipped with active tendons, is introduced as an optimization problem, based on Instantaneous Optimal Active Control algorithm. Three MDOFs are simulated in this paper. Two examples out of three, which have been previously controlled using Lattice type Probabilistic Neural Network (LPNN) and Block Pulse Functions (BPFs), are taken from prior works in order to compare the efficiency of the current method. In the present study, a maximum allowable value of control force is added to the original problem. Later, a twenty-story shear building, as the third and more realistic example, is considered and controlled. Besides, the required Central Processing Unit (CPU) time of CPSO control algorithm is investigated. Although the CPU time of LPNN and BPFs methods of prior works is not available, the results show that a full state measurement is necessary, especially when there are more than three control devices. The results show that CPSO algorithm has a good performance, especially in the presence of the cut-off limit of tendon force; therefore, can widely be used in the field of optimum active control of actual buildings.

개구부가 있는 밀폐공간내 화재의 복합열전달 및 연소가스 분석에 관한 연구 (A Study on the Combined Heat Transfer and Analysis Fire Induced Combustion Gas in a partially Open Enclosure)

  • 박찬국;추병길;김철
    • 한국화재소방학회논문지
    • /
    • 제11권1호
    • /
    • pp.21-35
    • /
    • 1997
  • The natural convection and combined heat transfer induced by fire in a rectangular enclosure is numerically studied. The model for this numerical analysis is partially opened right wall. The solution procedure includes the standard k-$\varepsilon$ model for turbulent flow and the discrete ordinates method (DOM) is used for the calculation of radiative heat transfer equation. In numerical study, SIMPLE algorithm is applied for fluid flow analysis, and the investigations of combustion gas induced by fire is performed by FAST model of HAZARD I program. In this study, numerical simulation on the combined naturnal convection and radiation is carried out in a partial enclosure filled with absorbed-emitted gray media, but is not considered scattering problem. The streamlines, isothermal lines, average radiation intensity and kinetic energy are compared the results of pure convection with those of the combined convection-radiation, the combined heat transfer. Comparing the results of pure convection with those of the combined convection-radiation, the combined heat transfer analysis shows the stronger circulation than those of the pure convection. Three different locations of heat source are considered to observe the effect of heat source location on the heat transfer phenomena. As the results, the circulation and the heat transfer in the left region from heating block are much more influenced than those in the right region. It is also founded that the radiation effect cannot be neglected in analyzing the building in fire. And as the results of combustion gas analysis from FAST model, it is found that O2 concentration is decreased according to time. While CO and CO2 concentration are rapidly increased in the beginning(about 100sec), but slowly decreased from that time on.

  • PDF

생활권 개념의 변화에 따른 주거지 계획의 시기별 특성 변화 - 국내 신도시 및 신시가지 계획을 중심으로 - (An Analysis of the Characteristics of the Transition Trand of the Multi-family Housing Theory by Planning Community Units - Focused on the new town planning in Korea -)

  • 이종화;구자훈
    • 한국주거학회논문집
    • /
    • 제20권4호
    • /
    • pp.79-88
    • /
    • 2009
  • A planned access method on constantly-changing-community unit plan changes and develops based on the periodical situation and also plan theory. In this research, it is to present the link between the theory of complex city change and the plan factor of it, and to show how Korean residential complex plan has changed as time passed and how new concept of city plan came up and by applying new methods how can this affect our real world and the past plan. In the phase of analysis, it analyzed the flow of 'community unit plan' and its theory and investigated the factor of compositional space and built a analysis frame. The factors of community unit plan are space structure, size and shape of block, population, distribution of facilities and movement system. It chose the place that can represent the flow of community unit plan trand and that indicates the obvious development leading to Jamsil (1975), Gwa Chun (1980), Mok Dong (1983), Sang Ge (1985), Ilsan (1989), Dong tan (2001) and Eun Jung (2003) total of 7 places. And to compare a similar size of the city, it selected a small community unit. Based on the result of theoretical study and prior research, it can be said that the space composition style has change from a whole complete complex area to a linked-cross over community unit and the access of urban level was on set. Also, a pedestrian walking area was secured and the dense of building structure and pleasant environment wanting need was in balance. For facility plans, the usage of facility and functional change brought change of type, size and disposition. The walking area for pedestrian became a huge matter. Therefore, market, education, public facilities and green system collaborated to co-build a whole community unit and activated the walking environment. Also, public transportation, environment friendly city organization was built.

ARM Cortex-M3 상에서 곱셈 연산 최적화 구현 (Compact Implementation of Multiplication on ARM Cortex-M3 Processors)

  • 서화정
    • 한국정보통신학회논문지
    • /
    • 제22권9호
    • /
    • pp.1257-1263
    • /
    • 2018
  • 경량 사물인터넷 디바이스 상에서의 암호화 구현은 정확하고 빠르게 연산을 수행하여 서비스의 가용성을 높이는 것이 중요하다. 특히 곱셈 연산은 RSA, ECC, 그리고 SIDH와 같은 공개키 암호화에 활용되는 핵심 연산으로 최적화된 구현이 요구된다. 하지만 최신 저전력 프로세서인 ARM Cortex-M3 프로세서의 경우에는 곱셈연산 입력 크기에 따라 수행속도가 달라지는 보안 취약점을 가지고 있다. 수행속도가 달라지게 될 경우 연산 시간의 차이점을 확인하여 비밀정보를 추출하는 것이 가능하다. 이를 보완하기 위해 최근 연구에서는 고정된 연산 시간 안에 곱셈 연산을 수행하는 기법이 제안되었다. 하지만 해당 구현에서는 여전히 속도가 완전히 최적화되어 있지 않다. 본 논문에서는 기존에 제안된 곱셈연산을 보다 효율적으로 연산하기 위한 기법을 제안한다. 제안된 기법은 기존 방식에 비해 연산 속도를 최대 25.7% 향상시킨다.

춘천지역 일부 유치원 원아의 식습관 및 생활습관에 관한 조사 (Eating behavior and life habits of kindergarten children in Chuncheon area)

  • 이희섭;이혜숙;이인숙
    • 대한가정학회지
    • /
    • 제37권3호
    • /
    • pp.175-191
    • /
    • 1999
  • The purpose of this study was to investigate the eating behavior and life habits of kindergarten children 5 to 7 years old in Chuncheon area. This study was conducted in December, 1996. Anthropometric indices(height, weight, skinfold thickness, mid-arm circumference) were measured and body mass index(BMI), Rohrer index, arm fat area were calculated to estimate children’s body fatness. Also the eating behavior and life habits were determined tv using questionnaire method. The results were as follows: Body fat rate of the children was almost normal according to Rohrer index and BMI. There was significant difference in birth weight between male and female. The problems of the eating behavior were frequent skipping breakfast and eating-out. The rate of the children who took snacks 2 times a day was 46.9%. Most children tended to take sweet snacks such as ice-cream, chocolates, cookies, and they tended to prefer meats and fishes to vegetables. The rate of breast feeding was 28.3% and the rate of weaning foods prepared at home was 61.1%. Many children preferred indoor activities such as watching TV, toy furniture play, building block to outdoor activities such as roller-skating, cycling, jogging in their spare time. The rate of the children who took exercise regularly was 15%. Children tended to eat kimbap, fried chicken, ramyeon more frequently in various instant foods. The intake rates of fruit juice and barly tea were relatively high and children's favorite fruits were watermelon and mandarin orange. From this results, skipping breakfast, frequent eating-out and the monotony of food preference appears to cause imbalance in nutrient intakes of the children and to have bad influence on children’s health. Accodgingiy, the comprehensive nutrition education and proper modification program should be needed for the children and their parents to correct the eating behavior and life habits. The reasonable exercise programs are needed to motivate outdoor activities of the children, and the importance of breast feeding and weaning foods should be emphasized to lactating women and pregnant women.

  • PDF