• Geomechanics and Engineering
• /
• v.28 no.6
• /
• pp.599-611
• /
• 2022

Tendon reinforced cemented soil is applied extensively in foundation stabilisation and improvement, especially in areas with soft clay. To solve the deterioration problem led by steel corrosion, the glass fiber-reinforced polymer (GFRP) tendon is introduced to substitute the traditional steel tendon. The interface bond strength between the cemented soil matrix and GFRP tendon demonstrates the outstanding mechanical property of this composite. However, the lack of research between the influence factors and bond strength hinders the application. To evaluate these factors, back propagation neural network (BPNN) is applied to predict the relationship between them and bond strength. Since adjusting BPNN parameters is time-consuming and laborious, the particle swarm optimisation (PSO) algorithm is proposed. This study evaluated the influence of water content, cement content, curing time, and slip distance on the bond performance of GFRP tendon-reinforced cemented soils (GTRCS). The results showed that the ultimate and residual bond strengths were both in positive proportion to cement content and negative to water content. The sample cured for 28 days with 30% water content and 50% cement content had the largest ultimate strength (3879.40 kPa). The PSO-BPNN model was tuned with 3 neurons in the input layer, 10 in the hidden layer, and 1 in the output layer. It showed outstanding performance on a large database comprising 405 testing results. Its higher correlation coefficient (0.908) and lower root-mean-square error (239.11 kPa) were obtained compared to multiple linear regression (MLR) and logistic regression (LR). In addition, a sensitivity analysis was applied to acquire the ranking of the input variables. The results illustrated that the cement content performed the strongest influence on bond strength, followed by the water content and slip displacement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1890-1897
• /
• 2021

People counting is an important technology to provide application services such as smart home, smart building, smart car, etc. Due to the social distancing of COVID-19, the people counting technology attracted public attention. People counting system can be implemented in various ways such as camera, sensor, wireless, etc. according to service requirements. People counting system using WiFi AP uses WiFi CSI data that reflects multipath information. This technology is an effective solution implementing indoor with low cost. The conventional WiFi CSI-based people counting technologies have low accuracy that obstructs the high quality service. This paper proposes a deep learning people counting system based on WiFi CSI data. Data preprocessing using auto-encoder, data augmentation that transform WiFi CSI data, and a proposed deep learning model improve the accuracy of people counting. In the experimental result, the proposed approach shows 89.29% accuracy in 6 subjects.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.891-898
• /
• 2022

Purpose: There is not much time left for mandatory BIM implementation for all sectors and stages of the construction industry. Therefore, it is necessary to find a way to secure technology to substantially improve the productivity of BIM work. In the research, we proposed a method to automatically verify related construction standards for major objects produced by BIM modeling procedures so that engineers can verify construction standards in the BIM-based design process. Method: We defined a modeling work procedure for BIM-based road design work and prepared a method for constructing related design standards in a database. In addition, a process map for developing a BIM-based design basis review automation system was also presented. Result: A BIM-based design standard review automation module was developed using Civil3D and Dynamo. And it was confirmed by the test application that it is possible to quickly judge whether the BIM object manufactured in the design process conforms to the construction design standard. Conclusion: BIM-based design standard review automation technology can improve the productivity of BIM model production work and secure the quality of the BIM model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.364-364
• /
• 2023

최근 환경부에서 발표한 「제3차(2021~2025) 강우유출 비점오염관리 종합대책(2020)」에 의하면, 우리나라는 지난 50년간 급격한 도시화, 산업화 과정을 거치면서 불투수면적이 전 국토의 약 22.4%에 달한다고 보고되고 있다. 특히 전체 소권역의 6%에 해당하는 51개 소권역의 경우 불투수 면적률 25%를 넘어서고 있는 것으로 조사되었다. 이러한 불투수면의 증가는 기후변화에 의한 영향으로 토양 침투량과 기저유출량을 감소, 갈수기 하천건천화 심화, 우기 표면유출수 증가를 가중시키며 이로인한 비점오염물질 유입 증가, 수질 악화의 원인으로 작용 될 수 있다. 이에 정부에서는 저영향개발(Low Impact Development, LID) 사업 및 친환경그린인프라(Green Infrastructure, GI) 기술요소를 적용하여 도시지역 기후위기 대응 수단의 일원으로 우수유출 저감, 물순환 구조 개선, 비점오염원을 관리하고자 '그린빗물인프라(Green Stormwater Infrastructure, GSI) 조성 사업'을 추진하여 공공청사를 중심으로 학교, 도서관, 체육시설, 공원 등 적용 범위를 확대하고 있다. 이에 본 연구에서는 기후변화에 가장 취약한 해안도시지역인 경상남도에 위치하고 있으며, 불투수면적이 높고 노후화된 소규모 청사 2곳을 시범 구역으로 선정하였다. 각 시범 구역별 GSI 시설 적용이 가능한 주차장, 화단, 옥상 등의 개선방안을 제시하였으며, 적용 규모를 달리하여 물순환·물 환경 개선 효과를 검증하였다. 검증에는 국내에서 개발된 K-LIDM 모형을 활용한 우수유출저감 및 직접유출체적 산정결과를 통해 물순환 효과를, 국립환경과학원에서 제시되고 있는 '토지계 지목별 발생부하원단위', 수질환경개선 보고서에서 제시된 침투형, 식생형 비점오염저감시설의 저감효율을 활용하여 물순환 저감효과를 분석하여 비교하였다.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.400-408
• /
• 2009

Simulation applications for analyzing the productivity of construction operations at operation level and project schedules at project level are crucial methods in project management. The application at two different levels should be very tightly linked to each other in practice. However, appropriate integration at the levels is not achieved in that existing systems do not support to integrate operation models into a schedule model. This paper presents a new approach named to Discrete Event Simulation-Nesting modeling approach, which supports not only productivity analysis at operation level but also schedule management at a project level. The system developed by the authors allows creating operation models at the operation level, maintaining them in operation model library, executing sensitivity analysis to find the behaviors of the operation models when different combination of resources are used as existing DES systems do. On top of the conventional functions, the new system facilitates to find the optimum solution of resource combinations which satisfy the user's interest by computing the hourly productivity and the hourly cost of the operation. By drag-and-dropping an operation model kept in the operation model library, the operation models are integrated into an activity of the schedule model. When a complete schedule model is established by nesting operation models into the schedule model, stochastic simulation based scheduling is executed. A case study is presented to demonstrate the new simulation system and verify the validity of the system.

• Steel and Composite Structures
• /
• v.45 no.3
• /
• pp.437-454
• /
• 2022

Elliptic-braced simple resisting frame as a new lateral bracing system installed in the middle bay of frame in building facades has been recently introduced. This system not only creates a problem for opening space from the architectural viewpoint but also improves the structural behavior. Despite the researches on the seismic performance of lateral bracing systems, there are few studies performed on the effect of the stiffness parameters on the elastic story drift and calculation of period in simple braced steel frames. To overcome this shortcoming, in this paper, for the first time, an analytical solution is presented for calculating elastic lateral stiffness in a simple steel frame equipped with elliptic brace subjected to lateral load. In addition, for the first time, in this study, a precise formulation has been developed to evaluate the elastic stiffness variation in a steel frame equipped with a two-dimensional single-story single-span elliptic brace using strain energy and Castigliano's theorem. Thus, all the effective factors, including axial and shear loads as well as bending moments of elliptic brace could be considered. At the end of the analysis, the lateral stiffness can be calculated by an improved and innovative relation through the energy method based on the geometrical properties of the employed sections and specification of the used material. Also, an equivalent element of an elliptic brace was presented for the ease of modeling and use in linear designs. Application of the proposed relation have been verified through a variety of examples in OpenSees software. Based on the results, the error percentage between the elastic stiffness derived from the developed equations and the numerical analyses of finite element models was very low and negligible.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.3-19
• /
• 2009

The purpose of this study was to systemize the 'Eagi(理氣)' theory in Feng Shui which has been neglected in Korea because of its difficulties in the current Feng Shui theory and to make it easier to apply in the art of placement. The study also analysed the characteristics of the location of a sample village in terms of Feng Shui. Besides the placement analysis, the interpretation of the Yangtaek(陽宅) theory was analysed on the layout of the outdoor space of the building. As the initial step, various theories about Feng Shui were investigated. Based on those, the framework of the Feng Shui theory was summarized for application to the case study. Yangtaeksamyo(陽宅三要) was referred to for consideration of Feng Shui theory outside the residential buildings. At the same time, configurational analysis of the ground was carried out with the naked eye and actual measurements were taken using a specific compass(佩鐵). The results were summarized as follows : First, the 'Eagi' theory in Feng Shui, which finds a 'lucky site(穴)' selects the 'geomagnetic aspect(坐向)' by analyzing the natural forces of wind and water. In this theory, the aspect was regarded of most importance. 'Yangtaek Feng Shui (陽宅風水)' was the theory that people's ups and downs depends on the direction of the place where they live on, and was developed on the basis of 'I ching(周易)'. Second, the village and the house in the case study have been considered as lucky places from old times and this was equally verified by the 'Eagi (理氣)' theory and the "Yangtaek (陽宅)' theory.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1147-1161
• /
• 2023

The Internet of Things (IoT) requires a new processing model that will allow scalability in cloud computing while reducing time delay caused by data transmission within a network. Such a model can be achieved by using resources that are closer to the user, i.e., by relying on edge computing (EC). The amount of IoT data also grows with an increase in the number of IoT devices. However, building such a flexible model within a heterogeneous environment is difficult in terms of resources. Moreover, the increasing demand for IoT services necessitates shortening time delay and response time by achieving effective load balancing. IoT devices are expected to generate huge amounts of data within a short amount of time. They will be dynamically deployed, and IoT services will be provided to EC devices or cloud servers to minimize resource costs while meeting the latency and quality of service (QoS) constraints of IoT applications when IoT devices are at the endpoint. EC is an emerging solution to the data processing problem in IoT. In this study, we improve the load balancing process and distribute resources fairly to tasks, which, in turn, will improve QoS in cloud and reduce processing time, and consequently, response time.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.3
• /
• pp.27-39
• /
• 2009

This paper describes a case study on an enterprise ontology(30) based analysis and representation of the production operation in shipbuilding. The production operation consists of steel fabrication, assembly, election, launching, sea trial and delivery process. We represent and analyze the steel fabrication process and the piping design business of the assembly process among them. First, we build an ontology on concepts of steel fabrication process and the piping design business of assembly process. And then we merge it with the original EO. We represent each process and analyze current state of production process with the merged EO and $Prot{\acute{e}}g{\acute{e}}$ plug-ins. Moreover, we can analyze dependency relations among the workflow elements. Through the case study, we have found the effectiveness of EO in business management and process management in complex heavy industries.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.42-48
• /
• 2023

In recent years, automated vehicles have garnered attention in the multidisciplinary research field, promising increased safety on the road and new opportunities for passengers. High-Definition (HD) maps have been in development for many years as they offer roadmaps with inch-perfect accuracy and high environmental fidelity, containing precise information about pedestrian crossings, traffic lights/signs, barriers, and more. Demonstrating autonomous driving requires verification of driving on actual roads, but this can be challenging, time-consuming, and costly. To overcome these obstacles, creating HD maps of real roads in a simulation and conducting virtual driving has become an alternative solution. However, existing HD maps using high-precision data are expensive and time-consuming to build, which limits their verification in various environments and on different roads. Thus, it is challenging to demonstrate autonomous driving on anything other than extremely limited roads and environments. In this paper, we propose a new and simple method for implementing HD maps that are more accessible for autonomous driving demonstrations. Our HD map combines the CARLA simulator and OpenStreetMap (OSM) data, which are both open-source, allowing for the creation of HD maps containing high-accuracy road information globally with minimal dependence. Our results show that our easily accessible HD map has an accuracy of 98.28% for longitudinal length on straight roads and 98.42% on curved roads. Moreover, the accuracy for the lateral direction for the road width represented 100% compared to the manual method reflected with the exact road data. The proposed method can contribute to the advancement of autonomous driving and enable its demonstration in diverse environments and on various roads.