• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.3
• /
• pp.69-77
• /
• 2015

Purpose: Under a trend of hospitals that repeated expansion in line with fast increasing factors of medical demands in the past, medical buildings where clinic businesses have regularly gathered in one building have exponentially increased since separation of prescribing and dispensing in 2000. Thus, this study aims at analyzing characteristics of architectural plan of the current medical buildings, identifying strengths and weaknesses through Post Occupancy Evaluation and suggesting an architectural planning method of medical buildings to be planned in the future. Methods: Scope of study has been limited to 23 medical buildings that are registered in the building register as medical buildings out of the Class 1 neighborhood facilities build as 5 floors or more in Cheongju region since 2000 and being actually used for the usage. Study method is to define concepts of the medical buildings through literature review and advanced researches, analyze characteristics of architectural plan through drawing analysis and site survey. Results: General characteristics of architectural plans for the medical buildings in Cheongju have been analyzed. There are the most frequencies in general commercial area and semi-residential area, most of them are reinforced concrete structure and the Class 1 neighborhood facilities. Average land area is $482.68m^2$, gross floor area $3720.8m^2$, the number of underground floors level 1.16, the number of floors level 7.76, total number of floors 8.92, the building-to-land ratio 67.28%, floor area ratio 452.6%, height 31.44m, and the number of parked vehicles 24.16. Implications: This research will contribute to the establishment of the planning methods which increase the quality of Medical Buildings in Cheongju.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.59-67
• /
• 2007

This paper proposes potentialities of constructing the information system for earthquake hazard management which can manage and analyse earthquake risk and hazard systematically. The experimental results as well as architectural structure investment data for seismicity assessment are built in database and connected with GIS for assessing earthquake safety of building in urban area. For earthquake-resistant performance assessment, we collected and classified building structural data according to assessment criteria using building register, architectural map, digital map, and then complemented database with field survey data. We also suggest GIS-based information system can cope with and manage earthquake hazard effectively, as evaluating earthquake risk by performing detailed earthquake-resistant assessment and determining final assessment scores. The assessment should be processed quickly and accurately by integrating the earthquake hazard information management system with modularization of assessment procedure and method in the future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.133-142
• /
• 2004

As the city grows in population and size, land-use plan increasingly becomes a crucial element in developing a city-wide plan. In the process of developing the land use plan, identifying the present conditions and predicting the future conditions are the most important steps. That is, to understand the phenomena of land-use activities as well as to manage uses of the land efficiently require the comprehensive land use information system. This study intends to construct the land use database utilizing the Cadastral Map and Registered Building Data and to examine and suggest the application areas of the database. The database was constructed with those of Busan Metropolitan City. Using the established data, it shows how to use the database to identify the present conditions in Busan.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.59-68
• /
• 2017

This paper aims at finding some lessons applicable to successful implementation of 'The 3D Printing R/D Project' through both examining the process of adopting overseas industrialized housing production technological knowhow by home builders during the 1970's~1980's period and thereafter until now the various efforts to adjust the technologies efficiently to the Korea's unique situation. Some meaningful lessons can be summarized as follows; I) Deep understanding of 3DP technological know-why along with its inheritance, II) Readjusting of R/D period and goals(cf. Global leader Winsun's 15 years experiment), III) Restructuring for more collaborative R/D B&E system among participating researchers IV) Fostering 3DP expert-engineers and technicians from the early stage, V) Clearing legal barriers in users' adopting 3DP methods necessary, VI) Development of appropriate building material besides concrete. Therefore, it is highly recommended that the above-mentioned 6 lessons positively accepted and applied to the Research Implementation Plan in due course, especially by KICT consortium and KAIA under the guidance of Ministry of Land, Infrastructure and Transport.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.1 s.24
• /
• pp.61-69
• /
• 2003

The study is the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen for evaluation of accuracy of satellite positioning. First, suggest the validity of RTK-GPS, RTK-GPS/GLONASS and compared the accuracy with that of the classical surveying method. As a result. In urban area, in case of real time kinematic positioning when compare between the method combined by GPS/GLONASS and by GPS alone the result of GPS/GLONASS - combination more excellent. And in open ana positioning combined GPS/GLONASS was more excellent than GPS alone in both real time differential and real time kinematic. So, RTK-GPS, RTK-GPS/GLONASS contribute to the digital mapping of Basic map and the existed map necessary for the building of PBLIS to the computerization of cadastral map in the effectiveness in time and in cost and hereafter the combined GPS/TS is expected to contribute to the development of NGIS, Re-investigation of a land register, the execution drawing on site.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1319-1328
• /
• 2016

Since Ballast Water Management Convention has been effected, BWTS, applied to new-building vessels and existing vessels, have been developed from many countries with various treatment methods. However, BWTS is mainly typed Electrolysis, Ozone and UV type. Approximately 70 products have been type approved by the Flag Administrations. For the new-building vessels, the vessels' design and construction have been considered for arrangements and installations for BWTS. However, existing vessels which already construction had finished have problem with selection of BWTS type for installation and arrangement. The selection of the most economized BWTS system is important though, CAPEX has not been made any significant differences. However, OPEX is more important factor. Consequently, detail analysis of OPEX is the key to the selection of the most economized BWTS system and also it can be the purpose of this study. The feasibility study on the main three type of BWTS (Electrolysis, Ozone and UV type) for 175K Bulk Carrier and 57K Cargo ship has been conducted for this study. Because, these three type of BWTS have been the most frequently installed and used and the two type of object vessels are consist of the 40% of the world merchant ship market. For this study, interest rate, project duration (operation time after installation), maintenance cost and fuel oil price are considered as major factor of feasibility study. In addition, expecting Interest rates to sensitivity analysis conducted for more accurate feasibility study. For 175K Bulk carrier, ozone treatment system is more economical than other types. For 57K cargo ship, UV type is considered more economical than other types. However, it is concluded that electrolysis type is more suitable compare to installation space, total weight and electrical power consumption.

• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.301-310
• /
• 2020

The purpose of paper is to find index for building digital database of bike infrastructure statistics by analyzing the existing design standards and manuals. The design standards and guides of both central and local governments which designates the design elements of bikeway were investigated to find the primary index, and then the attribute data of bikeway were grouped into four categories including transportation, geometry, pavement, safety and utility facility, and were analyzed to find the secondary index. A FGI(Focus Group Interview) was conducted with experts in the arena of transportation to collect the opinions on the selected index. It is found that the final twenty four design elements were selected and additional six elements were added. The proposed twenty four index of bikeway design elements are considered to be included when building the digital bikeway register database.

• Journal of Information Technology Services
• /
• v.21 no.3
• /
• pp.63-72
• /
• 2022

The extinction crisis of local cities, caused by a population density increase phenomenon in capital regions, directly causes the increase of vacant houses in local cities. According to population and housing census, Gunsan-si has continuously shown increasing trend of vacant houses during 2015 to 2019. In particular, since Gunsan-si is the city which suffers from doughnut effect and industrial decline, problems regrading to vacant house seems to exacerbate. This study aims to provide a foundation of a system which can predict and deal with the building that has high risk of becoming vacant house through implementing a data driven vacant house prediction machine learning model. Methodologically, this study analyzes three types of machine learning model by differing the data components. First model is trained based on building register, individual declared land value, house price and socioeconomic data and second model is trained with the same data as first model but with additional POI(Point of Interest) data. Finally, third model is trained with same data as the second model but with excluding water usage and electricity usage data. As a result, second model shows the best performance based on F1-score. Random Forest, Gradient Boosting Machine, XGBoost and LightGBM which are tree ensemble series, show the best performance as a whole. Additionally, the complexity of the model can be reduced through eliminating independent variables that have correlation coefficient between the variables and vacant house status lower than the 0.1 based on absolute value. Finally, this study suggests XGBoost and LightGBM based machine learning model, which can handle missing values, as final vacant house prediction model.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.208-211
• /
• 2006

This study was to find out contemporary planning trends of rural houses in Na-po Munhwa village by analyzing their floor plan shapes and space relations & elements. There were built 240 houses in that village, but it were possible to collect housing data, floor plans & general building records of 120 houses, from house register. By analyzing those data, findings were as follows : 1) Floor plan shapes of rural houses had a tendency to 'ㅋ' shape type than simple box or transformed box types, and Room-Living-Room arrangement of centered living were very strong trends in those plans. 2) Public spaces, L.D.K

• Korean Journal of Agricultural Science
• /
• v.33 no.1
• /
• pp.43-56
• /
• 2006

In this thesis we aim at analyzing international competitive power of Chinese ginseng in comparison with Korean ginseng and searching policy direction for Korea to compete Chinese ginseng industry. We summarized the research results as follows; First, we examine the structural change of ginseng industry of China. Second, we review the theories for international competitiveness and apply the method of analyzing competitiveness to ginseng industry. Third, we compared the international competitive power of the ginseng industry between China and Korea and found that Chinese ginseng, estimated by Revealed Comparative Advantage(RCA) at about 15, still remains high competitiveness in terms of cost and price but lowering price competitiveness recently. Based on the research results, we suggest export promotion strategies of the Korean ginseng as follows; 1) Korean government should enforce trade cooperation with China so as to register Korean root ginseng an importable medicine. 2) Korean ginseng producer should develop various products such as capsules, powders and etc. according to China's consumer purchasing power and taste. 3) Korean ginseng should be sold as an differentiated commodity so that it will contribute to building consumer loyalty to Korean ginseng, makes market share superior to other cheaper ginseng products in China. 4) In order to be effective brand marketing and product advertisement, there should be established reliable networks to process and distribute Korean ginseng products exclusively.