• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.118-121
• /
• 1998

Standardized representations and data codes are crucial for the exchange of information between systems, organizations, and people in the telecommunications operations area. ITU-T M.1400 recommends a unified representation for the international network routes which includes such location data elements as Town A, Suffix Code which was designed for the representation of domestic network locations to meet the ITU-T recommendation. This paper suggests an expanded building ID code for the representation of the international network locations.

• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.655-668
• /
• 2018

This paper analyzes the applicability and technology level of the green building element technology by analyzing the scorecard of the LEED Canada certified buildings. The results of this analysis will be able to evaluate the current status and level of application of green building element technology, and it will be used as a basic data to prepare for the revision of the certification standards and the establishment of strategies for the future green building activation. In this study, 1,010 LEED Canada certified buildings from 2011 to 2016 were analyzed. The results were analyzed by focusing on the status of greening by certification category and the characteristics of adoption by sub-category. The results of the study are summarized as follows. (1) EA category showed the biggest difference between the certification scores and the adoption rates than other categories, and it was confirmed that it is not easy category from the viewpoint of practical adoption. On the other hand, the ID (Innovation & Design Process) and WE were analyzed to be relatively easy to apply, with a score of over 72%. (2) In the case of Platinum class, the upper adoption rate is shown in all categories except MR. The Gold class shows the adoption rate of WE and ID in the top, and the middle rate in most categories. Silver grades showed lower rates in the three categories except WE, ID and EQ. Certified grades showed the adoption rates of the bottom except the two categories.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1263-1265
• /
• 2004

RF-ID system is one of the very interesting field not only in a technical and economical point of view but also that people are still trying to realize lossless power transmission. This paper has a purpose on the efficient power transmission at the passive type IDcard by using wireless power transmission system. The most difficult but important part of the passive type RF-ID system is building the system that supplies power from Reader-antenna to IDcard-antenna. To check what is the most efficient way to deliver power depending on what kind of specifications of the power-amp in reader, antenna and antenna in IDcard is for operating IDcard circuit efficiently receiving the power from reader-antenna. For this, we used 125kHz sinewave for RF signal as a basic specification, OP-amp for amplifying signal and power-amp for amplifying power, loop type antenna.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.53-56
• /
• 2006

WiBro service provider have made an effort to provide the subscriber's location and have deployed LBS system using cell-ID method. Cell-ID method has a location error problem if repeater is used on the other cell places at the same time. We introduce and analysis LMU(Location Measurement Unit) on the repeater fer location detection of subscriber which is serviced via the repeater. In this paper we propose the method using LMU on the repeater to avoid these location errors and to provide more exact location to the subscriber. we can conclude that the location error can be more exact at the building which uses repeater. It represents in which level the subscriber is serviced at the building.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.19-31
• /
• 2022

With the development of 3D-based CAD (Computer Aided Design), attempts at freeform building design have expanded to small and medium-sized buildings in Korea. However, a standardized system for continuous utilization of shape data and BIM conversion process implemented with 3D-based NURBS is still immature. Without accurate review and management throughout the Freeform building project, interference between members occurs and the cost of the project increases. This is very detrimental to the project. To solve this problem, we proposed a continuous utilization process of 3D shape information based on BIM parameters. Our process includes algorithms such as Auto Split, Panel Optimization, Excel extraction based on shape information, BIM modeling through Adaptive Component, and BIM model utilization method using ID Code. The optimal cutting reference point was calculated and the optimal material specification was derived using the Panel Optimization algorithm. With the Adaptive Component design methodology, a BIM model conforming to the standard cross-section details and specifications was uniformly established. The automatic BIM conversion algorithm of shape data through Excel extraction created a BIM model without omission of data based on the optimized panel cutting reference point and cutting line. Finally, we analyzed how to use the BIM model built for automatic conversion. As a result of the analysis, in addition to the BIM utilization plan in the general construction stage such as visualization, interference review, quantity calculation, and construction simulation, an individual management plan for the unit panel was derived through ID data input. This study suggested an improvement process by linking the existing research on atypical panel optimization and the study of parameter-based BIM information management method. And it showed that it can solve the problems of existing Freeform building project.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.141-148
• /
• 2013

Smart grid can two-way communication using ICT(Information & Communication Technology). Also, smart grid can supply to dynamic power that grafted to electric vehicle can activate to electric vehicle charging infrastructure and used to storage battery of home. Storage battery of home can resale to power provider. These electric vehicle charging infrastructure locate fixed on home, apartment, building, etc charging infrastructure that used fluid on user. If don't authentication for user of fluid user use to charging infrastructure, electric charging service can occurred to illegal use, electric charges and leakgage of electric information. In this paper, we propose smartcard and dynamic ID based user authentication scheme for used secure to electric vehicle service in smart grid environment.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.65-81
• /
• 2023

In recent times, there has been a surge in media coverage regarding fraudulent real estate lease scams. These scams have been attributed to speculators who made imprudent gap investments, in response to the sudden decline in real estate prices. The government has established new measures to safeguard tenants and prevent fraudulent real estate lease schemes in response to the growing incidence of tenants falling victim to such scams. Although there have been active research efforts on laws and regulations aimed at protecting tenants, such as the Tenant Protection Act and leasehold registration orders, there is an urgent need for research on the consistency of information across public ledgers, as real estate fraud has surged due to information asymmetry among these ledgers. This study aims to explore matching methodologies using matching keys for building information from real estate-related public ledgers, such as the building register and the road name address ledger, as well as to examine ways to integrate these ledgers with other public ledgers.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.246-249
• /
• 2007

The application of photovoltaics into building as integrated building components has been paid more attention worldwide. Photovoltaics or solar electric modules are sol id state devices, directly converting solar radiation into electricity; the process does not require fuel and any moving parts, and produce no pollutants. And the prefab building method is very effective because the pre- manufactured building components is simply assembled to making up buildings in the construction fields especially the sandwich panel. So, this paper describes a design and performance test of the 10kW poly metal pv module(pmpp) system. It is concluded that the prediction of BIPV system's performance should be based on the more accurate PV module installation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.275-284
• /
• 2008

The digital map needs efficiently updating. Because it is a base map at each local government and several geographic information systems and that is the key to enhancing to use spatial data. We suggest the linking method of building registers to the building layers of digital map, to update attribute data of the building layers. To conduct that, it is very important that each building in two data is linked by one-to-one matching. In this paper, we generate the strategy for renewing attribute data of the building layers based on identifier by using identifier of the new address system.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.27-30
• /
• 2003

Wireless power transmission system is one of the very interesting field not only in a technical and economical point of view but also that people are still trying to realize lossless power transmission. This paper has a purpose on the efficient power transmission at the passive type ICcard by using wireless power transmission system. The most difficult but important part of the passive type RF-ID system is building the system that supplies power from Reader-antenna to IDcard-antenna. To check what is the most efficient way to deliver power depending on what kind of specifications of the power-amp in reader, antenna and antenna in IDcard is for operating IDcard circuit efficiently receiving the power from reader-antenna. For this, we used 125kHz sinewave for RF signal as a basic specification, power-amp : OP-Amp for amplifying signal and AB Class push-pull power-amp for amplifying power, loop type antenna.