• Journal of the Korean housing association
• /
• v.23 no.5
• /
• pp.1-8
• /
• 2012

Recently, there have been frequent occurrence of the damage to lives and properties due to the torrential rain caused by climate change. In consideration of the current situations in which the underlying data related to flooding are lacking, this study conducted to build up the basic data on the flooded areas and suggested methods to secure the evacuation routes that can be accessible to evacuation facilities in the residential buildings. Methods of the study are as follows. First, We calculated the flood risk grades of residential buildings based on elevations, considering the flooding characteristics of the flooded areas in Buk-gu, Daegu. Second, We constructed baseline data on the evacuation routes through site investigation and reviewed of drawing using Arc GIS to identify vulnerability to access to the evacuation facilities, targeting the residential buildings. Third, We carried out the proximity analysis through a near analysis of analysis functions in ARC GIS. Forth, We deduced 115 residential buildings in which access to evacuation facilities is considered to be difficult based on the analysis results. Finally, We proposed extension of a blind alley as a means for achieving connectivity to evacuation facilities. And to evaluate the alternatives presented, we reconstructed route data. As a result, about 53% improvement was identified through the proximity analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.125-138
• /
• 2016

Currently, there is increasing demand for weather information, however, providing meteorology and climate information is limited. In order to improve them, supporting the meteorology and climate big data platform use and training the meteorology and climate big data specialist who meet the needs of government, public agencies and corporate, are required. Meteorology and climate big data requires high-value usable service in variety fields, and it should be provided personalized service of industry-specific type for the service extension and new content development. To provide personalized service, it is essential to build the collaboration ecosystem at the national level. Building the collaboration ecosystem environment, convergence of marine policy and climate policy, convergence of oceanography and meteorology and convergence of R&D basic research and applied research are required. Since then, demand analysis, production sharing information, unification are able to build the collaboration ecosystem.

• Computers and Concrete
• /
• v.2 no.4
• /
• pp.325-343
• /
• 2005

Chloride ingress is a common cause of deterioration of reinforced concrete located in coastal zone. Modeling the chloride ingress is an important basis for designing reinforced concrete structures and for assessing the reliability of an existing structure. The modeling is also needed for predicting the deterioration of a reinforced structure. The existing deterministic solution for prediction model of corrosion initiation cannot reflect uncertainties which input variables have. This paper presents an approach to the fuzzy arithmetic based modeling of the chloride-induced corrosion of reinforcement in concrete structures that takes into account the uncertainties in the physical models of chloride penetration into concrete and corrosion of steel reinforcement, as well as the uncertainties in the governing parameters, including concrete diffusivity, concrete cover depth, surface chloride concentration and critical chloride level for corrosion initiation. There are a lot of prediction model for predicting the time of reinforcement corrosion of structures exposed to chloride-induced corrosion environment. In this work, RILEM model formula and Crank's solution of Fick's second law of diffusion is used. The parameters of the models are regarded as fuzzy numbers with proper membership function adapted to statistical data of the governing parameters instead of random variables of probabilistic modeling of Monte Carlo Simulation and the fuzziness of the time to corrosion initiation is determined by the fuzzy arithmetic of interval arithmetic and extension principle. An analysis is implemented by comparing deterministic calculation with fuzzy arithmetic for above two prediction models.

• Korean Journal of Health Education and Promotion
• /
• v.29 no.5
• /
• pp.125-133
• /
• 2012

Objectives: We used participatory mapping as a tool for empowerment training for promoting health and safety of farmers. We would like to introduce the application of participatory mapping method and report our experiences in a rural community in Korea. Methods: A one-day workshop was offered in six rural villages which were designated as 'safe farm zones'. Each workshop started with an orientation session, followed by a village rounding, presentations of best cases, a group exercise to draw and present a healthy village map. Participants were requested to express their ideas and experiences about healthy and safe residential and working environments on their map. Results: A total of 206 farmers(100 male, 106 female) participated in the workshops. In each workshop, an average of 34.3 farmers participated, and their mean age was 59 years. In the six workshops, the participants proposed a total of 137 action plans. The action plans included improvement of co-working condition, building facilities for recreation, improving traffic safety measures, and improving residential environment. Conclusions: Participatory mapping was successfully developed and applied as a tool for empowering Korean farmers. The participants were able to express their ideas and thoughts about healthy and safe village and action plans on the map. Moreover, some of the actions in the action plans were carried out immediately after workshop.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.793-808
• /
• 2018

In this study, the seismic performance of the connections between L-shaped columns composed of concrete-filled steel tubes (L-CFST columns) and H-beams used in high-rise steel frame structures was investigated. Seven full-scale specimens were tested under quasi-static cyclic loading. The variables studied in the tests included the joint type, the axial compression ratio, the presence of concrete, the width-to-thickness ratio and the internal extension length of the side plates. The hysteretic response, strength degradation, stiffness degradation, ductility, plastic rotation capacity, energy dissipation capacity and the strain distribution were evaluated at different load cycles. The test results indicated that both the corner and exterior joint specimens failed due to local buckling and crack within the beam flange adjacent to the end of the side plates. However, the failure modes of the interior joint specimens primarily included local buckling and crack at the end plates and curved corners of the beam flange. A design method was proposed for the flexural capacity of the end plate connection in the interior joint. Good agreement was observed between the theoretical and test results of both the yield and ultimate flexural capacity of the end plate connection.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.5-13
• /
• 2017

Purpose: Various studies have been performed to address the issue of increased energy use by buildings. In particular, research on complex envelopes that combines diverse envelope element techniques is currently in progress in the building sector. The present study aimed to develop an awning system using a light shelf, and to verify its validity through performance evaluation. Method: In the present study, a testbed was established for the performance evaluation of the awning system using a light shelf, and the uniformity ratio and lighting energy consumption were compared and analyzed relative to those with no awning and light shelf installation (Case 1), awning installation (Case 2), and light shelf installation (Case 3). Result: 1) In the present study, an awning system using a light shelf (Case 4) where an opening is made on the awning screen and natural light can be introduced through the light shelf located at the bottom was developed. 2) The optimum standard for Case 4 obtained through the performance evaluation was a 0.6m lighting length and a 2m extension length at a light shelf angle of $30^{\circ}$. 3) Case 4 with the optimum standard had a 5.5% lower uniformity ratio than Case 2, but had a higher uniformity ratio than Case 1 and Case 3. 4) Case 4 with the optimum standard showed 13.3%, 44.6%, and 0%~8.7% lighting energy reductions compared to Case 1, Case 2, and Case 3, respectively. 5) Based on the above results, Case 4 suggested in the present study was found to be effective for indoor light environment improvement and lighting energy reduction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6751-6758
• /
• 2015

The Special Act on Safety Control for Infrastructure was enacted in 1995 to contribute to ensuring the public safety and welfare improvement of Korean people. In addition, the FMS has been developed and operated to manage facilities effectively. However, several problems of the FMS have also occurred. Thus, this study aimed to analyze the FMS and related systems scrutinizingly to suggest improvement directions such as (1) extension of the FMS into the national facility information management system including small-size facilities other than Types 1 and 2 facilities, (2) development and promote standardized inspection and diagnosis systems as per facility type, (3) development of the database utilization system including decision making support function for management body, and (4) providing the FMS performance improvements and stable operating environment utilizing latest information technologies. If the improvement directions suggested in this study are adopted, they can improve services for Korean people by providing facility safety and maintenance work parties with optimum information services.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.242-257
• /
• 2012

Korea's population change trend is the aging and feminization as Reduction in mortality, average life extension. and is further increased Reduction of birth rate and aging population. if Our country concluded FTA(Free Trade Agreement) with the United States, Europe and China etc. labor-intensive industries will be the decline. Then, the construction workers' jobs are continually reduced. This is critical to the nation's economic, social and environmental influences due to Shortage of construction workforce and increasing labor costs. Eventually this is a major factor in reduced construction productivity. Therefore, this study is presented as a construction productivity development prospects on the value-added analysis per Labour productivity employee from Construction market trends, industry-specific productivity index, industry trends Employed, age tiered workforce trends, women's workforce trends, labor time trend, foreign workers, workforce trends, analysis of trends in construction contract, awarded by Company Size trends, construction management analysis index.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.449-456
• /
• 1999

본 논문은 C++에 분산 객체 프로그래밍 기능을 추가한 D++ 언어를 제안한다. 대등관계 복제객체 모델을 지원하는 D++는 분산 클래스의 정의, 멤버 함수의 일치성 제어 정의 기능, 그리고 영구 객체 이름에 기반한 분산 객체를 정의할 수 있는 언어 구조를 제공한다. D++ 프로그램에서 새로이 생성되는 분산 객체는 생성 시에 제공되는 객체의 영구 이름과 동일한 영구 이름을 갖는 분산 객체가 존재할 경우 해당 객체들과 복제 관계를 유지함으로써 정보를 공유한다. 각 복제 객체들은 서로 간에 대등한 관계를 가지며, 멤버 함수 정의 시에 기술되는 특성에 따라 일치성이 유지된다. 이 같은 D++의 분산 객체 모델은 실시간 그룹웨어의 기본 요구 사항인 분산 환경에서의 정보 공유 및 사건 공지 기능을 자연스럽게 해결해 주기 때문에 실시간 그룹웨어의 개발을 효율적으로 지원할 수 있을 것으로 기대한다. Abstract This paper proposes D++ programming language that is an extension of C++ for distributed object oriented programming. The D++, which supports peer-to-peer object model, provides new language constructs for the definition of distributed classes, the definition of the consistency control of the member function and the definition of distributed object variables with the persistent name. In D++, when the persistent name of a newly created distributed object is same as that of an existing distributed object, the new distributed object replicates object state of the existing distributed object and thus they share the object state. The replicas have peer relation and the consistency among them is maintained according to the characteristic described on the definition of designated member functions. It is expected that D++ language increases efficiency in development of real-time groupware because the distributed object model of D++ naturally supports the information sharing and event notification that are the basic functions required when building real-time groupware.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.123-128
• /
• 2007

Already, core wall construction method for apartment wall structure and general building special areas applied the engineering method's appropriate examination. Also, trial and error depending on slip-form method is a good examination opportunity to consider. In the present paper's slip-form engineering method l)Casting concrete to slab in sliding 2)RC structure + SRC structure (part of segment) 3)Inside segment variation(straight line-diagonal-circle) are together while determining whether it is possible not to carry out actual construction work on the structure. Finally, small problems continuously appear on actual slip-form method application, design and engineering, starting with planning thoroughly the field examination and diagnosing the atmosphere, minimizing cost, secure work safety facilities characterized by good quality, slip-form research extension, development and decision-making.