• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.80-87
• /
• 2021

Most container ships are currently being constructed as Ultra-Large Container Ships. Hence, the equipment of the ships is also becoming relatively large. In particular, propellers, rudders, and rudder stocks are large in the stern structure, and in relation, efficient design of the hull structures to safely secure these parts is important. The bottom shell plate surface of a stern skeg is a perforated plate from which the rudder stock penetrates, so it is an important component for the stern structure. In this paper, to determine the critical buckling of the shell plate, an interaction curve equation for the two-axis compression of the shell plate was derived using the maximum value of the static structural stress multiplier in a load multiplier mode. This equation predicts the timing of the buckling occurrence. By analyzing this interaction curve equation, the buckling behavior of the plates subjected to a combination load was determined and the usefulness of applying it to ship building was investigated.

• 상하수도학회지
• /
• 제35권1호
• /
• pp.53-61
• /
• 2021

The quantified analysis of damages to wastewater treatment plants by natural disasters is essential to maintain the stability of wastewater treatment systems. However, studies on the quantified analysis of natural disaster effects on wastewater treatment systems are very rare. In this study, a total disaster index (DI) was developed to quantify the various damages to wastewater treatment systems from natural disasters using two statistical methods (i.e., AHP: analytic hierarchy process and PCA: principal component analysis). Typhoons, heavy rain, and earthquakes are considered as three major natural disasters for the development of the DI. A total of 15 input variables from public open-source data (e.g., statistical yearbook of wastewater treatment system, meteorological data and financial status in local governments) were used for the development of a DI for 199 wastewater treatment plants in Korea. The total DI was calculated from the weighted sum of the disaster indices of the three natural disasters (i.e., TI for typhoon, RI for heavy rain, and EI for earthquake). The three disaster indices of each natural disaster were determined from four components, such as possibility of occurrence and expected damages. The relative weights of the four components to calculate the disaster indices (TI, RI and EI) for each of the three natural disasters were also determined from AHP. PCA was used to determine the relative weights of the input variables to calculate the four components. The relative weights of TI, RI and EI to calculate total DI were determined as 0.547, 0.306, and 0.147 respectively.

• International Journal of Computer Science & Network Security
• /
• 제21권5호
• /
• pp.139-150
• /
• 2021

Object orientation has become the predominant paradigm for conceptual modeling (e.g., UML), where the notions of class and object form the primitive building blocks of thought. Classes act as templates for objects that have attributes and methods (actions). The modeled systems are not even necessarily software systems: They can be human and artificial systems of many different kinds (e.g., teaching and learning systems). The UML class diagram is described as a central component of model-driven software development. It is the most common diagram in object-oriented models and used to model the static design view of a system. Objects both carry data and execute actions. According to some authorities in modeling, a certain degree of difficulty exists in understanding the semantics of these notions in UML class diagrams. Some researchers claim class diagrams have limited use for conceptual analysis and that they are best used for logical design. Performing conceptual analysis should not concern the ways facts are grouped into structures. Whether a fact will end up in the design as an attribute is not a conceptual issue. UML leads to drilling down into physical design details (e.g., private/public attributes, encapsulated operations, and navigating direction of an association). This paper is a venture to further the understanding of object-orientated concepts as exemplified in UML with the aim of developing a broad comprehension of conceptual modeling fundamentals. Thinging machine (TM) modeling is a new modeling language employed in such an undertaking. TM modeling interlaces structure (components) and actionality where actions infiltrate the attributes as much as the classes. Although space limitations affect some aspects of the class diagram, the concluding assessment of this study reveals the class description is a kind of shorthand for a richer sematic TM construct.

• 한국BIM학회 논문집
• /
• 제11권1호
• /
• pp.21-30
• /
• 2021

Reinforcing bars, a major component of the pre-fab structure, adheres to the existing on-site assembly method and attempts to develop and commercialize the technology of the pre-assembly method, but the effect is insignificant. Welded Wire / Bar Mat (WBM) has various advantages such as commercialization of rebar through machine manufacturing to improve workability, but it is different from the existing design and the construction method is different from the previous one. Therefore, to maximize the advantages of WBM and improve productivity, manufacturing, transportation, and construction from the design stage should be considered based on BIM from the initial design stage. In this paper, the concept of the design support system for the WBM was established based on the use of BIM in concrete reinforcement and the preliminary research on the WBM. WBM conversion design was performed for the existing prefabricated members, and based on this, the exchange format and system of the master prefabricated model with the WBM design data were set up. As a result of the pilot test, it was found that the traditional reinforcing bar information extracted from the master prefab model has transmitted 100% accurately. As for the WBM information, 100% of the information on the straight reinforcement was transmitted and represented, and the information on the bent reinforcement was found to have a 90% recall in the master BIM tool.

• International Journal of Computer Science & Network Security
• /
• 제22권10호
• /
• pp.73-82
• /
• 2022

Early detection continues to be the mainstay of breast cancer control as well as the improvement of its treatment. Even so, the absence of cancer symptoms at the onset has early detection quite challenging. Therefore, various researchers continue to focus on cancer as a topic of health to try and make improvements from the perspectives of diagnosis, prevention, and treatment. This research's chief goal is development of a system with deep learning for classification of the breast cancer as non-malignant and malignant using mammogram images. The following two distinct approaches: the first one with the utilization of patches of the Region of Interest (ROI), and the second one with the utilization of the overall images is used. The proposed system is composed of the following two distinct stages: the pre-processing stage and the Convolution Neural Network (CNN) building stage. Of late, the use of meta-heuristic optimization algorithms has accomplished a lot of progress in resolving these problems. Teaching-Learning Based Optimization algorithm (TIBO) meta-heuristic was originally employed for resolving problems of continuous optimization. This work has offered the proposals of novel methods for training the Residual Network (ResNet) as well as the CNN based on the TLBO and the Genetic Algorithm (GA). The classification of breast cancer can be enhanced with direct application of the hybrid TLBO- GA. For this hybrid algorithm, the TLBO, i.e., a core component, will combine the following three distinct operators of the GA: coding, crossover, and mutation. In the TLBO, there is a representation of the optimization solutions as students. On the other hand, the hybrid TLBO-GA will have further division of the students as follows: the top students, the ordinary students, and the poor students. The experiments demonstrated that the proposed hybrid TLBO-GA is more effective than TLBO and GA.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권7호
• /
• pp.239-247
• /
• 2022

Maintaining and expanding brand equity is regarded as an essential component of brand development. Effective management of brand equity leads to more opportunities for brand extension and the ability to draw in more customers. Brand equity, in particular, has a positive impact on consumer purchase intention. The purpose of this study is to look into the relationships between brand equity and consumption intention from the perspective of Vietnamese customers of India's COVID-19 vaccine products. Primary data is aggregated from 475 Vietnamese citizens with different occupations and backgrounds 18 years of age or older. The findings of the study show that consumption intention is positively inspired by brand equity, including brand association and brand quality. If consumers perceive high brand equity, it will have a higher impact on promoting consumption intention to the brand. India's COVID-19 vaccine needs to invest more in building brand equity in the Vietnamese market if it wants to increase the consumption choices of Vietnamese people. To create a good brand association and brand quality for India's COVID-19 vaccine, it is necessary to focus on communicating the good properties of the Indian-made vaccine such as safe, high protective effect, high immunity and protection, and long duration of immunity of vaccines.

• Earthquakes and Structures
• /
• 제22권1호
• /
• pp.1-13
• /
• 2022

When a building suffers damages under moderate to severe loading condition, its physical properties such as damping and stiffness parameters will change. There are different practical methods besides various numerical procedures that have successfully detected a range of these changes. Almost all the previous proposed methods used to work with translational components of mode shapes, probably because extracting these components is more common in vibrational tests. This study set out to investigate the influence of using both rotational and translational components of mode shapes, in detecting damages in 3-D steel structures elements. Three different sets of measured components of mode shapes are examined: translational, rotational, and also rotational/translational components in all joints. In order to validate our assumptions two different steel frames with three damage scenarios are considered. An iterative model updating program is developed in the MATLAB software that uses the OpenSees as its finite element analysis engine. Extensive analysis shows that employing rotational components results in more precise prediction of damage location and its intensity. Since measuring rotational components of mode shapes still is not very convenient, modal dynamic expansion technique is applied to generate rotational components from measured translational ones. The findings indicated that the developed model updating program is really efficient in damage detection even with generated data and considering noise effects. Moreover, methods which use rotational components of mode shapes can predict damage's location and its intensity more precisely than the ones which only work with translational data.

• 한국항해항만학회지
• /
• 제46권5호
• /
• pp.409-417
• /
• 2022

The International Association of Lighthouse Authorities (IALA) utilizes a questionnaire to investigate the status of Aids to Navigation (AtoN) around the world. However, results of the IALA questionnaire have limited use because respondent understanding is inconsistent. In addition, there is uncertainty regarding the appropriateness of the questionnaire content. Furthermore, the overall response rate is low. Therefore, the status of AtoN is not clearly understood. AtoN data from around the world are generated hourly. Thus, big data solutions are required to effectively exploit the information. Digitization of analog data is an important component of building big data. Hence, the IALA has developed a Maritime Resource Name (MRN) scheme and an information exchange standard. Here, we used the AtoN information exchange standard and designed an S-201-based big data construction process that could collect and manage global AtoN information. In this study, construction of an IALA AtoN portal was proposed as the core of the construction of the AtoN big data. The process was divided into three stages. IALA AtoN portal is developed by IALA with the goal to provide various meaningful statistical analysis results based on AtoN data while managing AtoN information around the world based on S-201. If an AtoN portal capable of constructing S-201-based big data is developed, then a data collection and storage system that can gather basic S-201 AtoN data from the IALA and global AtoN management agencies could be achieved. Furthermore, insightful statistical analysis of AtoN status worldwide and changes in manufacturing technology will be possible.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.277-296
• /
• 2023

The South Korean ethnic diaspora US lobby shows efficacy as an interest group in generating influence in American foreign and domestic public policy making. The persuasive portrayal of South Korea as a critical Cold War US ally reinforced US amenability to pro-South Korea lobbying. Also, the South Korean US diaspora is a comparatively recent immigrant group, thus its lingering resistance to assimilation facilitates its political mobilization to lobby the US government. One source of this influence includes the foundational legacy of proselytizing Western and particularly American religious social movement representatives in Korean religiosity and society. US protestant Christianity acquired a strong public association with emerging Korean nationalism in response to Japanese imperialism and occupation. Hostility towards Japanese colonialism followed by the threat from Soviet-sponsored, North Korean Communism meant Christianity did not readily become a cultural symbol of excessive external, US interference in South Korean society by South Korean public opinion. The post-Cold War shift in US foreign policy towards targeting so-called rogue state vestiges of the Cold War including North Korea enhanced further South Korea's influence in Washington. Due to essential differences in the perceived historical role of American influence, extrapolation of the South Korean development model is problematic. US hegemony in South Korea indicates that perceived alliance with national self-determination constitutes the core of soft power appeal. Civilizational appeal per se in the form of religious beliefs are not critically significant in promoting American polity influence in target polities in South Korea or, comparatively, in the Middle East. The United States is a perceived opponent of pan-Arab nationalism which has trended towards populist Islamic religious symbolism with the failure of secular nationalism. The pronounced component of evangelical Christianity in American core community nationalism which the Trump campaign exploited is a reflection of this orientation in the US.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.725-731
• /
• 2009

Construction documents are recognized as an essential component for making a decision and supporting on construction processes. In construction, the management of project document is a complex process due to different factors such as document types, stakeholder involvement, document flow, and document flow processes. Therefore, inappropriate management of project documents can cause several impacts on construction work processes such as delay or poor quality of work. Several information and communication technologies (ICT) were proposed to overcome problems concerning document management practice in construction projects. However, the adoption of ICT may have some limitation on the compatibility of specific document workflow. Lack of understanding on designing document system may cause many problems during the use and implementation phase. Thus, this paper proposes the framework that integrates Soft System Methodology (SSM) concept and Integrated Definition Modeling Technique (IDEF) for analyzing document management system in construction project. Research methodology is classified as the case study. Five main construction building projects are selected as case studies. The qualitative data related to problems and processes are collected by interviewing construction project participants such as main contractors, owners, consultants, and designers. The findings from case study show the benefits of using SSM and IDEF. The use of SSM can help identify the problems in managing construction document in rich picture view whereas IDEF can illustrate the document flow in construction project in details. In addition, the idea of integrating these two concepts can be used to identify the root causes of process problems at the information level. As the results, this idea can be applied to analyze and design web-based document management system in the future.